LinHES Forums http://forums.linhes.org/ |
|
Remotes http://forums.linhes.org/viewtopic.php?f=6&t=6232 |
Page 2 of 4 |
Author: | Girkers [ Tue Oct 11, 2005 4:50 pm ] |
Post subject: | |
Some of the buttons work out of the box, eg. on the main MythTV menu, Channel Up and Channel Down work as Pg Up & Pg Down respectively. Cancel works as expected, as does the "play" button (enter). But apart from that I can't help. I did post a question in the Hardware forum asking for assistance, but this did not seem to get me too far. I am happy to play with it and get it working properly except I don't know where to go. Sorry I am not much help. |
Author: | Human [ Tue Oct 11, 2005 5:41 pm ] |
Post subject: | |
Girkers wrote: Some of the buttons work out of the box, eg. on the main MythTV menu, Channel Up and Channel Down work as Pg Up & Pg Down respectively. Cancel works as expected, as does the "play" button (enter). Those mappings will probably not work in the next release, but see below. Girkers wrote: I am happy to play with it and get it working properly except I don't know where to go.
Sorry I am not much help. Why don't you post what you have as your lircrc, and I'll see what I can do. I can't guarantee it'll be auto-detected and configured for the next release, though. |
Author: | jbman [ Tue Oct 11, 2005 7:28 pm ] |
Post subject: | |
i have the same remote/dvb card setup. it doesn't use lirc instead it works as a keyboard interface. the buttons on the remote just "type" up different keys on the system. the list of keys can be found here. The one that i want to setup is the "power" button. but as you can tell from the buttons it produces it just goes into a tty screen. i tried to change it to run the command "mythfrontend" but i dont have full understanding of fluxbox as of yet. so my guess is you don't need to use lirc at all to use this remote as i have not done anything with it and it works right away with all the knoppmyth versions. |
Author: | johnboy68 [ Wed Oct 12, 2005 8:03 am ] |
Post subject: | |
I know this is a little off topic but... What is a good all around remote to use with a homemade IR receiver? I have been working to get all the parts I need to buld this settopbox to include the IR receiver via the instructions on LIRCs website. I have been out of town and all the parts have arrived at my house to put everything together so I am just trying to do all my homework now. I look forward to posting my results on the build. Thanks for all the hard work! |
Author: | Human [ Wed Oct 12, 2005 8:33 am ] |
Post subject: | |
johnboy68 wrote: What is a good all around remote to use with a homemade IR receiver?
Just a quick reply - deadlines! - but as a way of putting it back on topic, here's what's currently configurable using lirc-reconfig.sh, which will run automatically in the next release: hauppauge, atiusb, streamzap, dvico, mceusb, rca-6n1, avermedia, avermedia98, avermedia_vdomate, bestbuy, bestbuy2, chronos, cph06x, flyvideo, gvbctv5pci, kworld, leadtek_0007, leadtek_0010, pixelview_pak, pixelview_pro, adaptec, alsa_usb, breakoutbox, hercules_smarttv_stereo, knc_one, leadtek_pvr2000, pixelview_bt878, provideo, tvbox If you don't see your remote here, be sure to post your lircrc and /etc/lirc/lircd.conf (optionally, hardware.conf, lircmd.conf) as well as any nonstandard things you had to to do make it work. |
Author: | kmkittre [ Thu Oct 13, 2005 1:47 pm ] |
Post subject: | |
Cecil. I'd like to send you my files, but I cannot find your e-mail address... |
Author: | Human [ Thu Oct 13, 2005 3:04 pm ] |
Post subject: | |
kmkittre wrote: Cecil. I'd like to send you my files, but I cannot find your e-mail address...
You can just post them here. I've been helping out with the LIRC config script. |
Author: | spalVl [ Mon Oct 17, 2005 10:38 pm ] |
Post subject: | |
Leadtek Winfast Remote RM-0010 (Bundled with Winfast TV2000 XP Deluxe TV tuner). Using Knoppmyth R5A16 /usr/local/bin/lirc-reconfig.sh (Reconfigure for WinFast reciever) Copy self made lircrc to /home/mythtv/.mythtv/lircrc (remote button bind definition file) Copy /etc/lirc/leadtek/lircd.conf.RM-0010 to /etc/lircd.conf (Remote keycode definition file) lircrc: ------------ begin prog = mythtv button = 1 config = 1 end begin prog = mythtv button = 2 config = 2 end begin prog = mythtv button = 3 config = 3 end begin prog = mythtv button = 4 config = 4 end begin prog = mythtv button = 5 config = 5 end begin prog = mythtv button = 6 config = 6 end begin prog = mythtv button = 7 config = 7 end begin prog = mythtv button = 8 config = 8 end begin prog = mythtv button = 9 config = 9 end begin prog = mythtv button = 0 config = 0 end begin prog = mythtv # Enter button button = ENTER config = Return end begin prog = mythtv button = CC config = T end begin prog = mythtv button = POWER config = Esc end begin prog = mythtv # Middle button on the diamond button = FULLSCREEN config = Return end begin prog = mythtv button = CH_UP config = Up end begin prog = mythtv button = CH_DOWN config = Down end begin prog = mythtv button = VOL_DOWN config = Left end begin prog = mythtv button = VOL_UP config = Right end #Page Up/Down begin prog = mythtv button = SLEEP config = PgUp end begin prog = mythtv button = BOSS_KEY config = PgDown end begin prog = mythtv # Use it as a volume key button = FINE_DOWN repeat = 3 config = F10 end begin prog = mythtv # Use it as a volume key button = FINE_UP repeat = 3 config = F11 end begin prog = mythtv button = MUTE config = F9 end begin prog = mythtv button = BACK config = < end begin prog = mythtv button = NEXT config = > end begin prog = mythtv button = BACK config = Left end begin prog = mythtv button = NEXT config = Right end begin prog = mythtv button = REC config = R end begin prog = mythtv button = STOP config = Esc end begin prog = mythtv button = PLAY config = P end begin prog = mythtv # We'll use it for "Delete" button = Red config = . end begin prog = mythtv button = SNAPSHOT # Use for backwards commercial skip config = Q end begin prog = mythtv button = TIMESHIFT # Use for forward commercial skip config = Z end begin prog = mythtv # Change focus for PiP (to change channel in the other window) button = RECALL config = B end begin prog = mythtv # Toggle PiP on/off button = PIP config = V end begin prog = mythtv #Switch Inputs button = VIDEO config = C end begin prog = mythtv button = MTS config = M end begin prog = mythtv button = TV/FM config = S end begin prog = mythtv # We'll use it for "Information" button = DISPLAY config = I end #Mplayer begin prog = mplayer button = PLAY config = pause end begin prog = mplayer button = STOP config = quit end begin prog = mplayer button = POWER config = quit end begin prog = mplayer button = MUTE config = mute end begin prog = mplayer button = ENTER repeat = 6 config = seek -10 end begin prog = mplayer button = RECALL repeat = 6 config = seek 10 end begin prog = mplayer button = BACK repeat = 6 config = seek -70 end begin prog = mplayer button = NEXT repeat = 6 config = seek 70 end begin prog = mplayer button = FINE_DOWN repeat = 6 config = volume -1 end begin prog = mplayer button = FINE_UP repeat = 6 config = volume 1 end #Xine begin prog = xine button = PLAY config = Play end begin prog = xine button = STOP config = Stop end begin prog = xine button = POWER config = Quit end begin prog = xine button = REC config = Pause end begin prog = xine button = CH_UP repeat = 4 config = EventUp end begin prog = xine button = CH_DOWN repeat = 4 config = EventDown end begin prog = xine button = VOL_DOWN repeat = 4 config = EventLeft end begin prog = xine button = VOL_UP repeat = 4 config = EventRight end begin prog = xine button = FULLSCREEN repeat = 0 config = EventSelect end begin prog = xine button = DISPLAY repeat = 0 config = Menu end #vol down begin prog = xine button = FINE_DOWN repeat = 1 config = Volume- end #vol up begin prog = xine button = FINE_UP repeat = 1 config = Volume+ end begin prog = xine button = PIP repeat = 1 config = ZoomIn end begin prog = xine button = RECALL repeat = 1 config = ZoomOut end #skip chapter forward begin prog = xine button = NEXT repeat = 1 config = EventNext end #skip chapter backward begin prog = xine button = BACK repeat = 1 config = EventPrior end begin prog = xine button = BLUE repeat = 2 config = SeekRelative+45 end begin prog = xine button = RED repeat = 2 config = SeekRelative-45 end ------------- Check out Leaktek_Winfast.jpg in below link for visual representation of keymappings. http://mikenet.iwarp.com/MythTV/WinFast_TV_2000_dlx |
Author: | cesman [ Mon Oct 17, 2005 10:56 pm ] |
Post subject: | |
Nice work! |
Author: | capndan [ Tue Oct 18, 2005 5:40 am ] |
Post subject: | |
I dont suppose anyone could do something like that for the ATI remote wonder could they? Or at least point me to a list of the buttons and the resulting input (I followed another guide to tweak the buttons some to get it working with MythTV but all the commands are like Button 221 or Button 157 so I have no idea which is which, making it awfully hard to set the remote up the way I like it). |
Author: | Greg Frost [ Tue Oct 18, 2005 5:35 pm ] |
Post subject: | |
You should be able to run irw and then press buttons on your remote and see what the button name is from lirc's point of view. |
Author: | cesman [ Tue Oct 18, 2005 6:05 pm ] |
Post subject: | |
That is if he is using LIRC and not the kernel module. The next release will support either. If you search the forum, you find a few templates that show the same thing for the ATi. |
Author: | Human [ Tue Oct 18, 2005 6:24 pm ] |
Post subject: | |
capndan wrote: I dont suppose anyone could do something like that for the ATI remote wonder could they?
As cesman alluded, there are two ways to support the Remote Wonder - one is by editing the kernel module, and the other is via LIRC. The next release supports it better in the kernel module, using intutive mappings for the major functions and less-intuitive but ergonomically-positioned button mappings for other functions. ati_remote.c is fairly well-commented, so if you wanted to make your own version of it on your box, you're free to do so. The new default will be quite usable, however. |
Author: | wififun [ Sun Oct 23, 2005 10:49 am ] |
Post subject: | |
I noticed that the upgrade for 22, when selecting the Silver remote, did not have any config files for it. Attached is my lircd.conf for this remote. I can post my lircrc, but it includes other items and mappings for xine. Code: # this config file was automatically generated
# using lirc-0.7.0(any) on Sun Nov 28 20:25:09 2004 # brand: Hauppauge 350 SILVER # model no. of remote control: Hauppauge A415-HPG # devices being controlled by this remote: PVR-350 begin remote name Hauppauge_350 bits 13 flags RC5|CONST_LENGTH eps 30 aeps 100 one 969 811 zero 969 811 plead 1097 gap 114605 toggle_bit 2 begin codes Go 0x00000000000017BB Power 0x00000000000017BD TV 0x000000000000179C Videos 0x0000000000001798 Music 0x0000000000001799 Pictures 0x000000000000179A Guide 0x000000000000179B Radio 0x000000000000178C Up 0x0000000000001794 Left 0x0000000000001796 Right 0x0000000000001797 Down 0x0000000000001795 OK 0x00000000000017A5 Back-Exit 0x000000000000179F Menu 0x000000000000178D Vol+ 0x0000000000001790 Vol- 0x0000000000001791 PrevCh 0x0000000000001792 Mute 0x000000000000178F Ch+ 0x00000000000017A0 Ch- 0x00000000000017A1 Record 0x00000000000017B7 Stop 0x00000000000017B6 Rewind 0x00000000000017B2 Play 0x00000000000017B5 Forward 0x00000000000017B4 SkipBackward 0x00000000000017A4 Pause 0x00000000000017B0 SkipForward 0x000000000000179E 1 0x0000000000001781 2 0x0000000000001782 3 0x0000000000001783 4 0x0000000000001784 5 0x0000000000001785 6 0x0000000000001786 7 0x0000000000001787 8 0x0000000000001788 9 0x0000000000001789 Asterix 0x000000000000178A 0 0x0000000000001780 No 0x000000000000178E Red 0x000000000000178B Green 0x00000000000017AE Yellow 0x00000000000017B8 Blue 0x00000000000017A9 end codes end remote |
Author: | tjc [ Sun Oct 23, 2005 11:42 am ] |
Post subject: | |
Saw a complaint about that during the install but the remote works anyway... Oh well... |
Page 2 of 4 | All times are UTC - 6 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |