View unanswered posts    View active topics

All times are UTC - 6 hours





Post new topic Reply to topic  [ 4 posts ] 
Print view Previous topic   Next topic  
Author Message
Search for:
PostPosted: Wed Sep 18, 2019 9:27 pm 
Offline
Joined: Mon Apr 10, 2006 3:48 pm
Posts: 978
Location: Lexington, Ky
I just rebuilt and restored data to a new drive and have everything working except the blaster in my hdpvr.

When I use to load lirc_zilog I use to get the following in dmesg log
Code:
[   40.234796] lirc_zilog: module is from the staging directory, the quality is unknown, you have been warned.
[   40.235044] lirc_zilog: Zilog/Hauppauge IR driver initializing
[   40.238614] lirc_zilog: probing IR Rx on Hauppage HD PVR I2C (i2c-2)
[   40.238650] lirc_zilog: probe of IR Rx on Hauppage HD PVR I2C (i2c-2) done. Waiting on IR Tx.
[   40.238652] lirc_zilog: probe of IR Rx on Hauppage HD PVR I2C (i2c-2) done
[   40.238660] lirc_zilog: probing IR Tx on Hauppage HD PVR I2C (i2c-2)
[   40.299744] i2c i2c-2: lirc_dev: driver lirc_zilog registered at minor = 1
[   40.299748] lirc_zilog: IR unit on Hauppage HD PVR I2C (i2c-2) registered as lirc1 and ready
[   40.299751] lirc_zilog: probe of IR Tx on Hauppage HD PVR I2C (i2c-2) done
[   40.299777] lirc_zilog: initialization complete


Now the only thing dmesg reports is
Code:
[    6.609369] lirc_zilog: module is from the staging directory, the quality is unknown, you have been warned.
[    6.610135] lirc_zilog: module is from the staging directory, the quality is unknown, you have been warned.
[    6.628313] i2c i2c-5: lirc_dev: driver lirc_zilog registered at minor = 0

I need to know what the IR unit on Hauppage HD PVR I2C (i2c-2) registered as lircx

What am I missing?


Last edited by tscholl on Fri Sep 20, 2019 12:20 pm, edited 1 time in total.


Top
 Profile  
 
PostPosted: Fri Sep 20, 2019 12:19 pm 
Offline
Joined: Mon Apr 10, 2006 3:48 pm
Posts: 978
Location: Lexington, Ky
Ok after another good nights sleep I dug a little deeper into the the dmesg log.
Seems that just using dmesg | grep lirc_zilog I wasn't giving me all the message. Finally looked at the used dmesg | more and found what I was missing.
Code:
[    6.598330] hdpvr 6-2:1.0: device now attached to video0
[    6.598378] usbcore: registered new interface driver hdpvr
[    6.673252] lirc_dev: IR Remote Control driver registered, major 245
[    6.714513] lirc_zilog: module is from the staging directory, the quality is
unknown, you have been warned.
[    6.715226] Zilog/Hauppauge IR driver initializing
[    6.718566] lirc_zilog: module is from the staging directory, the quality is
unknown, you have been warned.
[    6.720876] probing IR Rx on Hauppage HD PVR I2C (i2c-5)
[    6.721058] probe of IR Rx on Hauppage HD PVR I2C (i2c-5) done. Waiting on IR
 Tx.
[    6.721069] i2c i2c-5: probe of IR Rx on Hauppage HD PVR I2C (i2c-5) done
[    6.721122] probing IR Tx on Hauppage HD PVR I2C (i2c-5)
[    6.797642] i2c i2c-5: lirc_dev: driver lirc_zilog registered at minor = 0
[    6.797649] i2c i2c-5: IR unit on Hauppage HD PVR I2C (i2c-5) registered as l
irc0 and ready
[    6.797655] i2c i2c-5: probe of IR Tx on Hauppage HD PVR I2C (i2c-5) done
[    6.797710] initialization complete

Still not quite sure what fixed it but the last thing I did was to create a
/etc/lirc/hardware.conf file
Code:
    #Chosen IR transmitter
    TRANSMITTER="HD-PVR"
    TRANSMITTER_MODULES="lirc_dev lirc_zilog"
    TRANSMITTER_DRIVER=""
    TRANSMITTER_DEVICE="/dev/lirc0"
    TRANSMITTER_SOCKET=""
    TRANSMITTER_LIRCD_CONF=""
    TRANSMITTER_LIRCD_ARGS=""

After that I restarted lirc and things worked. I did a few other things as well will try to figure out exactly what fixed it when I have some more time.


Top
 Profile  
 
PostPosted: Fri Sep 20, 2019 11:17 pm 
Offline
Joined: Tue Aug 15, 2006 11:14 am
Posts: 1300
Location: Orlando FL
Glad to hear you got it magically fixed. Sometimes I'd rather be lucky than good.

_________________
My System


Top
 Profile  
 
PostPosted: Sun Sep 22, 2019 10:10 pm 
Offline
Joined: Mon Apr 10, 2006 3:48 pm
Posts: 978
Location: Lexington, Ky
Lucky does help that's for sure. :D


Top
 Profile  
 

Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 


All times are UTC - 6 hours




Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group

Theme Created By ceyhansuyu