View unanswered posts    View active topics

All times are UTC - 6 hours





Post new topic Reply to topic  [ 17 posts ] 
Go to page 1, 2  Next

Print view Previous topic   Next topic  
Author Message
Search for:
PostPosted: Sat Jul 17, 2004 5:31 pm 
Offline
Joined: Sat Feb 14, 2004 2:32 pm
Posts: 94
Hello All,

I decided to switch from the Pinnacle remote module to the Hauppage (as I've read the Hauppage receiver is slightgly better). So I've rebuild lirc to suit my needs, I've replaced the lirc.conf and lircmd.conf the /home/mythtv/.lircrc file seems file.

irxevent runs as per the .fvwm/.fmwv2
irwatch shows input
When I strace -p on the irxevent, I see that it's getting the input

however the irxevent until never seems to do the key pressing.

Anyone recommend what I should be checking out,

Thanks a million,
Mike

_________________
Complete CCTV Security Cameras | Priceless Photos | Canada Mortgage | Prepaid Calling Cards


Top
 Profile  
 
 Post subject: did some forum searching
PostPosted: Sat Jul 17, 2004 5:49 pm 
Offline
Joined: Sat Feb 14, 2004 2:32 pm
Posts: 94
After searching through the forum, I see... no need for irxevent, however still nothing ...

Do I need to make / do something in /dev?

Thanks,
Mike

_________________
Complete CCTV Security Cameras | Priceless Photos | Canada Mortgage | Prepaid Calling Cards


Top
 Profile  
 
 Post subject: mplayer does some stuff
PostPosted: Sat Jul 17, 2004 8:26 pm 
Offline
Joined: Sat Feb 14, 2004 2:32 pm
Posts: 94
It also seems that some of the buttons work in Mplayer, but nothing at all in mythtv.

so strange (-;

Mike

_________________
Complete CCTV Security Cameras | Priceless Photos | Canada Mortgage | Prepaid Calling Cards


Top
 Profile  
 
 Post subject:
PostPosted: Sun Jul 18, 2004 1:09 am 
Offline
Joined: Mon Oct 06, 2003 10:38 am
Posts: 4978
Location: Nashville, TN
does your lircrc file specify the program to use?

for example

Code:
begin
    prog = mythtv
    button = pause
    config = P
end

_________________
Have a question search the forum and have a look at the KnoppMythWiki.

Xsecrets


Top
 Profile  
 
 Post subject:
PostPosted: Sun Jul 18, 2004 1:49 am 
Offline
Joined: Sat Feb 14, 2004 2:32 pm
Posts: 94
Hello Xsecret, here's a snippet from my /home/mythtv/.lircrc

begin
prog = mythtv
button = Off
config = Esc
end

However, the off button has no effect. I even tried

begin
prog = mythfrontend
button = Off
config = Esc
end


It's unclear to me how lirc maps the prog from mythtv to the bin name mythtvfrontend, but it had no effect anyhow ...

Thanks for your comments,
Mike

_________________
Complete CCTV Security Cameras | Priceless Photos | Canada Mortgage | Prepaid Calling Cards


Top
 Profile  
 
 Post subject:
PostPosted: Sun Jul 18, 2004 10:32 am 
Offline
Joined: Mon Oct 06, 2003 10:38 am
Posts: 4978
Location: Nashville, TN
try making that file /home/mythtv/.mythtv/lircrc instead of /home/mythtv/.lircrc

_________________
Have a question search the forum and have a look at the KnoppMythWiki.

Xsecrets


Top
 Profile  
 
 Post subject:
PostPosted: Sun Jul 18, 2004 11:55 am 
Offline
Joined: Fri Sep 19, 2003 7:05 pm
Posts: 5088
Location: Fontana, Ca
Xsecrets wrote:
try making that file /home/mythtv/.mythtv/lircrc instead of /home/mythtv/.lircrc
Exactly and symlink /home/mythtv/.mythtv/lircrc to /home/mythtv/.lircrc...

_________________
cesman

When the source is open, the possibilities are endless!


Top
 Profile  
 
 Post subject:
PostPosted: Sun Jul 18, 2004 9:26 pm 
Offline
Joined: Sat Feb 14, 2004 2:32 pm
Posts: 94
cesman wrote:
Xsecrets wrote:
try making that file /home/mythtv/.mythtv/lircrc instead of /home/mythtv/.lircrc
Exactly and symlink /home/mythtv/.mythtv/lircrc to /home/mythtv/.lircrc...



Tried that ... no luck *sigh*

haha, any other suggestions? (-;

Thanks again,
Mike

_________________
Complete CCTV Security Cameras | Priceless Photos | Canada Mortgage | Prepaid Calling Cards


Top
 Profile  
 
 Post subject:
PostPosted: Sun Jul 18, 2004 9:42 pm 
Offline
Joined: Mon Oct 06, 2003 10:38 am
Posts: 4978
Location: Nashville, TN
make sure you actually installed with the remote control option.

_________________
Have a question search the forum and have a look at the KnoppMythWiki.

Xsecrets


Top
 Profile  
 
 Post subject:
PostPosted: Tue Jul 20, 2004 9:12 am 
Offline
Joined: Sat Feb 14, 2004 2:32 pm
Posts: 94
Xsecrets wrote:
make sure you actually installed with the remote control option.


Umn installed with the "remote control option" ... ahh I don't think I did ...

I guess there is a specific binary with the haupagge features built in?

Thanks alot,
Mike

_________________
Complete CCTV Security Cameras | Priceless Photos | Canada Mortgage | Prepaid Calling Cards


Top
 Profile  
 
 Post subject:
PostPosted: Tue Jul 20, 2004 9:18 am 
Offline
Joined: Mon Oct 06, 2003 10:38 am
Posts: 4978
Location: Nashville, TN
well there is a special binary compiled with lirc support.

_________________
Have a question search the forum and have a look at the KnoppMythWiki.

Xsecrets


Top
 Profile  
 
 Post subject:
PostPosted: Tue Jul 20, 2004 10:52 am 
Offline
Joined: Fri Sep 19, 2003 7:05 pm
Posts: 5088
Location: Fontana, Ca
The Hauppuage grey remote should work out the box. Since you have a great deal of difficulty, I suggest backing up then reinstalling using the auto upgrade option. I'm assuming you have the grey remote. If you have the black remote, you just need the lircd.conf and lircrc which are in the ivtv and or mythtv source(cannot remember which at the moment). Delete /home/mythtv/.mythtv/lircrc before backing up...

_________________
cesman

When the source is open, the possibilities are endless!


Top
 Profile  
 
 Post subject:
PostPosted: Tue Jul 20, 2004 11:09 am 
Offline
Joined: Mon Oct 06, 2003 10:38 am
Posts: 4978
Location: Nashville, TN
and if you are going to reinstall remember to choose the ir remote option, so you get the binaries that have lirc support in them.

_________________
Have a question search the forum and have a look at the KnoppMythWiki.

Xsecrets


Top
 Profile  
 
 Post subject:
PostPosted: Tue Jul 20, 2004 9:55 pm 
Offline
Joined: Sat Feb 14, 2004 2:32 pm
Posts: 94
Xsecrets wrote:
and if you are going to reinstall remember to choose the ir remote option, so you get the binaries that have lirc support in them.


Ehh ... I think i'm going to try finding these "haupagge capable binaries" on the CD and seeing if I can replace my existing binaries.

Think that mightg succeed?

Thanks again!
Mike

_________________
Complete CCTV Security Cameras | Priceless Photos | Canada Mortgage | Prepaid Calling Cards


Top
 Profile  
 
 Post subject:
PostPosted: Tue Jul 20, 2004 11:13 pm 
Offline
Joined: Mon Oct 06, 2003 10:38 am
Posts: 4978
Location: Nashville, TN
sure if you did the default install and didn't change anything you can as root type install-i686-l and it will install them for you.

_________________
Have a question search the forum and have a look at the KnoppMythWiki.

Xsecrets


Top
 Profile  
 

Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 17 posts ] 
Go to page 1, 2  Next



All times are UTC - 6 hours




Who is online

Users browsing this forum: No registered users and 81 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group

Theme Created By ceyhansuyu