View unanswered posts    View active topics

All times are UTC - 6 hours





Post new topic Reply to topic  [ 1 post ] 
Print view Previous topic   Next topic  
Author Message
Search for:
PostPosted: Mon Nov 27, 2006 3:35 pm 
Offline
Joined: Thu Dec 15, 2005 2:49 pm
Posts: 5
The following .asoundrc works for me to route stereo sound simultaneously to digital and analog output. Doesn't work for 5.1 sound sources though.

Code:
pcm.!default {
  type plug
  slave {
    pcm multi
    rate 48000
  }
  ttable.0.0 1.0
  ttable.1.1 1.0
  ttable.0.2 1.0
  ttable.1.3 1.0
}

pcm.stereo {
  type plug
  slave {
    pcm multi
    rate 48000
  }
  ttable.0.0 1.0
  ttable.1.1 1.0
  ttable.0.2 1.0
  ttable.1.3 1.0
}

ctl.stereo {
 type hw
 card 0
}

pcm.multi {
  type multi
  slaves.a.pcm "analog-hw"
  slaves.a.channels 2
  slaves.b.pcm "digital-hw"
  slaves.b.channels 2
  bindings.0.slave   a
  bindings.0.channel 0
  bindings.1.slave   a
  bindings.1.channel 1
  bindings.2.slave   b
  bindings.2.channel 0
  bindings.3.slave   b
  bindings.3.channel 1
}

ctl.multi {
 type hw
 card 0
}

# Alias for analog output on the nForce2/4 (hw:0,0)
# - This is identical to the device named "default"--which
# always exists and refers to hw:0,0 (unless overridden)
# - Therefore, we can specify "hw:0,0", "default", or "analog"
# to access analog output on the nForce2/4
pcm.analog {
 type plug
 slave.pcm "analog-hw"
}

# Control device (mixer, etc.) for the nForce2 card
ctl.analog {
 type hwplug
 card 0
}

# Alias for (rate-converted) mixed analog output on the
# nForce2 (hw:0,0)
#  - This will accept audio input--regardless of rate--and
# convert to the rate required for the dmix plugin
# (in this case 48000Hz)
pcm.mixed-analog {
 type plug
 slave.pcm "dmix-analog"
}

# Control device (mixer, etc.) for the nForce2 card
ctl.mixed-analog {
 type hw
 card 0
}

# Alias for (rate-converted) digital (S/PDIF) output on the
# nForce2 (hw:0,2)
#  - This will accept audio input--regardless of rate--and
# convert to the rate required for the S/PDIF hardware
# (in this case 48000Hz)
pcm.digital {
 type plug
 slave.pcm "digital-hw"
}

# Control device (mixer, etc.) for the nForce2 card
ctl.digital {
 type hwplug
 card 0
}

# Alias for mixed (rate-converted) digital (S/PDIF) output on the
# nForce2/4 (hw:0,2)
#  - This will accept audio input--regardless of rate--and
# convert to the rate required for the S/PDIF hardware
# (in this case 48000Hz)
pcm.mixed-digital {
 type plug
 slave.pcm "dmix-digital"
}

# Control device (mixer, etc.) for the nForce2 card
ctl.mixed-digital {
 type hw
 card 0
}

# Control device (mixer, etc.) for the nForce2/4 card
ctl.dmix-digital {
 type hw
 card 0
}


Top
 Profile  
 

Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 1 post ] 


All times are UTC - 6 hours




Who is online

Users browsing this forum: No registered users and 17 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group

Theme Created By ceyhansuyu