LinHES Forums http://forums.linhes.org/ |
|
Wrong CPU temp readings (RRD, sensors, MythWeb, or mbmon!) http://forums.linhes.org/viewtopic.php?f=5&t=16909 |
Page 1 of 1 |
Author: | fra [ Mon Oct 08, 2007 10:52 pm ] |
Post subject: | Wrong CPU temp readings (RRD, sensors, MythWeb, or mbmon!) |
Until yesterday, I was monitoring my CPU temp by just looking at the Status in MythWeb. Yesterday I decided to give RRD a try. The temperatures show as 127C ALL the time!!! While MythWeb was showing 35-48C (depending on load). Today, MythWeb shows 10C!!!!!! This is crazy!!! And RRD still ALWAYS shows 127C (just as crazy!). I tried running sensors but it didn't give much info. I tried sensors-detect, answered YES to everything, and rebooted. Now sensors gives: No sensors found! Make sure you loaded all the kernel drivers you need. Try sensors-detect to find out which these are. And MythWeb still, of course, shows 10C while RRD still shows 127C. Please help??!!! EDIT: I removed what sensors-detect added to /etc/modules and rebooted. Everything seemed to have gone to how it were before: sensors doesn't give anything helpful: tda9887-i2c-0-43 Adapter: cx88[0] tveeprom-i2c-0-50 Adapter: cx88[0] LG TDVS-H06xF-i2c-0-61 Adapter: cx88[0] MythTV status shows a temperature of 35C But as soon as I go to the rrd webpage, I see the constant 127C, and then MythTV status starts showing temps that are around 10C!! What's going on??? EDIT: I now think mbmon is showing 127 127 and 9 as temps. So the 127s are probably cos it can't read some of the temps. But the 9 is what it is reading and what it makes MythTV status show! Hopefully this will indicate to somewhat what may be going wrong??? [The temp seems to be read fine on MythWeb between reboot and the first time I try to view RRD graphs] |
Author: | copygod [ Sun Nov 11, 2007 9:22 pm ] |
Post subject: | |
currently having this same problem, any chance you've solved it in the last month? or anyone else have any ideas? |
Author: | tjc [ Sun Nov 11, 2007 10:19 pm ] |
Post subject: | |
The rrd temperature monitoring uses mbmon which does not work for all motherboards, and even for some of the ones it does work with, needs a different command line switch to produce good results. See the man page for the different "Access method" options. Code: man mbmon or Code: mbon -h I always have to prime it with Code: mbon -I before it gives me good results.
|
Author: | fra [ Thu Nov 15, 2007 10:52 am ] |
Post subject: | |
i just gave up and reconfigured rrd not to monitor any fans or temperatures. i simply go to the Status webpage on mythweb and lookup my current temperature. oh well.. |
Page 1 of 1 | All times are UTC - 6 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |