View unanswered posts    View active topics

All times are UTC - 6 hours





Post new topic Reply to topic  [ 1 post ] 
Print view Previous topic   Next topic  
Author Message
Search for:
PostPosted: Wed Jan 21, 2015 12:12 pm 
Offline
Joined: Sun Mar 30, 2014 7:28 am
Posts: 17
Location: Germany, Berlin
Hi,
I find a solution for my old satellite PCI DVB-S card with chipset SAA7146 on a system with LinHES 8.2 plus updates (mythtv 0.27.4-3, LinHES-system 8.2-5).
(My dual port DVB-S2 card " Micronas Semiconductor Holding AG nGene PCI-Express Multimedia Controller (rev 01)" have no problem with standard installation of LinHES 8.2)

The problem is, that this card is not showing as a DVB-S satellite card, the following error message:
dmesg |grep -i dvb
Code:
 Linux video capture interface: v2.00
cx88/2: cx2388x dvb driver version 0.0.9 loaded
 cx88/2: registering cx8802 driver, type: dvb access: shared


To fix this you must edit the file
/etc/modprobe.d/alsa-base.conf and put a "#" in the line "options cx88_alsa index=-2" and reboot your system.
Code:
# Prevent abnormal drivers from grabbing index 0
options bt87x index=-2
#options cx88_alsa index=-2
options saa7134-alsa index=-2
options snd-atiixp-modem index=-2
options snd-intel8x0m index=-2
options snd-via82xx-modem index=-2
options snd-usb-audio index=-2
options snd-usb-usx2y index=-2
options snd-usb-caiaq index=-2


Regards Lutz

This is for information only:
**********************************************************************************************
I have a old "TechnoTrend TT Budget S-1500 PCI" DVB-S satellite card.
I) This is the error without the changes in /etc/modprobe.d/alsa-base.conf
1) "lspci -vv" show
Code:
01:05.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
        Subsystem: Technotrend Systemtechnik GmbH Device 1017
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 32 (3750ns min, 9500ns max)
        Interrupt: pin A routed to IRQ 15
        Region 0: Memory at fea01000 (32-bit, non-prefetchable) [size=512]

2) dmesg |grep -i dvb
Code:
 Linux video capture interface: v2.00
cx88/2: cx2388x dvb driver version 0.0.9 loaded
 cx88/2: registering cx8802 driver, type: dvb access: shared

3) You have no device in /dev/dvb/

II) After the changing the /etc/modprobe.d/alsa-base.conf and reboot the system you can see
1) lspci -vvv
Code:
01:05.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
        Subsystem: Technotrend Systemtechnik GmbH Device 1017
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 32 (3750ns min, 9500ns max)
        Interrupt: pin A routed to IRQ 20
        Region 0: Memory at fea00000 (32-bit, non-prefetchable) [size=512]
        Kernel driver in use: budget_ci dvb
        Kernel modules: budget_ci

2) dmesg |grep -i dvb
Code:
saa7146: register extension 'budget_ci dvb'
DVB: registering new adapter (TT-Budget/S-1500 PCI)
input: Budget-CI dvb ir receiver saa7146 (0) as /devices/pci0000:00/0000:00:14.4/0000:01:05.0/rc/rc0/input4
rc0: Budget-CI dvb ir receiver saa7146 (0) as /devices/pci0000:00/0000:00:14.4/0000:01:05.0/rc/rc0
budget_ci dvb 0000:01:05.0: DVB: registering adapter 0 frontend 0 (ST STV0299 DVB-S)...

3) ls -l /dev/dvb/adapter0:
Code:
crw-rw---- 1 root video 212, 4 Jan 21 14:16 demux0
crw-rw---- 1 root video 212, 5 Jan 21 14:16 dvr0
crw-rw---- 1 root video 212, 3 Jan 21 14:16 frontend0
crw-rw---- 1 root video 212, 7 Jan 21 14:16 net0


Top
 Profile  
 

Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 1 post ] 


All times are UTC - 6 hours




Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group

Theme Created By ceyhansuyu