LinHES Forums http://forums.linhes.org/ |
|
Upgrade advice please http://forums.linhes.org/viewtopic.php?f=6&t=19901 |
Page 1 of 1 |
Author: | tophee [ Wed May 27, 2009 5:54 am ] |
Post subject: | Upgrade advice please |
Hi guys, I've just ordered a new TV and I intend to upgrade the hardware in my Mythbox. I will be using some of the key components from my previous box. Essentially I'll be reusing the tuner cards (Nova-t x2) and the storage (1x500gb Samsung Spinpoint + 1x1Tb Samsung Spinpoint). I intend to add a Nova-S for HD content sometime in the near future. The new tv is a Samsung B37B650TW. I've ordered a hdmi cable to go with it and I've got a Nvidia 9500 w/512m ram which has an hdmi socket as it's tv out. How do I set up the correct resolution for the tv from the outset? I'm considering reinstalling 5.5 as I have half an idea about what I am doing with that OS, compared to R6. Should I go with R6 instead? Many thanks in advance. Chris |
Author: | mihanson [ Wed May 27, 2009 5:00 pm ] |
Post subject: | Re: Upgrade advice please |
tophee wrote: How do I set up the correct resolution for the tv from the outset
If you edit your xorg.conf so that the first modeline it uses is "nvidia-auto-select" it should read the EDID of your TV/monitor and select the "best" resolution it's capable of. i.e. Code: Section "Screen"
Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Depth 24 Modes "nvidia-auto-select" "1280x720" "800x600" "640x480" EndSubSection EndSection |
Author: | tophee [ Thu May 28, 2009 2:30 am ] |
Post subject: | |
Thanks for that mike. That suggests a post install tweak. I guess I should go with a regular install (i.e. not using the 'tv' switch) on a 5.5 upgrade. |
Author: | marc.aronson [ Thu May 28, 2009 9:19 am ] |
Post subject: | |
Just out of curiosity, what hardware are you upgrading to? I went from a Pentium D930 to a Core 2 Duo E8400 and my power consumption at idle dropped from 135 watts to 85 watts. Peak power consumption dropped from 180 watts to ~105 watts. This is a system with 2 disk drives and 3 tuners. Marc |
Author: | tophee [ Fri May 29, 2009 2:24 am ] |
Post subject: | |
Hi Marc, As mentioned, the new TV is a Samsung B37B650TW (1080p) and although I'm only using DVB-t atm but the picture is fantastic, over HDMI. Right the new hardware is: E7400 with a TRUE cooler w. Noctura fan Asus P5QL-E, Gainward 9500GT w. 512mb ram 2G OZ PC6400 Ram Tuner cards and hdd as in sig. (I'll update that later!) I plan to add a DVB-S card and a slot loading DVD/BluRay drive - because one day... I need to borrow the power gauge thing off my father-in-law to see what kind of power this set up now draws. My very unscientific view is it is a lot cooler running. Which means less power. ![]() I'm very pleased with the setup now. Just need to build a ventilated cabinet but that's another story, which I intend to document when I get around to building it. Regards Chris |
Author: | tophee [ Fri May 29, 2009 11:12 am ] |
Post subject: | |
mmm, interesting.... my network card does not appear to be recognised. It's certainy enabled in the BIOS, but 5.5 says it's not recognised. Further investigation is required. -Edit- I ended up installing R6 beacause there is not kernal support for my new motherboard's network card in 5.5. |
Page 1 of 1 | All times are UTC - 6 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |