LinHES Forums http://forums.linhes.org/ |
|
Multihead video out XF86Config http://forums.linhes.org/viewtopic.php?f=5&t=7870 |
Page 1 of 1 |
Author: | scsever [ Sat Jan 14, 2006 10:14 am ] |
Post subject: | Multihead video out XF86Config |
I have a pvr-350 and also an Nvidia graphics adapter. I want XF86Config configured so that I can use both at the same time. I currently have the pvr-350 configured and working (see below file) but I want to add in the Nvidia settings and monitor and I'm stuck there. The pvr-350 will always be connected to the TV and the Nvidia will either connect to a monitor or hopefully provide me with a remote X display that is larger than the 800x600 that I am getting now. Maybe someone already has this working and would send their config? BTW- most of the configs that I have found in searches use a ServerLayout such as "Screen 0 LeftOf " "Screen1" isn't this type of config used when the X display is over two monitors? (see I'm stuck right at the top of the config file) ![]() Thanks for your help mythtv:/etc/X11# cat XF86Config-4 Section "ServerLayout" Identifier "XFree86 Configured" Screen 0 "TV Screen" InputDevice "PS/2 Mouse" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "ServerFlags" Option "AllowMouseOpenFail" "true" EndSection Section "Files" RgbPath "/usr/X11R6/lib/X11/rgb" ModulePath "/usr/X11R6/lib/modules" FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/misc" FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/75dpi" FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/100dpi" FontPath "/usr/X11R6/lib/X11/fonts/Speedo" FontPath "/usr/X11R6/lib/X11/fonts/PEX" # Additional fonts: Locale, Gimp, TTF... FontPath "/usr/X11R6/lib/X11/fonts/cyrillic" # FontPath "/usr/X11R6/lib/X11/fonts/latin2/75dpi" # FontPath "/usr/X11R6/lib/X11/fonts/latin2/100dpi" # True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig! FontPath "/usr/X11R6/lib/X11/fonts/Type1" FontPath "/usr/share/fonts/ttf/western" FontPath "/usr/share/fonts/ttf/decoratives" FontPath "/usr/share/fonts/truetype" FontPath "/usr/share/fonts/truetype/openoffice" FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera" FontPath "/usr/share/fonts/latex-ttf-fonts" FontPath "/usr/X11R6/lib/X11/fonts/defoma/CID" FontPath "/usr/X11R6/lib/X11/fonts/defoma/TrueType" EndSection Section "Module" Load "ddc" # ddc probing of monitor # Load "GLcore" Load "dbe" Load "v4l" Load "extmod" # Load "glx" Load "bitmap" # bitmap-fonts Load "speedo" Load "type1" Load "freetype" Load "record" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "keyboard" Option "CoreKeyboard" Option "XkbRules" "xfree86" Option "XkbModel" "pc105" Option "XkbLayout" "us" EndSection Section "InputDevice" Identifier "Serial Mouse" Driver "mouse" Option "Protocol" "Microsoft" Option "Device" "/dev/ttyS0" Option "Emulate3Buttons" "true" Option "Emulate3Timeout" "70" Option "SendCoreEvents" "true" EndSection Section "InputDevice" Identifier "PS/2 Mouse" Driver "mouse" Option "Protocol" "auto" Option "ZAxisMapping" "4 5" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "true" Option "Emulate3Timeout" "70" Option "SendCoreEvents" "true" EndSection Section "InputDevice" Identifier "USB Mouse" Driver "mouse" Option "Device" "/dev/input/mice" Option "SendCoreEvents" "true" Option "Protocol" "IMPS/2" Option "ZAxisMapping" "4 5" Option "Buttons" "5" EndSection Section "Monitor" Identifier "NTSC Monitor" HorizSync 30-50 VertRefresh 60-60 DisplaySize 320 180 Mode "720x480" # D: 34.563 MHz, H: 37.244 kHz, V: 73.897 Hz DotClock 34.564 HTimings 720 752 840 928 VTimings 480 484 488 504 Flags "-HSync" "-VSync" EndMode EndSection Section "Device" Identifier "Hauppauge PVR 350 iTVC15 Framebuffer" Driver "ivtvdev" ### change fb1 to whatever number you got in the previous section Option "fbdev" "/dev/fb1" Option "ivtvdev" "/dev/fb1" ### change the busid to whatever is reported by lspci. Note that ### output of lspci is hex, so add a preceding "0x" to the BusID BusID "PCI:00:010:0" EndSection Section "Screen" Identifier "TV Screen" Device "Hauppauge PVR 350 iTVC15 Framebuffer" Monitor "NTSC Monitor" DefaultDepth 24 DefaultFbbpp 32 Subsection "Display" Depth 24 FbBpp 32 Modes "720x480" EndSubsection EndSection Section "DRI" Mode 0666 EndSection |
Page 1 of 1 | All times are UTC - 6 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |