View unanswered posts    View active topics

All times are UTC - 6 hours





Post new topic Reply to topic  [ 4 posts ] 
Print view Previous topic   Next topic  
Author Message
Search for:
PostPosted: Sun May 15, 2016 12:14 am 
Offline
Joined: Thu Apr 06, 2006 8:36 pm
Posts: 34
Location: Clio, MI
I just did an install of R8.4 on one of my older boxes to test before deployment to my master BE.


Code:
[root@greed ~]# add_storage.py --no_destruction
------------------------------------------------------------
  Scan for Disks


    --------------------------------------------------------
    Found New Disk:
        model: ST750LM022 HN-M750MBB
        location: /dev/sdb
        size: 750156374016

        ** Preserving existing contents on the disk. **
        This disk will NOT be partitioned or formatted.

        Enable this disk for storage (Y/N)?:y

    ST750LM022 HN-M750MBB will be added to your system!


    --------------------------------------------------------
    Ignoring - Disk has been previously skipped and is mounted:
        model: OCZ VERTEX PLUS
        location: /dev/sda
        size: 60022480896


    --------------------------------------------------------
    Found New Disk:
        model: ST3750528AS
        location: /dev/sdc
        size: 750156374016

        ** Preserving existing contents on the disk. **
        This disk will NOT be partitioned or formatted.

        Enable this disk for storage (Y/N)?:y

    ST3750528AS will be added to your system!


  Scan Finished
------------------------------------------------------------

  Will add 2 disk(s) to your system.
************************************************************

    MythTV Storage Groups are used for artwork, database backups,
    photos, music, streaming, TV recordings, and videos.

    The content on these storage groups will
    only be available while the system is online.

    Enabling MythTV Storage Groups will create the directories
    on the disk(s) and add the paths to the MythTV database.

    Enable MythTV Storage Groups (Y/N)?:y
    ** Will add MythTV Storage Groups!



   Ready to add additional storage!

   ** These disk(s) will NOT be partitioned and formatted. **
      ST750LM022HN-M750MBB_S2SUJ9AC408763
      ST3750528AS_9VPABLPA

   Press Y to add disk(s), any other key to cancel:y
-----
Traceback (most recent call last):
  File "/usr/LH/bin/add_storage.py", line 1124, in <module>
    main(scan_only, destruction, no_mount, install_call, dir_sg)
  File "/usr/LH/bin/add_storage.py", line 656, in main
    disk_num = last_disk_num()
  File "/usr/LH/bin/add_storage.py", line 554, in last_disk_num
    return num_list[-1]
IndexError: list index out of range


Just my luck......
Funny thing was this is the box (intel boxdg45fc mini-ITX) that I have not been able to install anything higher than R8.0 on with out it locking up at the end of the install, Previously posted topic Still un-solved.....

Well R8.4 installs using an nvidia video card, but not the onboard intel....

Any thoughts?

_________________
MBE: GIGABYTE H77-DS3H, i3 CPU, 4GB ram, 1 x 16gb SSD , 2x3TB WD-RED, HVR-2250, Nvidia Video
FE only: Asus H81T/CSM Thin mini-ITX, Intel G3250 3.2Ghz, 4 GB DDR3, 320GB HDD
FE only: intel boxdg45fc mini-ITX, DVI - HDMI, 4GB, 20G HDD, 2.83 GHZ


Last edited by kc8vfa on Sun May 22, 2016 10:23 pm, edited 1 time in total.


Top
 Profile  
 
PostPosted: Mon May 16, 2016 10:29 am 
Offline
Joined: Fri Jul 21, 2006 11:12 pm
Posts: 1017
Location: SC
For the add_storage.py error what is in /etc/storage.d


Top
 Profile  
 
PostPosted: Mon May 16, 2016 11:36 pm 
Offline
Joined: Thu Apr 06, 2006 8:36 pm
Posts: 34
Location: Clio, MI
sorry for the late reply..... had to find another HDD and reinstall 8.4 fresh.

Code:
[root@generosity ~]# ls /etc/storage.d/
readme  storage.pkl
[root@generosity ~]#



This is a fresh install with only the system drive installed. after I finish all the system wide configs then I shutdown and add the HDDS that I want to add/re-add if it is a fresh reinstall and importing old drives.

not related to the storage issue but I also have a quirk in the gallery view....independent of theme, fresh install or upgrade from r8.3:
I have 2 HDDS that I separate the movies and the TV shows on. the TV shows all seem to work correctly, I do not believe that the TV folder does it because all the TV shows are in folders by Network/series name/Seasons or Series/Season.
But the movies folder is giving some weird quirks. when browsing the list of videos and going to the bottom of the list on the left or the middle it jumps/skips to what would be the last row but you cannot scroll to the left or down, only right and up. then when you go up a few rows it jumps again then the up/down/left/right keys work as expected...until you get close to the bottom. I can shoot a vid because I don't believe I can explain it any better.


Thanks for the time.
dave

_________________
MBE: GIGABYTE H77-DS3H, i3 CPU, 4GB ram, 1 x 16gb SSD , 2x3TB WD-RED, HVR-2250, Nvidia Video
FE only: Asus H81T/CSM Thin mini-ITX, Intel G3250 3.2Ghz, 4 GB DDR3, 320GB HDD
FE only: intel boxdg45fc mini-ITX, DVI - HDMI, 4GB, 20G HDD, 2.83 GHZ


Top
 Profile  
 
PostPosted: Thu May 19, 2016 3:33 pm 
Offline
Joined: Fri Jul 21, 2006 11:12 pm
Posts: 1017
Location: SC
The add_storage.py issue has been fixed in R8.4.1. You will need to download the new ISO and reinstall.


Top
 Profile  
 

Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 


All times are UTC - 6 hours




Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group

Theme Created By ceyhansuyu