LinHES Forums http://forums.linhes.org/ |
|
Router Advertisement from ... http://forums.linhes.org/viewtopic.php?f=24&t=24366 |
Page 1 of 1 |
Author: | thekingofspain [ Tue Jun 14, 2016 9:26 pm ] |
Post subject: | Router Advertisement from ... |
Are you message logs filled with similar entries every 5 seconds? Code: dhcpcd[813]: eth0: Router Advertisement from fe80::7a54:2eff:fe4a:234 Turn these off by adding the following to line to the end of your /etc/dhcpcd.conf Code: noarp See https://wiki.archlinux.org/index.php/dh ... RP_probing for more info |
Author: | nicom [ Thu Jul 06, 2017 12:16 am ] |
Post subject: | Re: Router Advertisement from ... |
Sorry to drag out an old post but I get the Router Advertisement about every 20 seconds. I have tried adding noarp to /etc/dhcpcd.conf but it had no effect. Here is the contents of my /etc/dhcpcd.conf Code: $ cat /etc/dhcpcd.conf Am I missing something?
# A sample configuration for dhcpcd. # See dhcpcd.conf(5) for details. # Allow users of this group to interact with dhcpcd via the control socket. #controlgroup wheel # Inform the DHCP server of our hostname for DDNS. hostname # Use the hardware address of the interface for the Client ID. #clientid # or # Use the same DUID + IAID as set in DHCPv6 for DHCPv4 ClientID as per RFC4361. # Some non-RFC compliant DHCP servers do not reply with this set. # In this case, comment out duid and enable clientid above. duid # Persist interface configuration when dhcpcd exits. persistent # Rapid commit support. # Safe to enable by default because it requires the equivalent option set # on the server to actually work. option rapid_commit # A list of options to request from the DHCP server. option domain_name_servers, domain_name, domain_search, host_name option classless_static_routes # Most distributions have NTP support. option ntp_servers # Respect the network MTU. # Some interface drivers reset when changing the MTU so disabled by default. #option interface_mtu # A ServerID is required by RFC2131. require dhcp_server_identifier # Generate Stable Private IPv6 Addresses instead of hardware based ones slaac private # A hook script is provided to lookup the hostname if not set by the DHCP # server, but it should not be run by default. nohook lookup-hostname noipv4ll noarp |
Author: | thekingofspain [ Sat Sep 16, 2017 1:45 pm ] |
Post subject: | Re: Router Advertisement from ... |
try the following instead Code: noipv6rs
|
Author: | nicom [ Sun Sep 17, 2017 1:32 am ] |
Post subject: | Re: Router Advertisement from ... |
Thanks thekingofspain. That seems to have stopped it although I will keep monitoring it over the next couple of days. |
Page 1 of 1 | All times are UTC - 6 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |