All things happen @ (too) late hours
| LinHES Forums http://forums.linhes.org/ |
|
| Monitorix not working after upgrade to 7.1 - Resolved http://forums.linhes.org/viewtopic.php?f=22&t=22341 |
Page 1 of 2 |
| Author: | tscholl [ Fri Nov 25, 2011 3:30 pm ] |
| Post subject: | Monitorix not working after upgrade to 7.1 - Resolved |
After upgrading to 7.1 monitorix fails on startup. I tried doing an upgrade and install of the monitorix package. pacman -Su monitorix It checked the package, confirmed it was up todate and then reinstalled it. But when I try to start it I get the following messages. Code: [root@mythtv etc]# /etc/rc.d/monitorix start :: Starting Monitorix [BUSY] :: Stopping Cron Daemon [DONE] :: Starting Cron Daemon [FAIL] [DONE] Any suggestions? Now sure why I am getting the BUSY status. It's not running. |
|
| Author: | graysky [ Fri Nov 25, 2011 4:18 pm ] |
| Post subject: | |
Look in the logs /var/log/monitorix |
|
| Author: | tscholl [ Fri Nov 25, 2011 5:51 pm ] |
| Post subject: | |
Looked for a monitorix log in /var/log but none exist there. Also did a Code: find . -name monitorix.log
Didn't find any logs anywhere for monitorix |
|
| Author: | graysky [ Fri Nov 25, 2011 6:00 pm ] |
| Post subject: | |
Mine doesn't have the .log extension... |
|
| Author: | tscholl [ Fri Nov 25, 2011 6:24 pm ] |
| Post subject: | |
Nothing monitorix at all in /var/log All the other monitorix are either directorys, crontab, or scripts |
|
| Author: | graysky [ Fri Nov 25, 2011 6:40 pm ] |
| Post subject: | |
K... it's been a while since I made that PKGBUILD and frankly, I haven't touched it since then. My best advice is to take the one I maintain in the AUR and adapt it to the setup LH uses. https://aur.archlinux.org/packages.php?ID=33911 EDIT: wait a sec, looks like the PKG is in the official linhes repo? http://knoppmyth.net/phpBB2/viewtopic.p ... c&start=30 EDIT2: ack, it's a pretty old version, maybe you're better off talking my original suggestion. |
|
| Author: | tscholl [ Fri Nov 25, 2011 7:03 pm ] |
| Post subject: | |
Ok so grab the new package and them follow your original thread "HOWTO: Setup Monitorix on R6 (rrdtool system monitor)" ? That's the thread that I used to do my original install. can edit and use the PKGBUILD file in your original tarball? |
|
| Author: | graysky [ Wed Feb 29, 2012 5:42 pm ] |
| Post subject: | Re: Monitorix not working after upgrade to 7.1 |
Wow, REALLY late reply. Missed your post. No, the howto I wrote is out-of-date. Any package on LH should be build/managed by pacman. Perhaps one of the dev's can update the LH monitorix PKGBUILD. |
|
| Author: | TVBox [ Thu Mar 01, 2012 1:43 am ] |
| Post subject: | Re: Monitorix not working after upgrade to 7.1 |
https://wiki.archlinux.org/index.php/Monitorix |
|
| Author: | graysky [ Thu Mar 01, 2012 3:20 am ] |
| Post subject: | Re: Monitorix not working after upgrade to 7.1 |
TVBox wrote: https://wiki.archlinux.org/index.php/Monitorix That won't help LH users a whole lot since LH uses a different init system for daemons. I am also unfamiliar with which paths LH uses for serving up http (been too long). |
|
| Author: | tscholl [ Tue May 22, 2012 12:28 pm ] |
| Post subject: | Re: Monitorix not working after upgrade to 7.1 |
See Updated instructions at the bottom of this post Ok I had some free time to play around with this and this is what I found. The monitorix package installs in directory /srv/http/monitorix Linhes is expecting to find monitorix at /data/srv/httpd/htdocs/monitorix , monitorix.cgi at /data/srv/httpd/htdocs/cgi-bin , and data at /data/srv/httpd/htdocs/monitorix/imgs I copied the contents of /srv/http/monitorix to /data/srv/httpd/htdocs/monitorix the contents of /srv/http/cgi-bin to /data/srv/httpd/htdocs/cgi-bin Then created a link to imgs at /data/srv/httpd/htdocs/monitorix to /srv/http/monitorix/imgs Code: cd /data/srv/httpd/htdocs/monitorix ln -s /srv/http/monitorix/imgs imgs If you removed montorix from startup you just need to run /etc/rc.d/monitorix start And you should be good to go. Revised instructions: tscholl wrote: Updated instructions Code: copy /srv/http/cgi-bin/monitorix.cgi to /data/srv/httpd/htdocs/cgi-bin/ cd /data/srv/httpd/htdocs/ ln -s /srv/http/monitorix monitorix That's it! Tim |
|
| Author: | mikavir [ Mon May 28, 2012 12:49 pm ] |
| Post subject: | Re: Monitorix not working after upgrade to 7.1 - Resolved |
This was great help, thank you tscholl! I was able to get this to work also, with a minor correction: The latter copy should be /srv/http/cgi-bin (not /srv/http/monitorix/cgi-bin) to /data/srv/httpd/htdocs/cgi-bin |
|
| Author: | tscholl [ Mon May 28, 2012 3:12 pm ] |
| Post subject: | Re: Monitorix not working after upgrade to 7.1 - Resolved |
Glad it worked for you as well. I updated my post to reflect your findings. I also made one additional change in regards to the index.html It does gets updated now and then and when it does the copy at /data/srv/httpd/htdocs/monitorix/index.html is out of sync. To eliminate that problem I deleted the index.html from /data/srv/httpd/htdocs/monitorix and created a link back to /srv/http/monitorix/index.html Code: cd /data/srv/httpd/htdocs/monitorix/ rm index.html ln -s /srv/http/monitorix/index.html index.html It would really probably be a lot cleaner just to link /data/srv/httpd/htdocs/monitorix to /srv/http/monitorix/ and that would eliminate the need to do the index.html link. |
|
| Author: | mikavir [ Wed May 30, 2012 9:19 am ] |
| Post subject: | Re: Monitorix not working after upgrade to 7.1 - Resolved |
All things happen @ (too) late hours
|
|
| Author: | tscholl [ Fri Jun 01, 2012 10:58 am ] |
| Post subject: | Re: Monitorix not working after upgrade to 7.1 - Resolved |
Updated instructions Code: copy /srv/http/cgi-bin/monitorix.cgi to /data/srv/httpd/htdocs/cgi-bin/ cd /data/srv/httpd/htdocs/ ln -s /srv/http/monitorix monitorix That's it! |
|
| Page 1 of 2 | All times are UTC - 6 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|