LinHES Forums http://forums.linhes.org/ |
|
Getting Nova-T 500 card to work? [SOLVED] http://forums.linhes.org/viewtopic.php?f=23&t=23723 |
Page 1 of 1 |
Author: | cahlfors [ Sat Mar 30, 2013 5:26 am ] |
Post subject: | Getting Nova-T 500 card to work? [SOLVED] |
Trying to get an old Nova-T 500 card to work with R8. From LinuxTVWiki: Quote: You may have to force LNA to get this card working: In /etc/modprobe.d/options add: options dvb_usb_dib0700 force_lna_activation=1 Now, there is no such file. Creating it does not seem to help either - the signal strength is always 0% on this card. Should I just put it in the garbage, or could it be made to work with reasonable effort? Thanks, /Chris |
Author: | tophee [ Mon Apr 01, 2013 9:44 am ] |
Post subject: | Re: Getting Nova-T 500 card to work? |
It's a bit odd it doesn't work. In R7 it worked out of the box with no tweaking. I only took mine out of my setup as due to udev rules (and my lack of time/understanding) it kept swapping places with my other tuners. |
Author: | tophee [ Mon Apr 01, 2013 12:52 pm ] |
Post subject: | Re: Getting Nova-T 500 card to work? |
I've just been poking around my R8 box, and in /lib/firmware certainly the needed firmware for my card appears to be missing... perhaps it is the same with yours... |
Author: | tophee [ Thu Apr 11, 2013 6:52 am ] |
Post subject: | Re: Getting Nova-T 500 card to work? |
Hi calfors, Did you get your Nova-T500 working? I just put my old Nova-T500 into a friends machine. It worked out of the box, however when selecting the card in Myth-setup I chose the 'auto-detected' entry. I used EIT and away it went... picked up all channels first time. laters Chris |
Author: | cahlfors [ Fri Apr 12, 2013 9:14 am ] |
Post subject: | Re: Getting Nova-T 500 card to work? |
Thanks for the feedback, Chris! Then its worth some elbow grease to dig into this. Will try this weekend. /The other Chris |
Author: | cahlfors [ Sat Apr 13, 2013 7:09 am ] |
Post subject: | Re: Getting Nova-T 500 card to work? |
What an embarrassment! In the general situation of migrating from one box to another, I have more receivers than the antenna splitter can provide inputs for, so I have had to use any antenna connection available. In this case, I used the antenna output from a TV card that had one. It turned out, however, that the output was dead! When connecting the card to a working antenna, it worked without configuration... Thanks, /Chris |
Author: | tophee [ Sat Apr 13, 2013 9:24 am ] |
Post subject: | Re: Getting Nova-T 500 card to work? |
Sounds like something I'd do.... |
Page 1 of 1 | All times are UTC - 6 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |