View unanswered posts    View active topics

Board index Linux General

All times are UTC - 6 hours





Post new topic Reply to topic  Page 1 of 1
  [ 10 posts ] 
Print view Previous topic   Next topic  
Author Message
Search for:
whosmatt
PostPosted: Mon Jan 16, 2006 12:08 pm 
Offline
Joined: Thu Jan 05, 2006 4:53 pm
Posts: 6
once I got knoppmyth installed and mostly working, i edited my XF86Config-4 to enable tvout:

here's my XF86Config-4

Code:
Section "ServerLayout"
        Identifier     "XFree86 Configured"
        Screen      0  "tvout" 0 0
        InputDevice    "Keyboard0" "CoreKeyboard"
# PS/2 Mouse using /dev/input/mice in Kernel 2.6
# Serial Mouse not detected
        InputDevice    "USB Mouse" "CorePointer"
EndSection

Section "ServerFlags"
        Option "AllowMouseOpenFail"  "true"

EndSection

Section "Files"
        RgbPath      "/usr/X11R6/lib/X11/rgb"
        ModulePath   "/usr/X11R6/lib/modules"
        FontPath     "/usr/X11R6/lib/X11/fonts/misc:unscaled"
        FontPath     "/usr/X11R6/lib/X11/fonts/misc"
        FontPath     "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
        FontPath     "/usr/X11R6/lib/X11/fonts/75dpi"
        FontPath     "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
        FontPath     "/usr/X11R6/lib/X11/fonts/100dpi"
        FontPath     "/usr/X11R6/lib/X11/fonts/Speedo"
        FontPath     "/usr/X11R6/lib/X11/fonts/PEX"
# Additional fonts: Locale, Gimp, TTF...
        FontPath     "/usr/X11R6/lib/X11/fonts/cyrillic"
#       FontPath     "/usr/X11R6/lib/X11/fonts/latin2/75dpi"
#       FontPath     "/usr/X11R6/lib/X11/fonts/latin2/100dpi"
# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
        FontPath     "/usr/X11R6/lib/X11/fonts/Type1"
        FontPath     "/usr/share/fonts/ttf/western"
        FontPath     "/usr/share/fonts/ttf/decoratives"
        FontPath     "/usr/share/fonts/truetype"
        FontPath     "/usr/share/fonts/truetype/openoffice"
        FontPath     "/usr/share/fonts/truetype/ttf-bitstream-vera"
        FontPath     "/usr/share/fonts/latex-ttf-fonts"
        FontPath     "/usr/X11R6/lib/X11/fonts/defoma/CID"
        FontPath     "/usr/X11R6/lib/X11/fonts/defoma/TrueType"
EndSection

Section "Module"
        Load  "ddc"  # ddc probing of monitor
#       Load  "GLcore"
        Load  "dbe"
#       Load  "dri"
        Load  "extmod"
        Load  "glx"
        Load  "bitmap" # bitmap-fonts
        Load  "speedo"
        Load  "type1"
        Load  "freetype"
        Load  "record"
EndSection

Section "InputDevice"
        Identifier  "Keyboard0"
        Driver      "keyboard"
        Option      "CoreKeyboard"
        Option "XkbRules" "xfree86"
        Option "XkbModel" "pc105"
        Option "XkbLayout" "us"

EndSection

Section "InputDevice"
        Identifier  "Serial Mouse"
        Driver      "mouse"
        Option      "Protocol" "Microsoft"
        Option      "Device" "/dev/ttyS0"
        Option      "Emulate3Buttons" "true"
        Option      "Emulate3Timeout" "70"
        Option      "SendCoreEvents"  "true"
EndSection

Section "InputDevice"
        Identifier  "PS/2 Mouse"
        Driver      "mouse"
        Option      "Protocol" "auto"
Option          "ZAxisMapping"          "4 5"
        Option      "Device" "/dev/psaux"
        Option      "Emulate3Buttons" "true"
        Option      "Emulate3Timeout" "70"
        Option      "SendCoreEvents"  "true"
EndSection

Section "InputDevice"
        Identifier      "USB Mouse"
        Driver          "mouse"
        Option          "Device"                "/dev/input/mice"
        Option          "SendCoreEvents"        "true"
        Option          "Protocol"              "IMPS/2"
        Option          "ZAxisMapping"          "4 5"
        Option          "Buttons"               "5"
EndSection

# Auto-generated by KNOPPIX mkxf86config -NOT!!!

Section "Monitor"
   Identifier "TV"
   HorizSync 30-50
   VertRefresh 60
   VendorName "unknown"
   ModelName "unknown"
EndSection


Section "Device"
        ### Available Driver options are:-
# sw_cursor is needed for some ati and radeon cards
        #Option     "sw_cursor"
        #Option     "hw_cursor"
        #Option     "NoAccel"
        #Option     "ShowCache"
        #Option     "ShadowFB"
        #Option     "UseFBDev"
        #Option     "Rotate"
        Identifier  "Card0"
# The following line is auto-generated by KNOPPIX mkxf86config
        Driver      "nvidia"
        VendorName  "All"
        BoardName   "All"
#       BusID       "PCI:1:0:0"
    Option "TVStandard" "NTSC-M"
    Option "ConnectedMonitor" "dfp,tv"
    Option "TVOutFormat" "COMPOSITE"
    Option "NoLogo" "True"
    Option "RenderAccel" "True"
    Option "TVOverScan" "0.9"
EndSection

Section "Screen"
  Identifier "tvout"
  Device "Card0"
  Monitor "TV"
  DefaultColorDepth 24
  Subsection "Display"
   Depth 24
   Modes "640x480"
   ViewPort 0 0
  EndSubSection
  # Only the official NVIDIA driver supports twinview
  # these setting are an example
  #Option "TwinView" "true"
  #Option "SecondMonitorVendorName" "unknown"
  #Option "SecondMonitorModelName" "unknown"
  #Option "SecondMonitorHorizSync" "30-82"
  #Option "SecondMonitorVertRefresh" "50-75"
  #Option "MetaModes" "1024x768, 1024x768; 800x600, 800x600; 640x480, 640x480"
  #Option "TwinViewOrientation" "Clone"
  #Option "ConnectedMonitor" "dfp,tv"
EndSection

Section "DRI"
        Mode 0666
EndSection


now, on boot, mythtv starts, and i get the "pre-scaling images" progress bars, and then just the background. no menu or anything.

FYI my TV is the only monitor connected. i did the setup with a regular monitor, then switched over to TV

i can ssh into the box to edit config files. what do i need to edit to fix this?

thanks

matt
Top
 Profile  
 
Xsecrets
 Post subject:
PostPosted: Mon Jan 16, 2006 12:14 pm 
Offline
Joined: Mon Oct 06, 2003 10:38 am
Posts: 4978
Location: Nashville, TN
looks like you have edited out all of your metamodes, so you probably need to change this line too.
Code:
Option "ConnectedMonitor" "dfp,tv"


change "dfp,tv" to "tv"

_________________
Have a question search the forum and have a look at the KnoppMythWiki.

Xsecrets
Top
 Profile  
 
whosmatt
 Post subject:
PostPosted: Mon Jan 16, 2006 12:29 pm 
Offline
Joined: Thu Jan 05, 2006 4:53 pm
Posts: 6
Xsecrets wrote:
looks like you have edited out all of your metamodes, so you probably need to change this line too.
Code:
Option "ConnectedMonitor" "dfp,tv"


change "dfp,tv" to "tv"


done. however, i get the same result.

when i was running freevo on this box, the above settings worked fine. freevo has a conf file that specifies the display resolution. if the resolution in freevo was set higher than the X resolution, i would only see part of the freevo screen. could this be what's happening?

matt
Top
 Profile  
 
cesman
 Post subject:
PostPosted: Mon Jan 16, 2006 12:33 pm 
Offline
Joined: Fri Sep 19, 2003 7:05 pm
Posts: 5088
Location: Fontana, Ca
Perhaps give the sample tv file a try?

_________________
cesman

When the source is open, the possibilities are endless!
Top
 Profile  
 
whosmatt
 Post subject:
PostPosted: Mon Jan 16, 2006 12:38 pm 
Offline
Joined: Thu Jan 05, 2006 4:53 pm
Posts: 6
cesman wrote:
Perhaps give the sample tv file a try?


where might i find this file?
Top
 Profile  
 
cesman
 Post subject:
PostPosted: Mon Jan 16, 2006 12:39 pm 
Offline
Joined: Fri Sep 19, 2003 7:05 pm
Posts: 5088
Location: Fontana, Ca
Perhaps doing an ls in /etc/X11?

_________________
cesman

When the source is open, the possibilities are endless!
Top
 Profile  
 
Xsecrets
 Post subject:
PostPosted: Mon Jan 16, 2006 12:39 pm 
Offline
Joined: Mon Oct 06, 2003 10:38 am
Posts: 4978
Location: Nashville, TN
same place you find XF86Config-4

/etc/X11

there are several example XF86Config-4.some.kind.of.sample files in there.

_________________
Have a question search the forum and have a look at the KnoppMythWiki.

Xsecrets
Top
 Profile  
 
whosmatt
 Post subject:
PostPosted: Mon Jan 16, 2006 10:00 pm 
Offline
Joined: Thu Jan 05, 2006 4:53 pm
Posts: 6
thanks, got it working fine. anybody know how to make nvtv settings survive a restart? i use nvtv to adjust the geometry.
Top
 Profile  
 
Greg Frost
 Post subject:
PostPosted: Mon Jan 16, 2006 10:30 pm 
Offline
Joined: Mon May 10, 2004 8:08 pm
Posts: 1891
Location: Adelaide, Australia
If you can do it from the command line, have a look at the nvtv related changes that the script in this post makes: http://mysettopbox.tv/phpBB2/viewtopic.php?t=6645

If you cant do it from the command line, you need to patch the nvtv source so that you can. There is some info on the wiki about doing this including an example patch. http://knoppmythwiki.org/index.php?page=TVOverScanHowto
Top
 Profile  
 
cesman
 Post subject:
PostPosted: Mon Jan 16, 2006 10:33 pm 
Offline
Joined: Fri Sep 19, 2003 7:05 pm
Posts: 5088
Location: Fontana, Ca
:x Search! Don't frelling hop to another issue in the same thread.

_________________
cesman

When the source is open, the possibilities are endless!
Top
 Profile  
 

Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 10 posts ] 


Board index Linux General

All times are UTC - 6 hours




Who is online

Users browsing this forum: No registered users and 11 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group

Theme Created By ceyhansuyu