LinHES Forums
http://forums.linhes.org/

LinHes 8.4.1 / HD-PVR i2c issue
http://forums.linhes.org/viewtopic.php?f=23&t=24560		 Page 1 of 1
Author:  bobmyth [ Mon Sep 26, 2016 9:01 pm ]
Post subject:  LinHes 8.4.1 / HD-PVR i2c issue
Short story: if I reboot my MBE/FE combo system the HD-PVR and I start recording, the recording will last for about 30 to 45 seconds and fail.
Code:
Sep 24 09:45:38 mythtv kernel: [  382.084789] i2c i2c-4: polling the IR receiver
 chip failed, trying reset
Sep 24 09:45:39 mythtv kernel: [  383.184941] i2c i2c-4: i2c_master_send failed
with -110
Sep 24 09:45:39 mythtv kernel: [  383.184947] i2c i2c-4: polling the IR receiver
 chip failed, trying reset
Sep 24 09:45:40 mythtv kernel: [  384.285147] i2c i2c-4: i2c_master_send failed
with -110
Sep 24 09:45:40 mythtv kernel: [  384.285153] i2c i2c-4: polling the IR receiver
 chip failed, trying reset
Sep 24 09:45:41 mythtv kernel: [  385.385313] i2c i2c-4: i2c_master_send failed
with -110
Sep 24 09:45:41 mythtv kernel: [  385.385319] i2c i2c-4: unable to read from the
 IR chip after 3 resets, giving up
Sep 24 09:45:43 mythtv kernel: [  386.645460] i2c i2c-4: i2c_master_send failed
with -110
Sep 24 09:45:43 mythtv kernel: [  386.645461] i2c i2c-4: polling the IR receiver
 chip failed, trying reset
Sep 24 09:45:43 mythtv kernel: [  387.745650] i2c i2c-4: i2c_master_send failed
with -110
Sep 24 09:45:43 mythtv kernel: [  387.746857] i2c i2c-4: polling the IR receiver
 chip failed, trying reset


I do *not* use the IR receiver on the HD-PVR.

However, if I follow this sequence:
  • Power off the HD-PVR (and leave it off)
  • Reboot the MBE/FE
  • Wait for the frontend to appear
  • Power on the HD-PVR
  • Restart the backend

I could not find a way to disable the IR receiver on the HD-PVR.

Anyone else seeing this? Do I have a problem with my system?
Page 1 of 1 All times are UTC - 6 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/