View unanswered posts    View active topics

All times are UTC - 6 hours





Post new topic Reply to topic  [ 13 posts ] 
Print view Previous topic   Next topic  
Author Message
Search for:
PostPosted: Fri Nov 20, 2009 1:54 am 
Offline
Joined: Tue Mar 22, 2005 9:18 pm
Posts: 1422
Location: Brisbane, Queensland, Australia
I have a problem whereby the mythfrontend log is getting filled up really quickly. to stop the system from crashing I have increased the partition size, however the problem still exists.

The constant in the logs looks like this:
Code:
2009-11-20 17:00:54.721 [mpeg2video @ 0xb72d8de4]00 motion_type at 4 31
2009-11-20 17:00:54.721 [mpeg2video @ 0xb72d8de4]00 motion_type at 4 32
2009-11-20 17:00:54.721 [mpeg2video @ 0xb72d8de4]00 motion_type at 4 33
2009-11-20 17:00:54.722 [mpeg2video @ 0xb72d8de4]00 motion_type at 4 34
2009-11-20 17:00:54.722 [mpeg2video @ 0xb72d8de4]00 motion_type at 4 35
2009-11-20 17:01:10.098 [mpeg2video @ 0xb72d8de4]ac-tex damaged at 35 10
2009-11-20 17:01:25.257 [mpeg2video @ 0xb72d8de4]00 motion_type at 16 20
2009-11-20 17:01:45.797 [mpeg2video @ 0xb72d8de4]ac-tex damaged at 19 9
2009-11-20 17:02:16.075 Received a remote 'Clear Cache' request
2009-11-20 17:07:37.292 [mpeg2video @ 0xb72d8de4]invalid cbp at 28 22
2009-11-20 17:07:37.293 [mpeg2video @ 0xb72d8de4]mb incr damaged
2009-11-20 17:07:37.293 [mpeg2video @ 0xb72d8de4]invalid cbp at 13 5
2009-11-20 17:07:37.293 [mpeg2video @ 0xb72d8de4]00 motion_type at 6 6
2009-11-20 17:07:37.293 [mpeg2video @ 0xb72d8de4]00 motion_type at 24 7
2009-11-20 17:07:37.293 [mpeg2video @ 0xb72d8de4]invalid mb type in P Frame at 4 8
2009-11-20 17:07:37.293 [mpeg2video @ 0xb72d8de4]invalid mb type in P Frame at 4 9
2009-11-20 17:07:37.293 [mpeg2video @ 0xb72d8de4]invalid mb type in P Frame at 17 10
2009-11-20 17:07:37.293 [mpeg2video @ 0xb72d8de4]00 motion_type at 3 11
2009-11-20 17:07:37.293 [mpeg2video @ 0xb72d8de4]ac-tex damaged at 3 12
2009-11-20 17:07:37.294 [mpeg2video @ 0xb72d8de4]00 motion_type at 15 13
2009-11-20 17:07:37.294 [mpeg2video @ 0xb72d8de4]00 motion_type at 5 14
2009-11-20 17:07:37.294 [mpeg2video @ 0xb72d8de4]00 motion_type at 7 15
2009-11-20 17:07:37.294 [mpeg2video @ 0xb72d8de4]ac-tex damaged at 5 16
2009-11-20 17:07:37.294 [mpeg2video @ 0xb72d8de4]00 motion_type at 4 17
2009-11-20 17:07:37.294 [mpeg2video @ 0xb72d8de4]00 motion_type at 15 18
2009-11-20 17:07:37.294 [mpeg2video @ 0xb72d8de4]ac-tex damaged at 2 19
2009-11-20 17:07:37.294 [mpeg2video @ 0xb72d8de4]00 motion_type at 10 20
2009-11-20 17:07:37.294 [mpeg2video @ 0xb72d8de4]invalid cbp at 9 21


Googling leads me in circles with a problem with MythTV back in version 0.19 that has apparently been fixed. Could anyone suggest as to what may be causing this problem?

Thanks and looking forward to replies.

_________________
Girkers


Top
 Profile  
 
PostPosted: Fri Nov 20, 2009 6:26 pm 
Offline
Joined: Sun Aug 28, 2005 7:07 pm
Posts: 821
Location: Melbourne, Australia
Girkers wrote:
Could anyone suggest as to what may be causing this problem?


Hi Girkers,
Felt like being a smart arse and saying "well, looks like your ac-tex is damaged. Leave it with us: Pick it up Thursdee" but thought better of it :-)

I had this problem in the past too. Biggest pain was that it filled the damned root partition (corrupted the database, prevented login). As a temp measure, I moved the log file to /myth/tmp and created a symlink. It would therefore take a lot longer to fill and cause a lot less damage when/if it did.

Investigated several solutions, but because it happens so quickly, the only way to stop it is to use logrotate. Set it to rotate at a particular size, and that should at least keep your box running while you look into reducing the ridiculous number of error messages.

Regards

Mike

P.S. If you delete the log file it won't log anything

_________________
*********************
LinHES 7.4
Australian Dragon
*********************


Top
 Profile  
 
 Post subject:
PostPosted: Fri Nov 20, 2009 7:50 pm 
Offline
Joined: Tue Mar 22, 2005 9:18 pm
Posts: 1422
Location: Brisbane, Queensland, Australia
I have already done all those things, my root partition is 20GB now and I have to clear the log file every couple of days and log rotate is working fine.

I will have to wait and see if anyone else comes up with something. I am thinking that it could be the driver for my DVB card, but I have really no evidence to support that.

_________________
Girkers


Top
 Profile  
 
 Post subject:
PostPosted: Sat Nov 21, 2009 3:00 am 
Offline
Joined: Sun Aug 28, 2005 7:07 pm
Posts: 821
Location: Melbourne, Australia
Girkers wrote:
it could be the driver for my DVB card, but I have really no evidence to support that.


Well, what card is it?

Mike

_________________
*********************
LinHES 7.4
Australian Dragon
*********************


Top
 Profile  
 
 Post subject:
PostPosted: Wed Nov 25, 2009 5:31 pm 
Offline
Site Admin
Joined: Fri Sep 19, 2003 6:37 pm
Posts: 2659
Location: Whittier, Ca
I'm not DVB expert, I'd suspect an issue w/ the card or signal.


Top
 Profile  
 
 Post subject:
PostPosted: Thu Nov 26, 2009 8:57 pm 
Offline
Joined: Tue Mar 22, 2005 9:18 pm
Posts: 1422
Location: Brisbane, Queensland, Australia
Thanks Cecil and Mike for your input, some hardware details that may help shed some light on the situation.

I have two dual tuners, a HDHR and a DVICO Dual Digtal 4 Rev 2. The DVICO is the primary recording device whilst the HDHR is the primary live viewing.

Whenever I watch TV I get a blockiness every now and then, but the signal is reported to be above 90% with no BE errors reported. When I look at the details of the HDHR via my Windoze box almost 100% on all.

I am outputing via Composite to a TV via a nVidia 8400 GS PCI-E card, I three HDDs with two formatted as XFS and the remainder of the Boot partition is EXT3.

Where else could I look that I may be able to find the cause?

_________________
Girkers


Top
 Profile  
 
 Post subject:
PostPosted: Thu Nov 26, 2009 9:10 pm 
Offline
Joined: Sun Sep 04, 2005 7:48 pm
Posts: 264
Location: Perth, Australia
Girkers,

I've got this error in the past, mostly on SBS, when the DVB PCI card (avermedia a777) is having issues (be it signal or something else). It led me to purchase the HDHR, which does not seem to have this reception error.

So, i have the HDHR as the priority recording device, and the DVB PCI cards only record when there is a third program simultaneously.. not that often on free to air! :)

Can you confirm that this problem still occurs when using only the HDHR? If so, your problem is not the same as mine. Have you physically looked at your aerial recently?

I did the ac-tex-google dance that you did, but all i could determine was that whenver the picture went blocky there was the ac-tex/mv not avaiable errors in the logs...

Nathan

_________________
LinHES: R6 | MB: Asus M3N-H/HDMI | CPU: AMD ??Mhz
Capture: 2xHDHR DVB-T
Graphics: Onboard 8300|PSU: Corsair vx450w
Cooling: Zalman cu?,
Display: Benq xx projector


Top
 Profile  
 
 Post subject:
PostPosted: Thu Nov 26, 2009 9:21 pm 
Offline
Joined: Tue Mar 22, 2005 9:18 pm
Posts: 1422
Location: Brisbane, Queensland, Australia
I know my aerial is fine as I had it replaced and all the coax late last year and I can watch a stream from the HDHR on my windows box fine (just checked the cricket score in HD).

I will try and swap the priorites of the tuners and see how I go.

Thanks

_________________
Girkers


Top
 Profile  
 
 Post subject:
PostPosted: Thu Nov 26, 2009 9:24 pm 
Offline
Joined: Sun Sep 04, 2005 7:48 pm
Posts: 264
Location: Perth, Australia
Also, if there is a problem with recording/watchintv from HDHR, you might want to check your firmware (i know windowze is functioning, but there may be something in it)... and the libs for HDHR on LH might have been updated?

_________________
LinHES: R6 | MB: Asus M3N-H/HDMI | CPU: AMD ??Mhz
Capture: 2xHDHR DVB-T
Graphics: Onboard 8300|PSU: Corsair vx450w
Cooling: Zalman cu?,
Display: Benq xx projector


Top
 Profile  
 
 Post subject:
PostPosted: Thu Nov 26, 2009 9:29 pm 
Offline
Joined: Tue Mar 22, 2005 9:18 pm
Posts: 1422
Location: Brisbane, Queensland, Australia
I have just deleted the two DVICO tuners and reinsterted (after having to fix the tuner table). I also set the input priority on the HDHR higher than the DVICO and we will see how it goes.

_________________
Girkers


Top
 Profile  
 
 Post subject:
PostPosted: Fri Nov 27, 2009 10:03 pm 
Offline
Joined: Tue Mar 22, 2005 9:18 pm
Posts: 1422
Location: Brisbane, Queensland, Australia
Found some extra messages in my log that will be filling up quicker than the previous messages. The one I am getting now is:

Code:
LiveTV forcing JumpTo 1


and according to this bug report http://www.mythtv.org/pipermail/mythtv-commits/2009-June/053167.html it has been fixed in 0.22.

Looks like I am going to BETA!

_________________
Girkers


Top
 Profile  
 
 Post subject:
PostPosted: Sat Nov 28, 2009 5:05 am 
Offline
Joined: Sun Sep 04, 2005 7:48 pm
Posts: 264
Location: Perth, Australia
ive been on svn for months now (since i got the hdhomerun), and it works a treat! beware the db upgrade, without a db backup, there aint no turning back... but, thankfully svn has been working well for me (well the functions i use anyway).

_________________
LinHES: R6 | MB: Asus M3N-H/HDMI | CPU: AMD ??Mhz
Capture: 2xHDHR DVB-T
Graphics: Onboard 8300|PSU: Corsair vx450w
Cooling: Zalman cu?,
Display: Benq xx projector


Top
 Profile  
 
 Post subject:
PostPosted: Sun Nov 29, 2009 4:31 am 
Offline
Joined: Sun Aug 28, 2005 7:07 pm
Posts: 821
Location: Melbourne, Australia
Girkers wrote:
DVICO Dual Digtal 4 Rev 2.


I had a lot of trouble with LinHES and this card. Chris Pascoe's driver is not used, and there are a lot of timeouts in the second tuner.

Mike

_________________
*********************
LinHES 7.4
Australian Dragon
*********************


Top
 Profile  
 

Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 13 posts ] 


All times are UTC - 6 hours




Who is online

Users browsing this forum: No registered users and 26 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group

Theme Created By ceyhansuyu