LinHES Forums
http://forums.linhes.org/

error_open on all receivers
http://forums.linhes.org/viewtopic.php?f=22&t=23715		 Page 1 of 1
Author:  cahlfors [ Sat Mar 16, 2013 4:00 am ]
Post subject:  error_open on all receivers
Hello everyone!
I got stuck again trying to upgrade to R8. I ran into difficulties and tried to solve them by removing all the receivers and transports in setup, rebooting and adding them again. Now I get an error_open on all of them and can't find a way to fix that.
Code:
cat dmesg.log | grep dvb
[    5.601313] dvb-usb: found a 'Hauppauge Nova-TD Stick (52009)' in warm state.
[    5.601385] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[    6.013068] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[    6.369837] dvb-usb: Hauppauge Nova-TD Stick (52009) successfully initialized and connected.
[    6.370199] dvb-usb: found a 'Hauppauge Nova-T Stick' in warm state.
[    6.370282] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[    6.783086] dvb-usb: Hauppauge Nova-T Stick successfully initialized and connected.
[    6.786033] dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in warm state.
[    6.786119] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[    7.439250] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[    7.980991] dvb-usb: Hauppauge Nova-T 500 Dual DVB-T successfully initialized and connected.
[    7.986296] usbcore: registered new interface driver dvb_usb_dib0700

Looks okay to me?
Searching the net turns up others with the same issue and the general advice seems to be that something is using the cards, but I can't find anything?
Ideas anyone?

Thanks,
/Chris
Author:  hartsu [ Sun Mar 31, 2013 11:21 am ]
Post subject:  Re: error_open on all receivers
cahlfors wrote:

Ideas anyone?
/Chris


No, but when i try install R8 i have same problem my both tuners.
Hauppauge Nova-T 500 and Technotrend TT-Budget C-1501 PCI cards.

Harri
Author:  tophee [ Mon Apr 01, 2013 5:38 am ]
Post subject:  Re: error_open on all receivers
Hi, I thin I'm seeing the same / similar issues with my nova-HD-S2 cards. When I try to use them to scan for channels, it takes an age to get to the relevant page, it then fails almost immediately.
Author:  tophee [ Mon Apr 01, 2013 1:11 pm ]
Post subject:  Re: error_open on all receivers
I've been looking back at my old notes - I had some difficulties with my Nova-HD-S2 cards in R7. Looking at the kernal log, I am seeing there is a problem with the firmware: it isn't there.
As you can see here: (this was taken from my kernal log which is found in /var/log/mythtv/(today's date)/your_machines_name_kernal.log)
2013-04-01T20:35:25.500689+01:00 lust kernel: [ 382.330113] cx24116_firmware_ondemand: Waiting for firmware upload (dvb-fe-cx$
2013-04-01T20:35:25.500706+01:00 lust kernel: [ 382.330475] cx24116_firmware_ondemand: Waiting for firmware upload(2)...
2013-04-01T20:35:25.500708+01:00 lust kernel: [ 382.330477] cx24116_firmware_ondemand: No firmware uploaded (timeout or file $
2013-04-01T20:35:25.500709+01:00 lust kernel: [ 382.330479] cx24116_cmd_execute(): Unable initialise the firmware

This is exactly the problem I had in R7. I had a poke around in the /lib/firmware folder and there seems to be a lack of firmware included... perhaps some of the devs can have a look and push an updated package?

thanks
Author:  tscholl [ Tue Apr 02, 2013 2:04 pm ]
Post subject:  Re: error_open on all receivers
Looks like this is the same issue as:

viewtopic.php?f=23&t=23723
Author:  cahlfors [ Wed Apr 03, 2013 4:09 am ]
Post subject:  Re: error_open on all receivers
No, it's not. Getting the T500 to work is a separate question. The issue in this thread affects all receivers.
Author:  hartsu [ Thu Aug 15, 2013 12:58 pm ]
Post subject:  Re: error_open on all receivers
Hej Chris,

Did you get this problem solved ?
I'm on vacation now, and I thought to try the installation again.

Harri
Author:  cahlfors [ Fri Aug 16, 2013 3:13 am ]
Post subject:  Re: error_open on all receivers
No, they are still busy just about all of the time, but by restarting repeatedly, I managed to get enough time slot to access and do what I needed. :roll:
I am NOT using over-the-air program guide on any channel (unless I've made a mistake...).

The only remaining issue I'm having, is slightly stuttering video. First, I thought that would be attributable to the fact that I am now using new, usb-2 based receivers, but it affects the Nova T500 and a Nova PCI I moved over from the old system as well. It's not a playback issue - the actual recordings are affected. Live TV is stuttering far worse - to the point of being useless. All this in standard definition - I'm not on track with HD yet.

I decided to move over to R8 despite these wrinkles, because the old P3 system (!) running R5.5 was getting db errors because of bad hard disk sectors. Scary! :shock: At least the old system was a tribute to the leanness of KnoppMyth and robustness of twelve year old IBM hardware (it wasn't their disk...)! After switching it off, I need to consider additional heating in the "server room" (aka "garage")... :shock:

Cheers,
/Chris
Author:  hartsu [ Fri Aug 16, 2013 6:48 am ]
Post subject:  Re: error_open on all receivers
Thanks,

I got one of the tuner already installed so I have to continue until all of the three tuners have been found.
So good luck and patience is needed during installation :roll:

harri
Page 1 of 1 All times are UTC - 6 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/