LinHES Forums
http://forums.linhes.org/

Program #999 not found in PAT!
http://forums.linhes.org/viewtopic.php?f=21&t=22170		 Page 1 of 1
Author:  Girkers [ Sun Jun 26, 2011 10:54 pm ]
Post subject:  Program #999 not found in PAT!
Could someone help me out with this error message I am getting in my Backend logs. I was installing another HDHomeRun (Kaiser Baas Network TV Tuner) onto my network and I was looking into the logs and found continual error messages like this:

Code:
2011-06-27 14:40:50.305 Desired program #1025 not found in PAT.
                        Can Not create single program PAT.
2011-06-27 14:41:02.333 Program #1025 not found in PAT!
Program Association Table
 PSIP tableID(0x0) length(29) extension(0x604)
      version(1) current(1) section(0) last_section(0)
         tsid: 1540
 programCount: 5
  program number     0 has PID 0x  10   data  0x 0 0x 0 0xe0 0x10
  program number  1601 has PID 0x 101   data  0x 6 0x41 0xe1 0x 1
  program number  1605 has PID 0x 100   data  0x 6 0x45 0xe1 0x 0
  program number  1607 has PID 0x 106   data  0x 6 0x47 0xe1 0x 6
  program number  1608 has PID 0x 107   data  0x 6 0x48 0xe1 0x 7

2011-06-27 14:41:02.338 Program #1025 not found in PAT!
Program Association Table
 PSIP tableID(0x0) length(29) extension(0x604)
      version(1) current(1) section(0) last_section(0)
         tsid: 1540
 programCount: 5
  program number     0 has PID 0x  10   data  0x 0 0x 0 0xe0 0x10
  program number  1601 has PID 0x 101   data  0x 6 0x41 0xe1 0x 1
  program number  1605 has PID 0x 100   data  0x 6 0x45 0xe1 0x 0
  program number  1607 has PID 0x 106   data  0x 6 0x47 0xe1 0x 6
  program number  1608 has PID 0x 107   data  0x 6 0x48 0xe1 0x 7

2011-06-27 14:41:02.344 DTVSM(12103C69-0) Error: Wrong PMT; pmt->pn(1601) desired(1025)
2011-06-27 14:41:02.345 DTVSM(12103C69-0) Error: Wrong PMT; pmt->pn(1601) desired(1025)
2011-06-27 14:41:02.814 ProcessPAT: Program not found in PAT.
                        Rescan your transports.
2011-06-27 14:41:02.815 Desired program #1025 not found in PAT.
                        Can Not create single program PAT.
2011-06-27 14:41:02.815 ProcessPAT: Program not found in PAT.
                        Rescan your transports.
2011-06-27 14:41:02.816 Desired program #1025 not found in PAT.
                        Can Not create single program PAT.


Whilst TV works as expected, I don't know what these messages are and can I get rid of them.

Thanks
Author:  RacerX [ Mon Jun 27, 2011 9:06 am ]
Post subject: 
I think you need to rescan your channels, that should straightened it out....
Author:  Girkers [ Mon Jun 27, 2011 9:07 am ]
Post subject: 
Nope, did that about 5 or 6 times, including remove the Transports and channels from the DB directly to see if that made a difference.

Thanks for the suggestion though.
Author:  RacerX [ Mon Jun 27, 2011 8:12 pm ]
Post subject: 
Myth has a table dtv_multiplex that stores the multiplex information for each channel. If there's a difference between the data in this table and the data from over the cable you'll see this error. Normally doing a channel scan fixes it.

However, there are some other possibilities. First, the cable provider doesn't send this information out all the time. Second, the data was corrupt when you saw this error. Keep an eye on the log and look for a pattern...
Page 1 of 1 All times are UTC - 6 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/