Sorry to post on this again as I see it has been covered before. I have yet to find the answers to my questions.

I have an ATI TV wonder pro which has the cx88 chipset. I cat /dev/video as well as /dev/video0 and get the typical stream. I try running scantv and get the following:

[global]
freqtab = us-cable

[defaults]
input = Television
norm = NTSC-M

device has no tuner, exiting


I am running Knoppix 3.4 hdd install and have the proper module loaded for the card but cannot tune any channels. I am at a loss for what files need editing and where to go from here.

some other output for quicker help...

knoppix@ttyp1[knoppix]$ dmesg |grep cx88**
cx8800[0]: found at 0000:01:0a.0, rev: 5, irq: 18, latency: 32, mmio: 0xe6000000
cx8800[0]: subsystem: 1002:00f8, board: ATI TV Wonder Pro [card=4,autodetected]
tuner: chip found at addr 0xc0 i2c-bus cx8800[0]
cx8800[0]: i2c attach [client=(tuner unset)]
cx8800[0]: registered device video0 [v4l2]


knoppix@ttyp1[knoppix]$ lspci
0000:00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different version?) (rev c1)
0000:00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 1 (rev c1)
0000:00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4 (rev c1)
0000:00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3 (rev c1)
0000:00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2 (rev c1)
0000:00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5 (rev c1)
0000:00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a4)
0000:00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2)
0000:00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)
0000:00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)
0000:00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)
0000:00:04.0 Ethernet controller: nVidia Corporation nForce2 Ethernet Controller (rev a1)
0000:00:05.0 Multimedia audio controller: nVidia Corporation nForce MultiMedia audio [Via VT82C686B] (rev a2)
0000:00:06.0 Multimedia audio controller: nVidia Corporation nForce2 AC97 Audio Controler (MCP) (rev a1)
0000:00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI Bridge (rev a3)
0000:00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2)
0000:00:0d.0 FireWire (IEEE 1394): nVidia Corporation nForce2 FireWire (IEEE 1394) Controller (rev a3)
0000:00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1)
0000:01:0a.0 Multimedia video controller: Conexant Winfast TV2000 XP (rev 05)
0000:01:0b.0 RAID bus controller: Silicon Image, Inc. (formerly CMD Technology Inc) Silicon Image Serial ATARaid Controller [ CMD/Sil 3112/3112A ] (rev 02)
0000:02:00.0 VGA compatible controller: nVidia Corporation NV 36 [GeForce 5700] (rev a1)


I hope this helps inthe diagnosis.

Kyle