LinHES Forums http://forums.linhes.org/ |
|
[SOLVED] Keyboard Malfunctions when PVR-150 is Installed http://forums.linhes.org/viewtopic.php?f=22&t=22269 |
Page 1 of 1 |
Author: | gatorback [ Fri Oct 07, 2011 4:29 pm ] |
Post subject: | [SOLVED] Keyboard Malfunctions when PVR-150 is Installed |
A Dell Precision 370 was outfitted with LH 6.02. I tested all the serial ports (Streamzap remote), keyboard, & mouse. I uploaded a test video and that ran well. Plugged headphones into front and rear headphone ports to confirm sound. LH works well. The video capture card arrived later and I just tried to install it. The problem is the keyboard malfunctions when I install the video capture card (PVR-150). The malfunction is that the arrow keys and alt-x does not work. The only key that works is the F2, which toggles the verbose feedback screen. Remove the PVR-150, reboot and keyboard can be used to navigate the menus again. Tested PCI slots 3&4 with the same results. I don't think that I can configure the DVR \ capture without the keyboard: I need to get to the Alt-S menu to configure the PVR-150. My understanding is that this hardware is Tier 1. If you have seen this problem before please comment. The last line item is the PVR-150. Quote: $ lspci 00:00.0 Host bridge: Intel Corporation 82925X/XE Memory Controller Hub (rev 04) 00:01.0 PCI bridge: Intel Corporation 82925X/XE PCI Express Root Port (rev 04) 00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 (rev 03) 00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03) 00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03) 00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03) 00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03) 00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d3) 00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03 ) 00:1f.0 ISA bridge: Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge (rev 03) 00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation 82801FR/FRW (ICH6R/ICH6RW) SATA Controller (rev 03) 00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03) 01:00.0 VGA compatible controller: ATI Technologies Inc RV370 5B64 [FireGL V3100 (PCIE)] (rev 80) 01:00.1 Display controller: ATI Technologies Inc RV370 5B64 [FireGL V3100 (PCIE)] (Secondary) (rev 80) 02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751 Gigabit Ethernet PCI Express (rev 01) 04:01.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01) Tried my Lenovo wireless keyboard (known to work with my primary box), but no joy. Quote: [root@dotmyth ~]# lsusb
Bus 005 Device 002: ID 0e9c:0000 Streamzap, Inc. Streamzap Remote Control Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 002: ID 17ef:6014 Lenovo Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Update: Tried to reinstall with card seated. No joy. Downloading R6.04 to attempt to install. |
Author: | mattbatt [ Fri Oct 07, 2011 7:42 pm ] |
Post subject: | |
Does the keyboard work in BIOS? When you get the boot screen there is a line that says press____ for options. In the options I believe there is a "safe mode" . The only thing I can think of is old school IRQ interrupts. Is there an ir blaster on the 150 it might be sending out a bunch of ir noise. My streamzap reciever has an led on the top that blinks whenever it sees any remote. What does ot do with the card in? |
Author: | gatorback [ Fri Oct 07, 2011 8:41 pm ] |
Post subject: | |
I've reinstalled R6.02 and then installed R6.04 in the hope that the problem would be resolved. No joy. @mattbatt: yes the keyboard does work in BIOS. In fact, the keyboard does work, only when I press F2 to put it in verbose mode. In this mode, I can see the typed characters on the screen. This leads me to believe communication between the keyboard and the kernel is OK. I removed the Streamzap receiver to ensure that it is not a problem. I find it ironic (and irratating) the WinTV-PVR-150 26582 LF is the final component of the system and seems to goober up, what is otherwise a perfectly working system. |
Author: | gatorback [ Fri Oct 07, 2011 9:02 pm ] |
Post subject: | SOLVED |
mihanson has solved this problem: Add this snippet to /etc/X11/xorg.conf Code: Section "ServerFlags"
Option "AutoAddDevices" "False" EndSection This particular variant of the PVR-150 is a known troublemaker: http://knoppmyth.net/phpBB2/viewtopic.php?t=19904&highlight=26582 Hopefully, someone will comment on what this snippet does any any potential 'gotchas'. I do not know what this configuration snippet does \ controls |
Page 1 of 1 | All times are UTC - 6 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |