hey, so I've got a master backend (I've got a slave backend too, but I don't think it's part of my problem) so on this master backend I've got two ATI TV Wonder VE capture cards, so they're both bttv... well, the video is decent, but not that great... I'm wondering if it could be better, and this might be affecting it... so does anyone know what this means:
Code:
bttv0: timeout: drop=20 irq=101621/101621, risc=0fd4207c, bits: HSYNC OFLOW FDSR
bttv0: reset, reinitialize
bttv0: PLL can sleep, using XTAL (28636363).
and it repeats this with bttv1 and and again with bttv0 and so on, so on.
and just as a side note, this is by /etc/mythtv/modules/bttv:
Code:
alias char-major-81 videodev
options bttv card=64,64 radio=0,0 tuner=2,2
this is /etc/mythtv/modules/bttv0
Code:
alias char-major-81-0 bttv
options bttv card=64 radio=0 tuner=2
and lastly my /etc/mythtv/modules/bttv1
Code:
alias char-major-81-1 bttv
options bttv card=64 radio=0 tuner=2
oh yeah, and this is dmesg | grep bttv:
Code:
root@mythtv:~ # dmesg | grep bttv
bttv: driver version 0.9.15 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 17) at 00:0b.0, irq: 3, latency: 32, mmio: 0xef000000
bttv0: detected: ATI TV Wonder/VE [card=64], PCI subsystem ID is 1002:0003
bttv0: using: ATI TV-Wonder VE [card=64,insmod option]
bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init]
bttv0: using tuner=2
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: PLL: 28636363 => 35468950 .<6>hub.c: new USB device 00:10.1-2, assigned address 2
bttv: Bt8xx card found (1).
bttv1: Bt878 (rev 17) at 00:0d.0, irq: 11, latency: 32, mmio: 0xee000000
bttv1: detected: ATI TV Wonder/VE [card=64], PCI subsystem ID is 1002:0003
bttv1: using: ATI TV-Wonder VE [card=64,autodetected]
bttv1: gpio: en=00000000, out=00000000 in=00ffffff [init]
bttv1: using tuner=19
bttv1: i2c: checking for TDA9875 @ 0xb0... not found
bttv1: i2c: checking for TDA7432 @ 0x8a... not found
bttv1: registered device video1
bttv1: registered device vbi1
bttv1: PLL: 28636363 => 35468950 .. ok
bttv0: PLL can sleep, using XTAL (28636363).
bttv1: PLL can sleep, using XTAL (28636363).
bttv0: timeout: drop=20 irq=101621/101621, risc=0fd4207c, bits: HSYNC OFLOW FDSR
bttv0: reset, reinitialize
bttv0: PLL can sleep, using XTAL (28636363).
bttv1: timeout: drop=14 irq=1464/116751, risc=111f6084, bits: HSYNC OFLOW FDSR
bttv1: reset, reinitialize
bttv1: PLL can sleep, using XTAL (28636363).
bttv1: timeout: drop=14 irq=1465/116786, risc=1cee101c, bits: VSYNC HSYNC OFLOW
bttv0: timeout: drop=36 irq=137779/137779, risc=0724207c, bits: HSYNC OFLOW FDSR
bttv0: reset, reinitialize
bttv0: PLL can sleep, using XTAL (28636363).
bttv0: timeout: drop=36 irq=137786/137786, risc=1cf4401c, bits: VSYNC HSYNC OFLOW
bttv0: reset, reinitialize
bttv0: PLL can sleep, using XTAL (28636363).
bttv0: timeout: drop=52 irq=369883/369883, risc=092f307c, bits: HSYNC OFLOW FDSR
bttv0: reset, reinitialize
bttv0: PLL can sleep, using XTAL (28636363).
bttv0: timeout: drop=52 irq=369886/369886, risc=1cf4401c, bits: VSYNC HSYNC OFLOW
bttv0: reset, reinitialize
bttv0: PLL can sleep, using XTAL (28636363).
bttv0: timeout: drop=66 irq=370374/370374, risc=1ee4907c, bits: HSYNC OFLOW FDSR
bttv0: reset, reinitialize
bttv0: PLL can sleep, using XTAL (28636363).
bttv0: timeout: drop=66 irq=370377/370377, risc=1cf4401c, bits: VSYNC HSYNC OFLOW
bttv0: reset, reinitialize
bttv0: PLL can sleep, using XTAL (28636363).
View unanswered posts
View active topics
KnoppMyth 
Print view
Previous topic Next topic 
LinHES Home
Board index
FAQ
Search
Login 
Register
