View unanswered posts    View active topics

All times are UTC - 6 hours





Post new topic Reply to topic  [ 7 posts ] 
Print view Previous topic   Next topic  
Author Message
Search for:
PostPosted: Sun Jan 16, 2011 6:36 pm 
Offline
Joined: Wed Jun 10, 2009 8:39 pm
Posts: 118
Because I need to connect a wireless transmitter to outdoor speakers to stream Mythmusic, I have changed from OSS to Alsa over hdmi. That part is working fine in R6.

However, I am unable to get any output by connecting the transmitter to either a usb plug or via the green output jack of my inbuilt audio.

The transmitter can accept input from either usb or 3.5mm audio jack (eg mp3 player)

aplay -l shows the transmitter is card 1 device 0

Code:
# aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: NVidia [HDA NVidia], device 0: ALC1200 Analog [ALC1200 Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 1: ALC1200 Digital [ALC1200 Digital]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 3: NVIDIA HDMI [NVIDIA HDMI]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: Audio [SYNIC Wireless Audio], device 0: USB Audio [USB Audio]
  Subdevices: 1/1
  Subdevice #0: subdevice #0


My asound.conf is
Code:
 pcm.!default {
       type hw
       card 0
       device 3
   }


I have checked alsamixer and there is no relevant device muted.

Suggestions welcome, including what should be the bleeding obvious. :)

_________________
* Asus M3N78-EM, AMD 5050e, Nvidia 8300 IGP, QNAP TS-439 Pro II, Linhes 7.4


Top
 Profile  
 
 Post subject:
PostPosted: Mon Jan 17, 2011 9:43 am 
Offline
Joined: Wed Jan 04, 2006 10:20 am
Posts: 387
Location: South New Jersey, USA
Does Mythmusic currently play over the HDMI output?

What is your Audio device for mythmusic set to?

Check the setting in:
Service Menu / Mythtv Configuaration / Music Tools / Music Settings / General Settings

I think to send mythmusic to the usb transmitter the setting needs to be:

ALSA:hw:1,0

_________________
LINHES 8.6.1 BE/FE - MSI K9N6SGM-V with AMD A64 X2 4600+, 4GB Ram. 1.5TB WD. HDHR Prime. Nvidia GT210. MCE remote.
FrontEnd - Dell Vostro 400 3.0GHz Core2Duo NVidia GeForce210. MCE Remote


Top
 Profile  
 
 Post subject: Alsa to usb
PostPosted: Mon Jan 17, 2011 4:59 pm 
Offline
Joined: Wed Jun 10, 2009 8:39 pm
Posts: 118
Big boy stan wrote:
I think to send mythmusic to the usb transmitter the setting needs to be:

ALSA:hw:1,0


You da man! Works great. :D I changed the settings you suggested and now I receive the music to the usb transmitter (but no longer through the TV over hdmi).

Would it be greedy to ask if it is possible to simultaneously send the music to both the TV over hdmi and to the usb speakers?

In other words is it possible to tell ALSA to send the signal to both "hw 0,3" and to "hw 1,0"?

If that is too complex, it is okay. The main thing was to get music to the usb transmitter which now works. Many thanks.

_________________
* Asus M3N78-EM, AMD 5050e, Nvidia 8300 IGP, QNAP TS-439 Pro II, Linhes 7.4


Top
 Profile  
 
 Post subject:
PostPosted: Mon Jan 17, 2011 6:22 pm 
Offline
Joined: Wed Jan 04, 2006 10:20 am
Posts: 387
Location: South New Jersey, USA
Your welcome but I am afraid getting mythmusic to output to 2 different devices is beyond me. I guess you could try entering both devices in the mythmusic audio device but I think this is a long shot :?

_________________
LINHES 8.6.1 BE/FE - MSI K9N6SGM-V with AMD A64 X2 4600+, 4GB Ram. 1.5TB WD. HDHR Prime. Nvidia GT210. MCE remote.
FrontEnd - Dell Vostro 400 3.0GHz Core2Duo NVidia GeForce210. MCE Remote


Top
 Profile  
 
 Post subject:
PostPosted: Mon Jan 17, 2011 6:24 pm 
Offline
Joined: Wed Jun 10, 2009 8:39 pm
Posts: 118
Big boy stan wrote:
Your welcome but I am afraid getting mythmusic to output to 2 different devices is beyond me. I guess you could try entering both devices in the mythmusic audio device but I think this is a long shot :?


Thanks anyway, I thought it might be a bridge too far. 8)

_________________
* Asus M3N78-EM, AMD 5050e, Nvidia 8300 IGP, QNAP TS-439 Pro II, Linhes 7.4


Top
 Profile  
 
 Post subject:
PostPosted: Mon Jan 17, 2011 7:41 pm 
Offline
Joined: Tue Aug 15, 2006 11:14 am
Posts: 1343
Location: Orlando FL
i think pulseaudio might be the solution you are looking for. i havent used it but the description sounds promising.

_________________
My System


Top
 Profile  
 
 Post subject: Re: Alsa to usb
PostPosted: Wed Jan 19, 2011 9:39 pm 
Offline
Joined: Mon Dec 24, 2007 9:47 am
Posts: 535
Location: Ottawa, Canada
Ozdemon wrote:
Big boy stan wrote:
Would it be greedy to ask if it is possible to simultaneously send the music to both the TV over hdmi and to the usb speakers?

In other words is it possible to tell ALSA to send the signal to both "hw 0,3" and to "hw 1,0"?

There was a fairly recent discussion on this on the myth users mailing list. It is possible and if you are just using stereo on all outputs it is fairly easy with mods to alsa.conf. If you are mixing s/pdif or hdmi with stereo it gets trickier. But it was all in the thread.

The wiki covers the mixed digital/analogue here:
http://www.mythtv.org/wiki/Configuring_Digital_Sound

The user list discussion:
http://www.gossamer-threads.com/lists/m ... ers/466366
and
http://www.gossamer-threads.com/lists/m ... ers/463977?

Hope that points you in the right direction.


Top
 Profile  
 

Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 


All times are UTC - 6 hours




Who is online

Users browsing this forum: No registered users and 18 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group

Theme Created By ceyhansuyu