LinHES Forums http://forums.linhes.org/ |
|
WinTV HVR 1110 http://forums.linhes.org/viewtopic.php?f=23&t=21275 |
Page 1 of 1 |
Author: | Zith [ Wed Aug 11, 2010 2:42 pm ] |
Post subject: | WinTV HVR 1110 |
Hi. I have very little experience in Linux and LinHes and I'm having some difficulty finding relevant information in the ample documentation available. I've got a WinTV HVR 1110 tuner and LinHes R6.03 and I need to know how to make these work together. It seems like only the analog tuner shows up in MythTv. Any ideas? |
Author: | mattbatt [ Thu Aug 12, 2010 9:39 pm ] |
Post subject: | |
Quick google search I found this http://linuxtv.org/wiki/index.php/Haupp ... V-HVR-1110 and this http://wiki.linuxmce.org/index.php/Haup ... V-HVR-1110 Looks like the analog tuner already has the drivers baked into V4L but to get the digital side you are going to need to get your geek on and climb into the terminal a little. |
Author: | Zith [ Fri Aug 13, 2010 2:40 am ] |
Post subject: | |
Thanks, Mattbatt! I've tried the stuff in the first link, but "modprobr saa7134-dvb" doesn't return anything and doesn't seem to create a /dev/dvb folder either. I¨ll give the linuxmce link a try and see how that goes... |
Author: | Zith [ Fri Aug 13, 2010 12:33 pm ] |
Post subject: | |
Well, that didn't do much better either. Quote: Kernel Configuration
This only needs to be done once (but it doesn't hurt to do more times): create a config file to tell the kernel driver which card it actually is remove any existing instances of saa7134_dvb from the modules list add saa7134_dvb (again) to the list of modules to start at boot-time restart the system In other words: sudo echo 'options saa7134 card=104' >/etc/modprobe.d/saa7134 sudo sed -e '/^[^#]*saa7134_dvb/d' -i /etc/modules sudo echo 'saa7134_dvb' >>/etc/modules sudo reboot It fails on the second row (sudo sed), since /etc/modules doesn't exist at all. It feels like I need to do something *before* all the similar instructions and 'how-tos' I've found so far. Basically, all I've done is make a bootable USB-stick with the Linhes R6.03 cd image using 'unetbootin'. This boots up nicely and teh Linhes installation goes of without any hiccups. Then in mythtv I do the General setup, and then the Tuner setup, where only the analog Tuner is listed under v4l. Nothing strange there....or? Does it matter if I don't have te antenna connected to the tuner during installation? |
Author: | Zith [ Fri Aug 13, 2010 12:40 pm ] |
Post subject: | |
Does this matter: "The WinTV-HVR-1120 needs kernel 2.6.31 as a minimum." The current kernel seems to be 2.6.28. I'm not sure on how to discern a 1110 card from the 1120, any ideas on that? |
Author: | cecil [ Sat Aug 14, 2010 7:21 pm ] |
Post subject: | |
Code: sudo pacman -Syf v4l-dvb reboot and try again.
|
Page 1 of 1 | All times are UTC - 6 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |