View unanswered posts    View active topics

Board index KnoppMyth Hardware

All times are UTC - 6 hours





Post new topic Reply to topic  Page 1 of 1
  [ 6 posts ] 
Print view Previous topic   Next topic  
Author Message
Search for:
pimpybra
PostPosted: Mon Oct 04, 2004 9:59 pm 
Offline
Joined: Sat Oct 02, 2004 10:39 pm
Posts: 10
Location: Rochester, NY
Greetings all,

After doing some searching here and on google, I am a little confused as to why I am having bad luck w/ my ATI TV Wonder VE card.

I first installed it in a Syntax S635MP Motherboard, with a 1.3ghz (runs at 800mhz) Samuel C3 processor (w/ supposedly built in MPEG encoding).
The frame rate was horrible for watching live tv. About one frame every 2 seconds. 256 Megs of ram, motherboard has 266mhz FSB.

I then installed it in a Duron 800mhz (Overclocked to 1ghz), 1.3 gigs of ram. The frame rate improved, but was at about 10 frames a second, jerky as anything.

I then tried it in my 'main' box, an Athlon 2700XP w/ 512 megs DDR dual channel ram, and it runs GREAT. When watching live tv, it uses 3% cpu.

Does anyone have any clue why it runs so poorly on the other boxes which seem sufficient in my eyes.
Top
 Profile  
 
cesman
 Post subject:
PostPosted: Tue Oct 05, 2004 12:55 am 
Offline
Joined: Fri Sep 19, 2003 7:05 pm
Posts: 5088
Location: Fontana, Ca
I personally would never user a C3 with a software tuner. I think you answered you own question... Not enough CPU horsepower.

_________________
cesman

When the source is open, the possibilities are endless!
Top
 Profile  
 
pimpybra
 Post subject:
PostPosted: Tue Oct 05, 2004 4:06 pm 
Offline
Joined: Sat Oct 02, 2004 10:39 pm
Posts: 10
Location: Rochester, NY
That's fine, C3 chip aside, I don't understand the Duron issue.

Here's a TOP when I am watching live TV. There's ~25% idle CPU.

Code:
top - 17:59:44 up 20 min,  2 users,  load average: 1.95, 0.95, 0.36
Tasks:  78 total,   4 running,  74 sleeping,   0 stopped,   0 zombie
Cpu(s):  66.7% user,   6.2% system,   0.0% nice,  27.2% idle
Mem:   1292720k total,   214144k used,  1078576k free,    25332k buffers
Swap:   128512k total,        0k used,   128512k free,    90284k cached

  PID USER      PR  NI  VIRT  RES  SHR S %CPU %MEM    TIME+  Command

  882 mythtv    19   0 43792  42m  15m R 27.6  3.4   0:54.84 mythfrontend
  876 mythtv    17   0 40672  39m  12m R 23.3  3.1   0:41.90 mythbackend
  879 mythtv    13   0 43792  42m  15m S  9.8  3.4   0:16.18 mythfrontend
  875 mythtv    12   0 40672  39m  12m S  4.9  3.1   0:07.56 mythbackend



Here's a top when I am recording a show, while not watching tv

Code:
top - 18:04:52 up 25 min,  2 users,  load average: 0.35, 0.79, 0.47
Tasks:  72 total,   2 running,  70 sleeping,   0 stopped,   0 zombie
Cpu(s):  17.6% user,   3.0% system,   0.0% nice,  79.4% idle
Mem:   1292720k total,   260332k used,  1032388k free,    26296k buffers
Swap:   128512k total,        0k used,   128512k free,   141072k cached

  PID USER      PR  NI  VIRT  RES  SHR S %CPU %MEM    TIME+  Command

  895 mythtv    18   0 39892  38m  12m R 19.3  3.1   0:17.03 mythbackend
  899 root      15   0   924  924  732 R  7.0  0.1   0:00.09 top
  894 mythtv    10   0 39892  38m  12m S  1.8  3.1   0:03.74 mythbackend



I have DMA enabled, it just seems like it should be able to handle it.
Top
 Profile  
 
Xsecrets
 Post subject:
PostPosted: Tue Oct 05, 2004 4:22 pm 
Offline
Joined: Mon Oct 06, 2003 10:38 am
Posts: 4978
Location: Nashville, TN
well Issac the person who wrote mythtv started with a duron 800 and said it never worked for him on that and he had to upgrade.

_________________
Have a question search the forum and have a look at the KnoppMythWiki.

Xsecrets
Top
 Profile  
 
kdavis11_1
 Post subject:
PostPosted: Tue Oct 05, 2004 6:09 pm 
Offline
Joined: Fri May 28, 2004 5:26 am
Posts: 10
I have a Duron 900 that runs fine as a frontend only machine....800 not enough juice for a backend, unless you move to a PVR-x50.

good luck
Top
 Profile  
 
pimpybra
 Post subject:
PostPosted: Tue Oct 05, 2004 10:19 pm 
Offline
Joined: Sat Oct 02, 2004 10:39 pm
Posts: 10
Location: Rochester, NY
Well, I got the duron 1ghz running. I put in a Nvidia GeForce 2 video card, and installed the nvidia drivers, instead of using the junk old ATI video card tjhat was in there.

And now, instead of using 75%, the CPU is pegged while watching live tv, and it runs smoothly. There is an occasional 'slowdown' now and then, but it is only every now and then.

So yes, the ghz duron can handle it. I might try overclocking it to 1.1 or 1.2 to see if that helps out at all.
Top
 Profile  
 

Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 6 posts ] 


Board index KnoppMyth Hardware

All times are UTC - 6 hours




Who is online

Users browsing this forum: No registered users and 3 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group

Theme Created By ceyhansuyu