Author |
Message |
cahlfors
|
Posted: Sat Mar 16, 2013 4:00 am |
|
Joined: Tue Jan 23, 2007 1:38 pm
Posts: 249
Location:
Sweden
|
Hello everyone! I got stuck again trying to upgrade to R8. I ran into difficulties and tried to solve them by removing all the receivers and transports in setup, rebooting and adding them again. Now I get an error_open on all of them and can't find a way to fix that. Code: cat dmesg.log | grep dvb [ 5.601313] dvb-usb: found a 'Hauppauge Nova-TD Stick (52009)' in warm state. [ 5.601385] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 6.013068] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 6.369837] dvb-usb: Hauppauge Nova-TD Stick (52009) successfully initialized and connected. [ 6.370199] dvb-usb: found a 'Hauppauge Nova-T Stick' in warm state. [ 6.370282] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 6.783086] dvb-usb: Hauppauge Nova-T Stick successfully initialized and connected. [ 6.786033] dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in warm state. [ 6.786119] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 7.439250] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 7.980991] dvb-usb: Hauppauge Nova-T 500 Dual DVB-T successfully initialized and connected. [ 7.986296] usbcore: registered new interface driver dvb_usb_dib0700
Looks okay to me? Searching the net turns up others with the same issue and the general advice seems to be that something is using the cards, but I can't find anything? Ideas anyone? Thanks, /Chris
_________________ LinHES R8.6.1 BE: AMD64X4, 4GB, Hauppauge usb tuners FE1: Gigabyte F2A85X-UP4, nVidia GT640 FE2: Gigabyte GA-MA69GM-S2H, AthlonX2 4850E 2.5 GHz, 1GB, ASUS GEFORCE 7200GS 256MB FE3: Asus Eeebox410
|
|
Top |
|
|
hartsu
|
Posted: Sun Mar 31, 2013 11:21 am |
|
Joined: Tue Apr 18, 2006 3:10 pm
Posts: 24
Location:
Finland SW
|
cahlfors wrote: Ideas anyone? /Chris
No, but when i try install R8 i have same problem my both tuners. Hauppauge Nova-T 500 and Technotrend TT-Budget C-1501 PCI cards. Harri
|
|
Top |
|
|
tophee
|
Posted: Mon Apr 01, 2013 5:38 am |
|
Joined: Tue Sep 13, 2005 10:48 am
Posts: 852
Location:
London, UK
|
Hi, I thin I'm seeing the same / similar issues with my nova-HD-S2 cards. When I try to use them to scan for channels, it takes an age to get to the relevant page, it then fails almost immediately.
_________________ Version:R8 Intel C2D 7400, Nvidia 5600 via HDMI to Samsung B37B650TW (PAL), Asus P5QL-E mobo, 4Gb PC6400 DDR2 ram, Samsung Spinpoint 500 Gb & 1Tb drive, Nova-HD-S2 (x2)
|
|
Top |
|
|
tophee
|
Posted: Mon Apr 01, 2013 1:11 pm |
|
Joined: Tue Sep 13, 2005 10:48 am
Posts: 852
Location:
London, UK
|
I've been looking back at my old notes - I had some difficulties with my Nova-HD-S2 cards in R7. Looking at the kernal log, I am seeing there is a problem with the firmware: it isn't there. As you can see here: (this was taken from my kernal log which is found in /var/log/mythtv/(today's date)/your_machines_name_kernal.log) 2013-04-01T20:35:25.500689+01:00 lust kernel: [ 382.330113] cx24116_firmware_ondemand: Waiting for firmware upload (dvb-fe-cx$ 2013-04-01T20:35:25.500706+01:00 lust kernel: [ 382.330475] cx24116_firmware_ondemand: Waiting for firmware upload(2)... 2013-04-01T20:35:25.500708+01:00 lust kernel: [ 382.330477] cx24116_firmware_ondemand: No firmware uploaded (timeout or file $ 2013-04-01T20:35:25.500709+01:00 lust kernel: [ 382.330479] cx24116_cmd_execute(): Unable initialise the firmware
This is exactly the problem I had in R7. I had a poke around in the /lib/firmware folder and there seems to be a lack of firmware included... perhaps some of the devs can have a look and push an updated package?
thanks
_________________ Version:R8 Intel C2D 7400, Nvidia 5600 via HDMI to Samsung B37B650TW (PAL), Asus P5QL-E mobo, 4Gb PC6400 DDR2 ram, Samsung Spinpoint 500 Gb & 1Tb drive, Nova-HD-S2 (x2)
|
|
Top |
|
|
tscholl
|
Posted: Tue Apr 02, 2013 2:04 pm |
|
Joined: Mon Apr 10, 2006 3:48 pm
Posts: 997
Location:
Lexington, Ky
|
|
Top |
|
|
cahlfors
|
Posted: Wed Apr 03, 2013 4:09 am |
|
Joined: Tue Jan 23, 2007 1:38 pm
Posts: 249
Location:
Sweden
|
No, it's not. Getting the T500 to work is a separate question. The issue in this thread affects all receivers.
_________________ LinHES R8.6.1 BE: AMD64X4, 4GB, Hauppauge usb tuners FE1: Gigabyte F2A85X-UP4, nVidia GT640 FE2: Gigabyte GA-MA69GM-S2H, AthlonX2 4850E 2.5 GHz, 1GB, ASUS GEFORCE 7200GS 256MB FE3: Asus Eeebox410
|
|
Top |
|
|
hartsu
|
Posted: Thu Aug 15, 2013 12:58 pm |
|
Joined: Tue Apr 18, 2006 3:10 pm
Posts: 24
Location:
Finland SW
|
Hej Chris,
Did you get this problem solved ? I'm on vacation now, and I thought to try the installation again.
Harri
|
|
Top |
|
|
cahlfors
|
Posted: Fri Aug 16, 2013 3:13 am |
|
Joined: Tue Jan 23, 2007 1:38 pm
Posts: 249
Location:
Sweden
|
No, they are still busy just about all of the time, but by restarting repeatedly, I managed to get enough time slot to access and do what I needed. I am NOT using over-the-air program guide on any channel (unless I've made a mistake...). The only remaining issue I'm having, is slightly stuttering video. First, I thought that would be attributable to the fact that I am now using new, usb-2 based receivers, but it affects the Nova T500 and a Nova PCI I moved over from the old system as well. It's not a playback issue - the actual recordings are affected. Live TV is stuttering far worse - to the point of being useless. All this in standard definition - I'm not on track with HD yet. I decided to move over to R8 despite these wrinkles, because the old P3 system (!) running R5.5 was getting db errors because of bad hard disk sectors. Scary! At least the old system was a tribute to the leanness of KnoppMyth and robustness of twelve year old IBM hardware (it wasn't their disk...)! After switching it off, I need to consider additional heating in the "server room" (aka "garage")... Cheers, /Chris
_________________ LinHES R8.6.1 BE: AMD64X4, 4GB, Hauppauge usb tuners FE1: Gigabyte F2A85X-UP4, nVidia GT640 FE2: Gigabyte GA-MA69GM-S2H, AthlonX2 4850E 2.5 GHz, 1GB, ASUS GEFORCE 7200GS 256MB FE3: Asus Eeebox410
|
|
Top |
|
|
hartsu
|
Posted: Fri Aug 16, 2013 6:48 am |
|
Joined: Tue Apr 18, 2006 3:10 pm
Posts: 24
Location:
Finland SW
|
Thanks, I got one of the tuner already installed so I have to continue until all of the three tuners have been found. So good luck and patience is needed during installation harri
|
|
Top |
|
|