LinHES Forums http://forums.linhes.org/ |
|
No sound on analogue channels http://forums.linhes.org/viewtopic.php?f=5&t=18028 |
Page 1 of 1 |
Author: | tonyukw [ Mon Mar 10, 2008 10:39 am ] |
Post subject: | No sound on analogue channels |
Fairly new to this. I have 2 cards installed..the hdtv3000 and the hdtv 5500 Figured out how to get both cards working with HD on the 5500 and HD and analogue with the 3000. Have good pictures on all channels I have good quallity sound from both cards on HD BUT no sound at all on the Analgue channels There is obviously something I need to tweak somewhere I have 5F27 installed Not sure if the answer is already out ther somewhere ..have looked but not found it Thanks Tony |
Author: | pilesofspam [ Tue Mar 11, 2008 7:49 am ] |
Post subject: | |
I've had some rough luck with the analog tuner on an HD5500- it just doesn't look good on a big screen. BUT, lets try to solve your problem. Can you drop to a console and type (as root) lsmod | grep cx88 Look for cx88_blackbird and cx88_alsa. At any rate go ahead and post the results here. You might want to dig through your box of cables to find the one that came with the hd5500, and see if sound is showing up on the 1/8" stereo jack. |
Author: | tonyukw [ Tue Mar 11, 2008 12:12 pm ] |
Post subject: | analogue problems |
Thanks for the reply I am getting Analogue and HD pictures on the HD 3000 but no analogue sound I don't see any analogue settings" V4...." or whatever at all with the Hd5500 although it does imply on the label on the card that it is analogue. If it does indeed have an analogue signal receiver built in then either it is not being detected during setup or I am missing seeing it somehow. With the HD 3000 it is more obvious The actual way that you set up these cards is not clear to the uniniated Seems trial and error until eventually one figures it out I have a cable with the Hd5500 and tried connecting with the on board soundcard input ..... it has no effect. The sound I am getting is coming via the pci connections from the card to the motherboard sound chip The audio cable connection, whether it it is connected or not, makes no difference Seems strange to get sound and pictures on all the digital channels but no sound at all on the analogue channels If I can get HD and Analogue with sound on at least the HD3000 would be nice Anything else on the HD 5500 is a bonus. All the images I am getting are good quality. I use an HD antenna with a clear view of the Tucson AZ transmitter about 25 miles away Will try your suggestion..thanks again |
Author: | TVBox [ Tue Mar 11, 2008 1:17 pm ] |
Post subject: | Analog Sound on HD3000 HD5500 |
tonyukw The pcHD5500 dos not need the cable but the pcHD3000 most likely dos unless you turned the DMA sound on. Analog default is DMA sound on for the 5500......No cable needed Analog default is DMA sound off for the 3000......You need a cable ....only a few of the last ones where turned on 90% of the 3000's needed the jumper cable to the sound card "Capture Input" not the sound card input, there is a difference. Your sound will be off by two seconds if you don't have it right. This is a how to turn DMA sound on for a HD3000 http://www.mythtv.org/wiki/index.php/PC ... 2F_HD-5500 I did it on mine and it went smooth. The analog sound section is identical to the 5500 after the change. http://www.mythtv.org/wiki/index.php/PcHDTV_HD-3000 http://www.mythtv.org/wiki/index.php/PcHDTV_HD-5500 I would like to know how you got a clear picture on the pcHD3000 We really need a how to for this. I have failed to get sound working also. TVBox |
Author: | tonyukw [ Tue Mar 11, 2008 2:31 pm ] |
Post subject: | no sound on analogue channels |
Ok I missed it..duh The 5500 does have a V4l:/dev/video 0 the analgue part of the card This shows up on the Input settings Now have analogue and hD pictures on both cards. DTV sound on both but no analogue sound on either Will post what i found with lsmod | grep cx 88 |
Author: | tonyukw [ Tue Mar 11, 2008 2:47 pm ] |
Post subject: | no analgue sound |
Lsmod | grep cx 88 shows cx88_alsa and a whole load of other stuff ..probably not much of interest but I have it noted but does not show.... cs88_blackbird |
Author: | tonyukw [ Wed Mar 12, 2008 5:43 pm ] |
Post subject: | |
Looks like I'm in the wrong area of the forum for this topic According to this link http://mysettopbox.tv/phpBB2/viewtopic.php?t=16383 Analogue in R5F27 has been disabled until a driver issue is resolved Maybe I ought to wait for the next revision For the record my setup is : K8M800-MVLF Mini atx using on board sound Ge Force6600GT video card.. NVidia XFX 256MB RAM AMD Athlon 64 3000+2000 cpu HDTV 3000 and HDTV 5500 My box is an Nmedia HTPC100 Not had to to anything special to get good quality images on both cards |
Page 1 of 1 | All times are UTC - 6 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |