View unanswered posts    View active topics

All times are UTC - 6 hours





Post new topic Reply to topic  [ 1 post ] 
Print view Previous topic   Next topic  
Author Message
Search for:
PostPosted: Sun Jan 10, 2010 2:45 pm 
Offline
Joined: Sun Nov 20, 2005 10:07 pm
Posts: 116
EDIT: This is well covered elsewhere as just being a UDEV problem on init with various methods to fix. So I'm going to close this topic out rather than delete it.


Occassionally, when MythTV starts up, my PVR-350 doesn't init.

So I have to reboot until it does. Although this morning it seems pretty stubborn not to want to start...

DMESG says:

Code:
ivtv:  Start initialization, version 1.4.0
ivtv0: Initializing card #0
ivtv0: Autodetected Hauppauge card (cx23415 based)
ivtv 0000:02:04.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
tveeprom 2-0050: Hauppauge model 48132, rev K268, serial# 2927118
tveeprom 2-0050: tuner model is LG TAPE H001F MK3 (idx 68, type 47)
tveeprom 2-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 2-0050: audio processor is MSP4448 (idx 27)
tveeprom 2-0050: decoder processor is SAA7115 (idx 19)
tveeprom 2-0050: has radio, has IR receiver, has no IR transmitter
ivtv0: Autodetected Hauppauge WinTV PVR-350
nvidia: module license 'NVIDIA' taints kernel.
PPP generic driver version 2.4.2
cx88/0: cx2388x v4l2 driver version 0.0.6 loaded
ppdev: user-space parallel port driver
saa7115 2-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0)
saa7127 2-0044: saa7129 found @ 0x88 (ivtv i2c driver #0)
msp3400 2-0040: MSP4448G-A2 found @ 0x80 (ivtv i2c driver #0)
msp3400 2-0040: msp3400 supports radio, mode is autodetect and autoselect
tuner 2-0043: chip found @ 0x86 (ivtv i2c driver #0)
tda9887 2-0043: creating new instance
tda9887 2-0043: tda988[5/6/7] found
tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0)
tuner-simple 2-0061: creating new instance
tuner-simple 2-0061: type set to 47 (LG NTSC (TAPE series))
ivtv0: Registered device video0 for encoder MPG (4096 kB)
ivtv0: Registered device video32 for encoder YUV (2048 kB)
ivtv0: Registered device vbi0 for encoder VBI (1024 kB)
ivtv0: Registered device video24 for encoder PCM (320 kB)
ivtv0: Registered device radio0 for encoder radio
ivtv0: Registered device video16 for decoder MPG (1024 kB)
ivtv0: Registered device vbi8 for decoder VBI (64 kB)
ivtv0: Registered device vbi16 for decoder VOUT
ivtv0: Registered device video48 for decoder YUV (1024 kB)
ivtv0: Initialized card #0: Hauppauge WinTV PVR-350
cx8800 0000:02:06.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
cx88[0]/0: found at 0000:02:06.0, rev: 5, irq: 22, latency: 32, mmio: 0xf4000000
cx88[0]/0: registered device video1 [v4l2]
cx88[0]/0: registered device vbi1
cx88[0]/0: registered device radio1
ivtv:  End initialization


I noticed that it might have something to do with when I set up the card.. it was pointing to /dev/video1 which was the PVR-350, and then on reboot, it seems it's now /dev/video0.. which when I change it - fixes the problem.

So possibly I need to tell the drivers on startup to assign cardX with /dev/videoX and not let them possibly switch.

Hmmmm...

-Ben


Top
 Profile  
 

Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 1 post ] 


All times are UTC - 6 hours




Who is online

Users browsing this forum: No registered users and 17 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group

Theme Created By ceyhansuyu