View unanswered posts    View active topics

All times are UTC - 6 hours

Post new topic Reply to topic  [ 3 posts ] 
Print view Previous topic   Next topic  
Author Message
Search for:
PostPosted: Sat Nov 15, 2008 2:30 am 
Joined: Thu Feb 16, 2006 2:17 am
Posts: 25
Location: Berlin

I have installed Knoppmyth 5.5 on a Via Epia Me6000 Mainboard and I need to use the onboard chipset CLE266 for video acceleration.

I have also installed xserver packages of openchrome.
In my xorg.conf I start the driver in section "Device" with "openchrome"

This all works as I have a perfect working DVD-playback with Xine.

Unfortunately my Mythfrontend does not use the hw acceleration although I have tried different selection in the tv output configuration.

I have tried XvMC as well as Via-XvMC.

As video renderer there is xvmc-blit available but when I start whatching TV/recording I receive messages like

> VideoOutputXv: Desired video renderer 'xvmc-blit' not available.
> codec 'None' makes 'xv-blit,xshm,xlib,' available, using 'xv-blit' instead.

But the fall back renderer obviously do not support hw acceleration. (High CPU load, choppy video)

I did some research in the internet and I found that this might be an issue of the new in Mythtv version 0.21 (which I have installed)

    ~$ mythfrontend --version
    Please include all output in bug reports.
    MythTV Version : 17686M
    MythTV Branch : branches/release-0-21-fixes
    Library API : 0.21.20080304-1
    Network Protocol : 40
    Options compiled in:
    linux release using_oss using_alsa using_arts using_jack using_backend using_dbox2 using_directfb using_dvb using_firewire using_frontend using_hdhomerun using_iptv using_ivtv using_joystick_menu using_libfftw3 using_lirc using_opengl_vsync using_opengl_video using_v4l using_x11 using_xrandr using_xv using_xvmc using_xvmcw using_xvmc_vld using_bindings_perl using_bindings_python using_opengl using_ffmpeg_threads using_libavc_5_3 using_liv

My (urgent) questions:

- which renderer is the right one to pass video out through CLE266? When I tried any other renderer offered in the Mythtv settings, I received a very choppy video :-(

- how can I install Mythtv 0.20 instead?
- Do I need to recompile 0.21? But how?

Thanks for help


KnoppMyth R5F27
VIA Epia ME6000
TechniSat AirStar 2 TV (DVB-t)

PostPosted: Thu Nov 03, 2011 4:19 pm 
Joined: Thu Feb 16, 2006 2:17 am
Posts: 25
Location: Berlin
Hello forum,

after a while I try again to get R5.5 working on my VIA Epia ME6000 Mainboard.

Again, I did a clean Auto Install and again I face similar problems like above.

When I start "watching TV" I see a black screen for a few seconds, then Mythfrontend crashes.

My settings in Mythfrontend configuration TV playback:

I added a new output profile with only one setting for all resolutions:

Decoder: VIA XvMC  #this sounds suitable for VIA CLE266 decoder#
Video Renderer: xvmc-blit  #nothing else selectable#

When I run Mythfrontend in a terminal, I receive those messages:
2011-11-03 21:56:29.871 Connecting to backend server: (try 1 of 5)
2011-11-03 21:56:29.876 Using protocol version 40
2011-11-03 21:56:29.899 TV: Attempting to change from None to WatchingLiveTV
2011-11-03 21:56:29.902 Using protocol version 40
2011-11-03 21:56:33.264 New DB connection, total: 3
2011-11-03 21:56:33.266 Connected to database 'mythconverg' at host:
2011-11-03 21:56:33.372 NVP: Disabling Audio, params(-1,2,44100)
2011-11-03 21:56:33.811 VideoOutputXv: Desired video renderer 'xvmc-blit' not available.
                        codec 'None' makes 'opengl,xv-blit,xshm,xlib,' available, using 'opengl' instead.
2011-11-03 21:56:34.480 GLVid, Error: Fatal error

here some lines of my xorg.conf (generated during installation):

Section "Device"
        ### Available Driver options are:-
# sw_cursor is needed for some ati and radeon cards
        #Option     "sw_cursor"
        #Option     "hw_cursor"
        #Option     "NoAccel"
        #Option     "ShowCache"
        #Option     "ShadowFB"
        #Option     "UseFBDev"
        #Option     "Rotate"
        Identifier  "Card0"
# The following line is auto-generated by KNOPPIX mkxf86config
        Driver      "openchrome"
        VendorName  "All"
        BoardName   "All"
#       BusID       "PCI:1:0:0"

$lsmod | grep via
via                    43520  2
drm                    75668  3 via
snd_via82xx            26776  0
gameport               15240  1 snd_via82xx
snd_ac97_codec         99620  1 snd_via82xx
snd_pcm                70916  3 snd_via82xx,snd_ac97_codec,snd_pcm_oss
snd_page_alloc         11912  2 snd_via82xx,snd_pcm
snd_mpu401_uart        10880  1 snd_via82xx
i2c_viapro             11412  0
via_agp                12160  1
via_ircc               23572  0
agpgart                30808  2 drm,via_agp
i2c_core               23680  4 i2c_viapro,mt352,stv0299,b2c2_flexcop
snd                    52644  12 snd_via82xx,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_mpu401_uart,snd_seq_dummy,snd_seq_oss,snd_seq,snd_timer,snd_rawmidi,snd_seq_device
irda                  122552  1 via_ircc

I have a fine playback of DVD with low CPU load using
xine -V xxmc dvd://
So HW acceleration through CLE266 seems to work.

here ... stcount=14 I found a posting with a similar problem. May I try this?

What else may I do?

KnoppMyth R5F27
VIA Epia ME6000
TechniSat AirStar 2 TV (DVB-t)

 Post subject:
PostPosted: Thu Dec 22, 2011 3:06 am 
Joined: Fri Sep 19, 2003 7:05 pm
Posts: 5088
Location: Fontana, Ca
If I recall, it should just be "XvMC" not, "XvMC-blit". Did you get it resolved? I can install 5.5 on a system w/ a Unichrome chipset if it would help...


When the source is open, the possibilities are endless!


Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC - 6 hours

Who is online

Users browsing this forum: No registered users and 6 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group

Theme Created By ceyhansuyu