LinHES Forums http://forums.linhes.org/ |
|
hauppauge gray remote - pre-made Lircmap and keymap for XBMC http://forums.linhes.org/viewtopic.php?f=5&t=20687 |
Page 1 of 1 |
Author: | graysky [ Thu Dec 17, 2009 4:01 am ] |
Post subject: | hauppauge gray remote - pre-made Lircmap and keymap for XBMC |
I have an old PVR-250 capture card and remote referred to as "the hauppauge gray remote" (pictured below). Does anyone have or know where I can find a pre-made Lircmap.xml and keymap.xml that would work with this remote with XBMC that's included in the R6 repos? |
Author: | Big_D_271 [ Fri Oct 15, 2010 6:39 pm ] |
Post subject: | |
You ever get this to work? I have the remote from the PVR-350 that I would like to work with XBMC on R6.03 |
Author: | tjc [ Fri Oct 15, 2010 11:03 pm ] |
Post subject: | |
I've posted ones for R5 that should still work. This post is probably still a good place to start. http://knoppmyth.net/phpBB2/viewtopic.php?t=15551 |
Author: | graysky [ Sat Oct 16, 2010 4:16 am ] |
Post subject: | |
Big_D_271 wrote: You ever get this to work? I have the remote from the PVR-350 that I would like to work with XBMC on R6.03
Yeah I did but it's been too long. I don't have a keymap.xml but here is my ~/USERNAME/.xbmc/userdata/Lircmap.xml Code: <!-- This file contains the mapping of LIRC keys to XBMC keys used in Keymap.xml -->
<!-- --> <!-- How to add remotes --> <!-- <remote device="name_Lirc_calls_the_remote"> --> <!-- --> <!-- For the commands the layout following layout is used --> <!-- <XBMC_COMMAND>LircButtonName</XBMC_COMMAND> --> <!-- --> <!-- For a list of XBMC_COMMAND's check out the <remote> sections of keymap.xml --> <lircmap> <remote device="hauppauge_pvr"> <power>Power</power> <one>1</one> <two>2</two> <three>3</three> <four>4</four> <five>5</five> <six>6</six> <seven>7</seven> <eight>8</eight> <nine>9</nine> <back>Back/Exit</back> <zero>0</zero> <menu>Menu</menu> <info>Green</info> <volumeplus>Blue</volumeplus> <volumeminus>Yellow</volumeminus> <title>Red</title> <up>Ch+</up> <down>Ch-</down> <left>Vol-</left> <right>Vol+</right> <select>Ok</select> <forward>Forward</forward> <reverse>Rewind</reverse> <mute>Mute</mute> <clear>Blank</clear> <star>Full</star> <skipminus>Replay</skipminus> <skipplus>Skip</skipplus> <pause>Pause</pause> <stop>Stop</stop> <play>Play</play> </remote> </lircmap> |
Author: | Big_D_271 [ Sat Oct 16, 2010 5:08 pm ] |
Post subject: | |
@graysky, I actually discovered a post from you on the XBMC forum where this is also discussed. I was able to add the "Hauppaug_350" to the Lircmap.xm similar to what you've posted and it works!! So excited to be running XBMC on my LinHES box! The wife loves ProjectM with Music Thanks for all your helpful posts Graysky. |
Author: | graysky [ Sun Oct 17, 2010 5:00 am ] |
Post subject: | |
Big_D_271 wrote: @graysky, I actually discovered a post from you on the XBMC forum where this is also discussed. I was able to add the "Hauppaug_350" to the Lircmap.xm similar to what you've posted and it works!! So excited to be running XBMC on my LinHES box! The wife loves ProjectM with Music
Thanks for all your helpful posts Graysky. You're welcome - always glad to give back. Can you paste the URL to the post to which you referred for others to see? EDIT: was it this? http://forum.xbmc.org/showthread.php?t=64854 |
Author: | Big_D_271 [ Mon Nov 01, 2010 8:10 pm ] |
Post subject: | |
Yes it was that post. Thanks again! Now the only problem is XBMC somehow has a different time than myth?! ... like 6 hrs off or something. |
Author: | RacerX [ Mon Nov 01, 2010 10:27 pm ] |
Post subject: | |
You can set your preferred time zone in XBMC thru the menu /SYSTEM/Appearance/International/ It will give you options for Country Timezone and Timezone. |
Page 1 of 1 | All times are UTC - 6 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |