View unanswered posts    View active topics

All times are UTC - 6 hours





Post new topic Reply to topic  [ 3 posts ] 
Print view Previous topic   Next topic  
Author Message
Search for:
PostPosted: Thu Jan 05, 2017 6:10 pm 
Offline
Joined: Thu Jan 05, 2017 5:04 pm
Posts: 1
I keep getting the error: "Failed to get D-Bus connection: Operation not permitted" trying to do perfectly reasonable SysAdmin thing as root including:
Changing run levels with systemctl
Installing lm_sensors
# systemctl list-units (list-unit-files works)
Modifying some services (not all)
# journalctl (systemd-journald.service not running, can't be enabled with systemctl because "The unit files have no [Install] section.")
...and others I can't recall because it happens a lot..

This is new 8.4 install on new ESC BSWI-D2-N3050 motherboard (dual core celeron N3050), 4GB. There are 2 drives--one SSD with everything but media storage and a 2 TB USB mechanical for that. I have tested it recording four simultaneous HD MPEG streams while playing one and it works fine. other than changing the drive and partition layout it's pretty stock at this point, with no extras (lm_sensors was the first I was trying to install to quiet the fan).

I have installed twice (screwed something up while migrating data to second drive) and had the problem both times. I have run pacman -Syy several time and it syncs the database, but hasn't installed anything, which in itself seems strange. I have had sporatic interaction with *nix's over the last two decades, but not to much experience with systemd or d-bus and reading about the former in particular hurts my head, so I'm hoping someone has some advice here.

Seems significant to me that I can't enable journald because there is something absent with the file--is there some things missing from the install? Also, I would have expected pacman to install something by now.


Top
 Profile  
 
PostPosted: Fri Jan 06, 2017 2:15 pm 
Offline
Joined: Fri Jul 21, 2006 11:12 pm
Posts: 993
Location: SC
LinHES uses runit for running services not systemd.

There have been no new packages pushed to the release repo since the R8.4.2 ISO was released.


Top
 Profile  
 
PostPosted: Fri Jun 23, 2017 12:51 am 
Offline
Joined: Fri Nov 19, 2004 11:58 pm
Posts: 87
I get the same error when running sensors-detect:
Code:
[root@mythtvquad ~]# sensors-detect
[b]Failed to get D-Bus connection: Operation not permitted[/b]
# sensors-detect revision $Revision$
# System: BIOSTAR Group A770E3
# Kernel: 4.9.31-1-ARCH x86_64
# Processor: AMD Phenom(tm) II X2 560 Processor (16/4/3)
...


Not sure exactly where the issue is since the touch point is at a low level.


Top
 Profile  
 

Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 


All times are UTC - 6 hours




Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group

Theme Created By ceyhansuyu