Has anybody got this to work, I.E shutdown etc.
I seem to have the 'idle but no count down' message lot of posts on the web but no real solutions, I suppose I will have to have a look at the code to try and see what it is doing.
Probably another broken something on my system.

_________________
--
stinga

as of 17-May-2018
R8.2 - sort of working.
MB: gigabyte GA-P43-ES3G | RAM: 2GB
VGA: PNY Nvidia GT240 1GB
4 x Technisat skystar 2 dvb | 1 x TBS6981 dvb-s2
pata: 1x300Gb | sata: 2x1Tb 2x2Tb
Problems:
TBS6981 Does not work.

Works perfectly for me. /usr/LH/bin/mythwelcome-config.py should set the db setting correctly for you.

I will try that and I have, but I think the settings were correct.

_________________
--
stinga

as of 17-May-2018
R8.2 - sort of working.
MB: gigabyte GA-P43-ES3G | RAM: 2GB
VGA: PNY Nvidia GT240 1GB
4 x Technisat skystar 2 dvb | 1 x TBS6981 dvb-s2
pata: 1x300Gb | sata: 2x1Tb 2x2Tb
Problems:
TBS6981 Does not work.

I had the exact same problem when I first set up 7.2 and found that, FOR ME, that I had to "unlock" the system. On the mythwelcome page, bring up the menu and select "Unlock Shutdown". This should then allow your system to go to sleepy poos.

Reference: http://www.mythtv.org/wiki/Mythwelcome

_________________
Girkers