LinHES Forums http://forums.linhes.org/ |
|
(Solved) New I5 Kaby Lake cpu install http://forums.linhes.org/viewtopic.php?f=22&t=24621 |
Page 2 of 2 |
Author: | bgrant3406 [ Sat Apr 01, 2017 10:26 am ] |
Post subject: | Re: New I5 Kaby Lake cpu install |
So pointed my pacman.conf to the testing repos and did the upgrade. Rebooted, ran xconfig.sh and same Xorg.1.log as shown above, ultimately, the "(EE) No devices detected" detected line, but their is one difference: A new line before the (EE) No devices detected Code: intel: waited 2020 ms for i915.ko driver to load Other than that no changes in operation that I can see (but then again, do I really know where to look ) Does that indicate anything that I did incorrectly, or that I can fix? Thanks for all your hard work and the updates you have made to help me get this resolved! Bruce. |
Author: | brfransen [ Sat Apr 01, 2017 10:50 am ] |
Post subject: | Re: New I5 Kaby Lake cpu install |
i915 should be part of the kernel. Is it loading? Use lsmod to check. |
Author: | bgrant3406 [ Sat Apr 01, 2017 11:09 am ] |
Post subject: | Re: New I5 Kaby Lake cpu install |
When I do an: Code: lsmod |grep i915 it returns Code: i915 1175552 0 video 36864 1 i915 button 16384 1 i915 intel_gtt 20480 1 i915 i2c_algo_bit 16384 3 i915, cx88_vp3054_i2c, cx88xx drm_kms_helper 110592 1 i915 drm 299008 2 i915, drm_kms_helper if you need to see a full lsmod output, let me know. |
Author: | brfransen [ Sun Apr 02, 2017 8:42 am ] |
Post subject: | Re: New I5 Kaby Lake cpu install |
That looks as I would expect. Maybe it is down to the kernel but I think there are other distros that are still on the 4.4 series. If I get time this week I will build a newer kernel. |
Author: | bgrant3406 [ Sun Apr 02, 2017 9:20 am ] |
Post subject: | Re: New I5 Kaby Lake cpu install |
Thank you! I appreciate all you help! Bruce |
Author: | brfransen [ Thu Apr 06, 2017 3:17 pm ] |
Post subject: | Re: New I5 Kaby Lake cpu install |
I have built and pushed 4.9.20 to the testing repo. |
Author: | bgrant3406 [ Thu Apr 06, 2017 8:22 pm ] |
Post subject: | Re: New I5 Kaby Lake cpu install |
Thank you! I may be able to test tomorrow or this weekend, as soon as I have results I will report back! Bruce |
Author: | bgrant3406 [ Sat Apr 08, 2017 6:04 pm ] |
Post subject: | Re: (Solved) New I5 Kaby Lake cpu install |
Thank you, brfransen, you are a rock star! Changed to -testing and upgraded the system, did an xconfig.sh and rebooted. Intel graphics worked immediately! I was also able to use the hdmi audio for the first time as the settings could now see the card and I could setup audio. Dmesg was complaining that /etc/systemd/coredump.conf.d/coredump.conf was executable I did a chmod 444 and that stopped that. I still have the NFS issue, but I will open a separate issue on that one to see if you have any guidance on that. If/when you spin an ISO with the new kernel, I will be happy to test a new install and an upgrade to let you know if there are any issues with intel graphics, or does the install progress normally. I have that spare disk I have been using for testing. Thanks again for your support on this as well as all of the work you do to constantly improve LinHES, we are not vocal enough in praising your efforts! Bruce |
Author: | brfransen [ Mon Apr 10, 2017 7:54 am ] |
Post subject: | Re: (Solved) New I5 Kaby Lake cpu install |
Thanks for the kind words! Intel graphics have been difficult over the years. Partly because there are so many different variations. And I only have a very old Intel box with a GMA 4500 that has worked with LinHES for years. So did the boot splash (LinHES logo in blue) work? Did you change the xorg.conf AccelMethod to sna? My understanding is newer chipsets are faster with sna but sometimes have some issues. That is why we default to uxa. I just pushed a fix for the coredump permissions. Thanks, Britney |
Author: | bgrant3406 [ Mon Apr 10, 2017 12:29 pm ] |
Post subject: | Re: (Solved) New I5 Kaby Lake cpu install |
I didn't change xorg.conf, but will give it a shot and see what I see. Honestly didn't notice the boot screen, I was just so excited to see that the font didn't change at the point where the VESA driver would have loaded during system boot! As far as I recall it was a normal boot, but I will reboot the live system to see what I see and will report back. Bruce. |
Author: | bgrant3406 [ Mon Apr 10, 2017 4:39 pm ] |
Post subject: | Re: (Solved) New I5 Kaby Lake cpu install |
So rebooted with splash screen and it does show up and the dots change from blue to white until the larger LinHES backend connection screen shows up. On the shutdown side, the screen goes blank till the SIGKILL message is shown then the splash screen shows until shutdown/reboot. I've changed the xorg.conf AccelMethod to sna, so we shall see if that changes anything. Anything else you would like me to check, let me know. Bruce |
Page 2 of 2 | All times are UTC - 6 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |