I am having a strange issue with file shares and I am new to LinHes after coming over from years of Mythbuntu. I installed LinHes 8.1 on a test hard drive and got it up and working perfectly. After getting confident in it, I took out the test hard drive, swapped it out for my working hard drive, installed it clean, ran all the setup added a storage drive and its working perfectly. Except I cant access the file shares. If i turn off NFS and Samba the PC disappears from windows network browsers, If i enable them both, the Pc reappears but there is no share available. I am not familiar enough with Linhes to trouble shoot it just yet. Any help would be appreciated. I cant figure out what I did differently when installing my test drive to my production drive, I could swear I set them up the same...
I ran these commands
Quote:
/etc/rc.d/samba start and
testparm /etc/samba/smb.conf
after searching the forum, but am not sure what to make of it. Workgroup is my network.
/etc/rc.d/samba start
testparm /etc/samba/smb.conf
Quote:
[root@mythbox jeremy]# /etc/rc.d/samba start
bash: /etc/rc.d/samba: No such file or directory
[root@mythbox jeremy]# testparm /etc/samba/smb.conf
testparm: /usr/lib/libtalloc.so.2: no version information available (required by testparm)
testparm: /usr/lib/libtalloc.so.2: no version information available (required by /usr/lib/samba/libpopt_samba3.so)
testparm: /usr/lib/libtalloc.so.2: no version information available (required by /usr/lib/libsamba-util.so.0)
testparm: /usr/lib/libtalloc.so.2: no version information available (required by /usr/lib/libsmbconf.so.0)
testparm: /usr/lib/libtalloc.so.2: no version information available (required by /usr/lib/samba/libutil_cmdline.so)
testparm: /usr/lib/libtalloc.so.2: no version information available (required by /usr/lib/libtevent.so.0)
testparm: /usr/lib/libtalloc.so.2: no version information available (required by /usr/lib/libtevent.so.0)
testparm: /usr/lib/libtalloc.so.2: no version information available (required by /usr/lib/samba/libsmbregistry.so)
testparm: /usr/lib/libtalloc.so.2: no version information available (required by /usr/lib/samba/libinterfaces.so)
testparm: /usr/lib/libtalloc.so.2: no version information available (required by /usr/lib/libtevent-util.so.0)
testparm: /usr/lib/libtalloc.so.2: no version information available (required by /usr/lib/samba/libdbwrap.so)
testparm: /usr/lib/libtalloc.so.2: no version information available (required by /usr/lib/samba/libCHARSET3.so)
testparm: /usr/lib/libtalloc.so.2: no version information available (required by /usr/lib/samba/liberrors.so)
testparm: /usr/lib/libtalloc.so.2: no version information available (required by /usr/lib/samba/libutil_tdb.so)
testparm: /usr/lib/libtalloc.so.2: no version information available (required by /usr/lib/libndr.so.0)
testparm: /usr/lib/libtalloc.so.2: no version information available (required by /usr/lib/samba/libcli_smb_common.so)
testparm: /usr/lib/libtalloc.so.2: no version information available (required by /usr/lib/samba/libsamba3-util.so)
testparm: /usr/lib/libtalloc.so.2: no version information available (required by /usr/lib/samba/libsamba-sockets.so)
testparm: /usr/lib/libtalloc.so.2: no version information available (required by /usr/lib/samba/libsamba-security.so)
testparm: /usr/lib/libtalloc.so.2: no version information available (required by /usr/lib/samba/libtdb-wrap.so)
testparm: /usr/lib/libtalloc.so.2: no version information available (required by /usr/lib/samba/libsmb_transport.so)
testparm: /usr/lib/libtalloc.so.2: no version information available (required by /usr/lib/libsamba-hostconfig.so.0)
testparm: /usr/lib/libtalloc.so.2: no version information available (required by /usr/lib/libndr-standard.so.0)
testparm: /usr/lib/libtalloc.so.2: no version information available (required by /usr/lib/samba/libsecrets3.so)
testparm: /usr/lib/libtalloc.so.2: no version information available (required by /usr/lib/samba/libutil_ntdb.so)
testparm: /usr/lib/libtalloc.so.2: no version information available (required by /usr/lib/libgensec.so.0)
testparm: /usr/lib/libtalloc.so.2: no version information available (required by /usr/lib/libndr-nbt.so.0)
testparm: /usr/lib/libtalloc.so.2: no version information available (required by /usr/lib/samba/libcliauth.so)
testparm: /usr/lib/libtalloc.so.2: no version information available (required by /usr/lib/samba/libsamba-modules.so)
testparm: /usr/lib/libtalloc.so.2: no version information available (required by /usr/lib/libsamba-credentials.so.0)
testparm: /usr/lib/libtalloc.so.2: no version information available (required by /usr/lib/samba/libndr-samba.so)
testparm: /usr/lib/libtalloc.so.2: no version information available (required by /usr/lib/samba/libasn1util.so)
testparm: /usr/lib/libtalloc.so.2: no version information available (required by /usr/lib/libsamdb.so.0)
testparm: /usr/lib/libtalloc.so.2: no version information available (required by /usr/lib/samba/libauthkrb5.so)
testparm: /usr/lib/libtalloc.so.2: no version information available (required by /usr/lib/samba/libsamdb-common.so)
testparm: /usr/lib/libtalloc.so.2: no version information available (required by /usr/lib/samba/libldbsamba.so)
testparm: /usr/lib/libtalloc.so.2: no version information available (required by /usr/lib/samba/libkrb5samba.so)
testparm: /usr/lib/libtalloc.so.2: no version information available (required by /usr/lib/libldb.so.1)
testparm: /usr/lib/libtalloc.so.2: no version information available (required by /usr/lib/samba/libcli-ldap-common.so)
testparm: /usr/lib/libtalloc.so.2: no version information available (required by /usr/lib/samba/libauth_sam_reply.so)
testparm: /usr/lib/libtalloc.so.2: no version information available (required by /usr/lib/libndr-krb5pac.so.0)
Load smb config files from /etc/samba/smb.conf
rlimit_max: increasing rlimit_max (1024) to minimum Windows limit (16384)
WARNING: Ignoring invalid value 'share' for parameter 'security'
Can't find include file /home/mythtv/templates/user.shares
Processing section "[WDCWD2500BEKT-00PVMT0_WD-WX81A91X8210]"
Processing section "[myth]"
Processing section "[WDCWD30EFRX-68AX9N0_WD-WMC1T1133384]"
Processing section "[home]"
Loaded services file OK.
WARNING: You have some share names that are longer than 12 characters.
These may not be accessible to some older clients.
(Eg. Windows9x, WindowsMe, and smbclient prior to Samba 3.0.)
Server role: ROLE_STANDALONE
Press enter to see a dump of your service definitions
[global]
server string = mythbox
log file = /var/log/samba/log.%m
max log size = 50
load printers = No
printcap name = /dev/null
dns proxy = No
idmap config * : backend = tdb
printing = bsd
print command = lpr -r -P'%p' %s
lpq command = lpq -P'%p'
lprm command = lprm -P'%p' %j
[WDCWD2500BEKT-00PVMT0_WD-WX81A91X8210]
path = /data/storage/WDCWD2500BEKT-00PVMT0_WD-WX81A91X8210
force user = mythtv
force group = mythtv
read only = No
create mask = 0755
guest only = Yes
guest ok = Yes
veto files = "/mysql/" "/srv/"
[myth]
path = /myth
force user = mythtv
force group = mythtv
read only = No
create mask = 0755
guest only = Yes
guest ok = Yes
veto files = "/mysql/" "/srv/"
[WDCWD30EFRX-68AX9N0_WD-WMC1T1133384]
path = /data/storage/WDCWD30EFRX-68AX9N0_WD-WMC1T1133384
force user = mythtv
force group = mythtv
read only = No
create mask = 0755
guest only = Yes
guest ok = Yes
veto files = "/mysql/" "/srv/"
[home]
path = /home/mythtv
force user = mythtv
force group = mythtv
create mask = 0755
guest only = Yes
guest ok = Yes
[root@mythbox jeremy]#
View unanswered posts
View active topics
Print view
Previous topic Next topic 
LinHES Home
Board index
FAQ
Search
Login 
Register
