| LinHES Forums http://forums.linhes.org/ |
|
| (KM4) PVR-250 not recognized...IRQ10? (long) http://forums.linhes.org/viewtopic.php?f=2&t=456 |
Page 1 of 1 |
| Author: | sometime [ Sat Jan 10, 2004 8:55 pm ] |
| Post subject: | (KM4) PVR-250 not recognized...IRQ10? (long) |
Greetings KnoppMythers! Having problems getting a new PVR-250 recognized on a 1 GHz Athlon (Gigabyte 7Z-MM). And since I'm new to Linux, have been stumbling around not knowing where to look. Dmesg seems to say IRQ 10 being shared by PVR-250, the USB hub, and the network card. Can anyone confirm if this is the problem, or suggest what else to look for (& how)? Has anyone else gotten non-working cards (retail)? I've tried different PCI slots and actually 2 other machines -- I couldnt even boot from the disk in my desktop machine (Asus P4S533) after errorles installs, though I seemed to do better with my wife's old e-machines 500 MHz Celeron with 64 megs of RAM -- at least I got to choose video inputs during configuration, but then black screen & "timeout waiting for data" when live TV selected from Myth. TIA, Alex on the Athlon, lspci -v says in part 00:07.3 USB Controller: VIA Technologies, Inc. USB (rev 16) (prog-if 00 [UHCI]) Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller Flags: bus master, medium devsel, latency 64, IRQ 10 I/O ports at d800 [size=32] Capabilities: <available only to root> 00:07.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40) Subsystem: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] Flags: medium devsel Capabilities: <available only to root> 00:09.0 Multimedia video controller: Internext Compression Inc: Unknown device 0016 (rev 01) Subsystem: Hauppauge computer works Inc.: Unknown device 4009 Flags: medium devsel, IRQ 10 Memory at 10000000 (32-bit, prefetchable) [size=64M] Capabilities: <available only to root> 00:0e.0 Multimedia audio controller: Ensoniq 5880 AudioPCI (rev 03) Subsystem: Giga-byte Technology 5880 AudioPCI On Motherboard 6OXET Flags: bus master, slow devsel, latency 64, IRQ 11 I/O ports at d000 [size=64] Capabilities: <available only to root> 00:0f.0 Ethernet controller: Lite-On Communications Inc LNE100TX (rev 20) Subsystem: Netgear FA310TX Flags: bus master, medium devsel, latency 64, IRQ 10 I/O ports at cc00 [size=256] Memory at dfffff00 (32-bit, non-prefetchable) [size=256] Expansion ROM at dff80000 [disabled] [size=256K] ------------------------ excerpts from dmesg: PCI: PCI BIOS revision 2.10 entry at 0xfdb31, last bus=1 PCI: Using IRQ router VIA [1106/0686] at 00:07.0 PCI: Found IRQ 10 for device 00:09.0 Applying VIA southbridge workaround. PCI: Disabling Via external APIC routing usb-uhci.c: $Revision: 1.275 $ time 17:47:40 Oct 2 2003 usb-uhci.c: High bandwidth mode enabled PCI: Found IRQ 10 for device 00:07.3 PCI: Sharing IRQ 10 with 00:07.2 PCI: Sharing IRQ 10 with 00:0f.0 usb-uhci.c: USB UHCI at I/O 0xd800, IRQ 10 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 Linux Tulip driver version 0.9.15-pre12 (Aug 9, 2002) PCI: Found IRQ 10 for device 00:0f.0 PCI: Sharing IRQ 10 with 00:07.3 PCI: Sharing IRQ 10 with 00:07.2 tulip0: MII transceiver #1 config 3000 status 7829 advertising 01e1. eth0: Lite-On 82c168 PNIC rev 32 at 0xcc00, 02:00:07:E3:55:11, IRQ 10. i2c-core.o: i2c core module i2c-algo-bit.o: i2c bit algorithm module i2c-core.o: driver i2c TV tuner driver registered. i2c-core.o: driver saa7115 registered. i2c-core.o: driver i2c msp3400 driver registered. ivtv: SGarray_size = 200, DSGarray_size = 16 ivtv: Found an iTVC16 based chip PCI: Enabling device 00:09.0 (0000 -> 0002) PCI: Found IRQ 10 for device 00:09.0 ivtv: Bus Mastering is not enabled ivtv: Error detecting PCI card i2c-core.o: driver unregistered: i2c msp3400 driver |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|