View unanswered posts    View active topics

All times are UTC - 6 hours





Post new topic Reply to topic  [ 3 posts ] 
Print view Previous topic   Next topic  
Author Message
Search for:
PostPosted: Tue Nov 10, 2009 8:04 pm 
Offline
Joined: Wed Aug 03, 2005 8:43 am
Posts: 66
Hi Guys,

I think it has been years since had to ask a question. But here goes.
My hd crashed a day ago and i decided to upgrade my mythtv box. I installed linhes 6.1 and am very impressed. Sound vid remote all worked out of the box.

I went to the linhes config and remote and turned on serial blaster picked tts3 and found my exact sat box.

[root@mythtv-server ~]# dmesg | grep lirc
lirc_dev: IR Remote Control driver registered, major 61
lirc_mod_mce: Input driver for Microsoft MCE 2005 keyboard v0.1.5
lirc_mod_mce: Florian Demski
lirc_dev: lirc_register_plugin: sample_rate: 0
lirc_mod_mce[2]: SMK eHome Infrared Transceiver on usb2:2
usbcore: registered new interface driver lirc_mod_mce
lirc_serial: auto-detected active low receiver
lirc_dev: lirc_register_plugin: sample_rate: 0
[root@mythtv-server ~]#

now in the old r5f27 i would go to my change-chan.sh file in etc and verify it had the proper set top codes. But what do i do next in r6.1?

I didn't add the change channel to mythtv setup yet as i don't know what one to add. I found two configured ones in usr/MythVantage/templates. But both have the wrong remote info so i assume they are not created by the mythtv gui.


Top
 Profile  
 
 Post subject:
PostPosted: Tue Dec 08, 2009 7:20 am 
Offline
Joined: Mon Jan 30, 2006 6:57 pm
Posts: 90
Check /usr/bin and see if there is a change_chan.sh there with the correct info.


Top
 Profile  
 
PostPosted: Mon Apr 12, 2010 10:50 pm 
Offline
Joined: Mon Aug 14, 2006 11:49 am
Posts: 26
I've been studying the forums but I can't get a new R6.02 installation to use irblaster with a serial IR to change channels on my Dish receiver.

My old KnoppMyth setup used a change_channel.sh script, which I can't find anywhere. Even before that I can't lircd to run. The commands are run intermixed with a tail -f of /var/log/lircd

Code:
[root@mythbe bin]# /etc/rc.d/lircd restart
:: Stopping LIRC Daemon                                                  [DONE]
Apr 12 23:48:35 mythbe lircd: caught signal
:: Starting LIRC Daemon                                                  [DONE]
[root@mythbe bin]# Apr 12 23:48:36 mythbe lircd: lircd(default) ready

[root@mythbe bin]# /usr/bin/irsend --device=/dev/lircd SEND_ONCE 301 5
irsend: command failed: SEND_ONCE 301 5
irsend: hardware does not support sending
[root@mythbe bin]# Apr 12 23:49:20 mythbe lircd: accepted new client on /dev/lircd
Apr 12 23:49:20 mythbe lircd: could not get hardware features
Apr 12 23:49:20 mythbe lircd: this device driver does not support the new LIRC interface
Apr 12 23:49:20 mythbe lircd: major number of /dev/ttyS1 is 4
Apr 12 23:49:20 mythbe lircd: LIRC major number is 61
Apr 12 23:49:20 mythbe lircd: check if /dev/ttyS1 is a LIRC device
Apr 12 23:49:20 mythbe lircd: WARNING: Failed to initialize hardware
Apr 12 23:49:20 mythbe lircd: error processing command: SEND_ONCE 301 5
Apr 12 23:49:20 mythbe lircd: hardware does not support sending
Apr 12 23:49:20 mythbe lircd: removed client


How do I get this to work?


Top
 Profile  
 

Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 


All times are UTC - 6 hours




Who is online

Users browsing this forum: No registered users and 7 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group

Theme Created By ceyhansuyu