LinHES Forums http://forums.linhes.org/ |
|
Remotes http://forums.linhes.org/viewtopic.php?f=6&t=6232 |
Page 4 of 4 |
Author: | dardack [ Wed Feb 01, 2006 7:25 am ] |
Post subject: | |
Cecil, Ok i use the one for all urc-3021b00. I have two. One i use with the hauppage receiver, and one with a serial reciever. The serial reciever lircd.conf is a bit different from the hauppage receiver one. It took a bit to get the serial to work. For some reason the auto script didn't work. I had to manually compile lirc. I also had to remove the /dev/lirc files that knoppmyth had created. I've attached the two lircd.conf files and the one lircrc file i use, i don't know your email address to email them. If someone could point that out to me i would send them. hauppauge receiver one: Code: #lircd-hauppauge reciever # Please make this file available to others # by sending it to <lirc@bartelmus.de> # # this config file was automatically generated # using lirc-0.7.0pre4(hauppauge) on Fri Jul 2 18:31:00 2004 # # contributed by # # brand: my # model no. of remote control: # devices being controlled by this remote: # begin remote name my bits 13 eps 30 aeps 100 one 0 0 zero 0 0 gap 199980 toggle_bit 2 begin codes 1 0x0000000000001941 2 0x0000000000001142 3 0x0000000000001943 4 0x0000000000001144 5 0x0000000000001945 6 0x0000000000001146 7 0x0000000000001947 8 0x0000000000001148 9 0x0000000000001949 0 0x0000000000001140 TV/VID 0x000000000000197E Enter 0x0000000000001948 Guide 0x0000000000000145 Menu 0x000000000000195D Info 0x000000000000117C Exit 0x0000000000001971 RightArrow 0x0000000000000156 LeftArrow 0x0000000000000155 UpArrow 0x0000000000001960 DownArrow 0x0000000000001961 Select 0x000000000000114B ChUp 0x0000000000001960 ChDown 0x0000000000001961 SubTitle 0x0000000000001163 Mute 0x000000000000114D VolUp 0x0000000000001150 VolDown 0x0000000000001151 Rew 0x0000000000001172 Play 0x0000000000001975 Fwd 0x0000000000001174 SkipR 0x0000000000000971 Pause 0x0000000000001169 SkipF 0x0000000000000970 Rec 0x0000000000001177 Stop 0x0000000000001976 Sleep 0x0000000000001166 Last 0x0000000000000019 end codes end remote serial receiver one Code: # Please make this file available to others # by sending it to <lirc@bartelmus.de> # # this config file was automatically generated # using lirc-0.7.0pre4(hauppauge) on Fri Jul 2 18:31:00 2004 # # contributed by # # brand: my # model no. of remote control: # devices being controlled by this remote: # begin remote name my bits 13 flags RC5|CONST_LENGTH eps 30 aeps 100 one 880 889 zero 880 889 plead 1008 gap 113802 min_repeat 3 toggle_bit 2 begin codes 1 0x1941 2 0x0000000000001142 3 0x0000000000001943 4 0x0000000000001144 5 0x0000000000001945 6 0x0000000000001146 7 0x0000000000001947 8 0x0000000000001148 9 0x0000000000001949 0 0x0000000000001140 TV/VID 0x000000000000197E Enter 0x0000000000001948 Guide 0x0000000000000145 Menu 0x000000000000195D Info 0x000000000000117C Exit 0x0000000000001971 RightArrow 0x0000000000000156 LeftArrow 0x0000000000000155 UpArrow 0x0000000000001960 DownArrow 0x0000000000001961 Select 0x000000000000114B ChUp 0x0000000000001960 ChDown 0x0000000000001961 SubTitle 0x0000000000001163 Mute 0x000000000000114D VolUp 0x0000000000001150 VolDown 0x0000000000001151 Rew 0x0000000000001172 Play 0x0000000000001975 Fwd 0x0000000000001174 SkipR 0x0000000000000971 Pause 0x0000000000001169 SkipF 0x0000000000000970 Rec 0x0000000000001177 Stop 0x0000000000001976 Sleep 0x0000000000001166 Last 0x0000000000000019 end codes end remote now my lircrc file: Code: # My lircrc file for a urc-3021b00 remote
begin prog = mythtv button = Enter config = w end begin prog = mythtv button = TV/VID config = F end begin prog = mythtv button = 1 config = 1 repeat = 3 end begin prog = mythtv button = 2 config = 2 repeat = 3 end begin prog = mythtv button = 3 config = 3 repeat = 3 end begin prog = mythtv button = 4 config = 4 repeat = 3 end begin prog = mythtv button = 5 config = 5 repeat = 3 end begin prog = mythtv button = 6 config = 6 repeat = 3 end begin prog = mythtv button = 7 config = 7 repeat = 3 end begin prog = mythtv button = 8 config = 8 repeat = 3 end begin prog = mythtv button = 9 config = 9 repeat = 3 end begin prog = mythtv button = Exit config = Esc end begin prog = mythtv button = 0 config = 0 repeat = 3 end begin prog = mythtv button = Menu config = M end begin prog = mythtv button = Guide config = I end begin prog = mythtv button = Info config = O end begin prog = mythtv button = VolDown repeat = 3 config = F10 end begin prog = mythtv button = VolUp repeat = 3 config = F11 end begin prog = mythtv button = ChUp repeat = 3 config = Up end begin prog = mythtv button = UpArrow repeat = 3 config = Up end begin prog = mythtv button = ChDown repeat = 3 config = Down end begin prog = mythtv button = DownArrow repeat = 3 config = Down end begin prog = mythtv button = LeftArrow repeat = 3 config = Left end begin prog = mythtv button = RightArrow repeat = 3 config = Right end begin prog = mythtv button = Select config = Space repeat = 3 end begin prog = mythtv button = Mute config = F9 repeat = 3 end begin prog = mythtv button = Last config = H end begin prog = mythtv button = Subtitle config = X end begin prog = mythtv button = Rew config = < end begin prog = mythtv button = Play config = P end begin prog = mythtv button = Fwd config = > end begin prog = mythtv button = Rec config = r end begin prog = mythtv # Teletext button = Stop config = Esc end begin prog = mythtv button = Pause config = P end begin prog = mythtv button = SkipR # Use for backwards commercial skip config = PgUp end begin prog = mythtv button = SkipF # Use for forward commercial skip config = PgDown end begin prog = mythtv button = Sleep config = ? end #Xine begin prog = xine button = Exit config = Quit end begin prog = xine button = TV/VID config = SaturationControl+ end begin prog = xine button = Stop config = ContrastControl+ end begin prog = xine button = SubTitle config = SaturationControl- end begin prog = xine button = Sleep config = ContrastControl- end begin prog = xine button = Info config = ToggleAspectRatio end begin prog = xine button = Play config = Play end begin prog = xine button = Pause config = Pause end begin prog = xine button = UpArrow config = EventUp end begin prog = xine button = DownArrow config = EventDown end begin prog = xine button = LeftArrow config = EventLeft end begin prog = xine button = RightArrow config = EventRight end begin prog = xine button = Select config = EventSelect end begin prog = xine button = Guide config = Menu end begin prog = xine button = VolUp config = Volume+ end begin prog = xine button = VolDown config = Volume- end begin prog = xine button = Mute config = Mute end begin prog = xine button = 0 config = Number0 end begin prog = xine button = 1 config = Number1 end begin prog = xine button = 2 config = Number2 end begin prog = xine button = 3 config = Number3 end begin prog = xine button = 4 config = Number4 end begin prog = xine button = 5 config = Number5 end begin prog = xine button = 6 config = Number6 end begin prog = xine button = 7 config = Number7 end begin prog = xine button = 8 config = Number8 end begin prog = xine button = 9 config = Number9 end begin prog = xine button = Fwd config = SeekRelative+30 end begin prog = xine button = Rew config = SeekRelative-30 end begin prog = xine button = SkipF config = EventNext end begin prog = xine button = SkipR config = EventPrior end begin prog = xine button = Info config = OSDStreamInfos end #MPlayer begin prog = mplayer button = Exit config = quit end begin prog = mplayer button = Menu config = osd end begin prog = mplayer button = Rew config = seek -10 repeat = 1 end begin prog = mplayer button = Fwd config = seek +10 repeat = 1 end begin prog = mplayer button = SkipR config = seek -60 repeat = 1 end begin prog = mplayer button = SkipF config = seek +60 repeat = 1 end begin prog = mplayer button = Pause config = pause end begin prog = mplayer button = Play config = pause end begin prog = mplayer button = BACK config = quit end begin prog = mplayer button = VolUp config = volume +1 repeat = 1 end begin prog = mplayer button = VolDown config = volume -1 repeat = 1 end begin prog=mplayer button=Mute config=mute end |
Author: | Ralph [ Sat Feb 11, 2006 7:06 pm ] |
Post subject: | Development One Home Media Centre |
[EDIT: 4th March 2006] I have now got this remote working, but it still wouldn't surprise me if I'm the only one with this particular remote, so it's probably not worth including. [/EDIT] I don’t know if this will be of much use to many, as this remote may be rare, but I don’t know for sure. It comes supplied with this commercial mythtv implementation http://www.hmc.com.au called the “HMC.” (There is a better picture of it here, http://www.hmc.com.au/hmc/downloads/APC_review_april04.pdf (1.45MB) but I could take my own pic of it and upload it if anyone’s interested.) I don’t know if D1 (the manufacturer of the HMC myth box) commissioned its design specially, or if it’s just an adaptation of a commercially available IR remote, but anyway because the remote has been designed for mythtv it has all the ‘right’ keys and is well laid out for the purpose. Here is lircd.conf: Code: # this config file was automatically generated # using lirc-0.6.6(serial) on Thu Aug 21 15:44:07 2003 # # contributed by # # brand: Development One LDO (d1ldo) # model no. of remote control: LDO # devices being controlled by this remote: # Home Media Centre # # $Id: lircd.conf,v 1.11 2004/07/30 06:30:29 davidc Exp $ # begin remote name d1ldo bits 16 flags SPACE_ENC|CONST_LENGTH eps 30 aeps 100 header 9076 4475 one 593 1647 zero 593 532 ptrail 580 repeat 9074 2224 pre_data_bits 16 pre_data 0x10EF gap 107808 toggle_bit 0 begin codes Power 0x000000000000DA25 Open 0x000000000000FA05 1 0x000000000000EA15 2 0x000000000000F20D 3 0x000000000000CA35 4 0x0000000000006A95 5 0x000000000000728D 6 0x0000000000007A85 7 0x0000000000002AD5 8 0x00000000000032CD 9 0x0000000000003AC5 0 0x000000000000AA55 10 0x000000000000B24D Goto 0x000000000000BA45 Setup 0x000000000000E817 Ps 0x000000000000F807 ArrowUp 0x000000000000F00F ArrowDown 0x000000000000629D ArrowLeft 0x0000000000006897 ArrowRight 0x0000000000007887 OK 0x000000000000708F Title 0x0000000000005AA5 Menu 0x0000000000004AB5 Band 0x0000000000009A65 Feature 0x0000000000008A75 ChapterBack 0x000000000000A25D FastBack 0x0000000000001AE5 FastForward 0x0000000000000AF5 ChapterForward 0x000000000000E01F Play 0x00000000000022DD Subtitle 0x000000000000D827 Angle 0x000000000000C837 Slow 0x00000000000050AF Repeat 0x000000000000609F Osd 0x00000000000048B7 Function 0x00000000000012ED Program 0x00000000000002FD Mute 0x0000000000009867 Audio 0x000000000000C03F Channel 0x000000000000807F Mode 0x00000000000000FF VolumeUp 0x000000000000A857 VolumeDown 0x00000000000038C7 ChannelUp 0x000000000000D02F ChannelDown 0x00000000000010EF end codes end remote And here is lircrc: Code: #
# $Id: lircrc,v 1.17 2004/07/12 05:44:03 davidc Exp $ # ############################################################################### # # irexec: for HMC System # ############################################################################### begin prog = irexec remote = d1ldo button = Power repeat = 0 config = systemstandby.pl & end begin prog = irexec remote = d1ldo button = Open repeat = 0 config = openclosedrive & end ############################################################################### # # mythtv: for MythTV # ############################################################################### begin prog = mythtv remote = d1ldo button = 1 repeat = 4 config = 1 end begin prog = mythtv remote = d1ldo button = 2 repeat = 4 config = 2 end begin prog = mythtv remote = d1ldo button = 3 repeat = 4 config = 3 end begin prog = mythtv remote = d1ldo button = 4 repeat = 4 config = 4 end begin prog = mythtv remote = d1ldo button = 5 repeat = 4 config = 5 end begin prog = mythtv remote = d1ldo button = 6 repeat = 4 config = 6 end begin prog = mythtv remote = d1ldo button = 7 repeat = 4 config = 7 end begin prog = mythtv remote = d1ldo button = 8 repeat = 4 config = 8 end begin prog = mythtv remote = d1ldo button = 9 repeat = 4 config = 9 end begin prog = mythtv remote = d1ldo button = 0 repeat = 4 config = 0 end begin prog = mythtv remote = d1ldo button = 10 repeat = 2 config = Backspace end begin prog = mythtv remote = d1ldo button = Goto repeat = 0 config = Return end begin prog = mythtv remote = d1ldo button = Setup repeat = 0 config = Home end begin prog = mythtv remote = d1ldo button = Ps repeat = 0 config = S end begin prog = mythtv remote = d1ldo button = ArrowUp repeat = 2 config = Up end begin prog = mythtv remote = d1ldo button = ArrowDown repeat = 2 config = Down end begin prog = mythtv remote = d1ldo button = ArrowLeft repeat = 2 config = Left end begin prog = mythtv remote = d1ldo button = ArrowRight repeat = 2 config = Right end begin prog = mythtv remote = d1ldo button = OK repeat = 0 config = Return end begin prog = mythtv remote = d1ldo button = Title repeat = 0 config = E end begin prog = mythtv remote = d1ldo button = Menu repeat = 0 config = Esc end begin prog = mythtv remote = d1ldo button = Band repeat = 0 config = M end begin prog = mythtv remote = d1ldo button = Feature repeat = 0 config = I end begin prog = mythtv remote = d1ldo button = ChapterBack repeat = 2 config = ( end begin prog = mythtv remote = d1ldo button = ChapterForward repeat = 2 config = ) end begin prog = mythtv remote = d1ldo button = FastBack repeat = 2 config = < end begin prog = mythtv remote = d1ldo button = FastForward repeat = 2 config = > end begin prog = mythtv remote = d1ldo button = Play repeat = 0 config = P end begin prog = mythtv remote = d1ldo button = Subtitle repeat = 0 config = R end begin prog = mythtv remote = d1ldo button = Angle repeat = 0 config = D end begin prog = mythtv remote = d1ldo button = Slow repeat = 2 config = Z end begin prog = mythtv remote = d1ldo button = Repeat repeat = 0 config = ? end begin prog = mythtv remote = d1ldo button = Osd repeat = 2 config = W end begin prog = mythtv remote = d1ldo button = Function repeat = 0 config = C end begin prog = mythtv remote = d1ldo button = Program repeat = 0 config = / end begin prog = mythtv remote = d1ldo button = Mute repeat = 0 config = | end begin prog = mythtv remote = d1ldo button = ChannelUp repeat = 2 config = } end begin prog = mythtv remote = d1ldo button = ChannelDown repeat = 2 config = { end begin prog = mythtv remote = d1ldo button = VolumeUp repeat = 2 config = ] end begin prog = mythtv remote = d1ldo button = VolumeDown repeat = 2 config = [ end ############################################################################### # # xine: for DVD & Video playback # ############################################################################### begin prog = xine remote = d1ldo button = Open repeat = 0 config = Quit end begin prog = xine remote = d1ldo button = ArrowUp repeat = 2 config = EventUp end begin prog = xine remote = d1ldo button = ArrowDown repeat = 2 config = EventDown end begin prog = xine remote = d1ldo button = ArrowRight repeat = 2 config = EventRight end begin prog = xine remote = d1ldo button = ArrowLeft repeat = 2 config = EventLeft end begin prog = xine remote = d1ldo button = Band repeat = 0 config = TitleMenu end begin prog = xine remote = d1ldo button = OK repeat = 0 config = EventSelect end begin prog = xine remote = d1ldo button = 0 repeat = 4 config = Number0 end begin prog = xine remote = d1ldo button = 1 repeat = 4 config = Number1 end begin prog = xine remote = d1ldo button = 2 repeat = 4 config = Number2 end begin prog = xine remote = d1ldo button = 3 repeat = 4 config = Number3 end begin prog = xine remote = d1ldo button = 4 repeat = 4 config = Number4 end begin prog = xine remote = d1ldo button = 5 repeat = 4 config = Number5 end begin prog = xine remote = d1ldo button = 6 repeat = 3 config = Number6 end begin prog = xine remote = d1ldo button = 7 repeat = 4 config = Number7 end begin prog = xine remote = d1ldo button = 8 repeat = 4 config = Number8 end begin prog = xine remote = d1ldo button = 9 repeat = 4 config = Number9 end begin prog = xine remote = d1ldo button = Play repeat = 0 config = Pause end begin prog = xine remote = d1ldo button = Menu repeat = 0 config = Quit # config = Stop end begin prog = xine remote = d1ldo button = ChapterForward repeat = 2 config = NextMrl end begin prog = xine remote = d1ldo button = ChapterBack repeat = 2 config = PriorMrl end begin prog = xine remote = d1ldo button = Feature repeat = 0 config = OSDStreamInfos end begin prog = xine remote = d1ldo button = VolumeUp repeat = 2 config = Volume+ end begin prog = xine remote = d1ldo button = VolumeDown repeat = 2 config = Volume- end begin prog = xine remote = d1ldo button = Mute repeat = 0 config = Mute end begin prog = xine remote = d1ldo button = FastForward repeat = 2 config = SpeedFaster end begin prog = xine remote = d1ldo button = FastBack repeat = 2 config = SpeedSlower end begin prog = xine remote = d1ldo button = Repeat repeat = 2 config = ZoomIn end begin prog = xine remote = d1ldo button = Program repeat = 2 config = ZoomOut end begin prog = xine remote = d1ldo button = Osd repeat = 2 config = ToggleAspectRatio end begin prog = xine remote = d1ldo button = Channel repeat = 2 config = EventAngleNext # config = AngleMenu end begin prog = xine remote = d1ldo button = Audio repeat = 2 config = AudioChannelNext # config = AudioMenu end begin prog = xine remote = d1ldo button = Mode repeat = 2 config = SpuNext # config = SubPictureMenu end |
Author: | mattshaw [ Thu Feb 16, 2006 2:43 pm ] |
Post subject: | Remotes |
Hi Human/Cecil I Don't know if you are still taking input to do with remotes, but I am pretty sure a lot of users use a standard ir receiver on COM1 or COM2..... Any chances of getting these added into the install (lirc-reconfig) script ?? If you need any conf files, let me know Cheers Matt Shaw matt@shagshaw.com (Thought it was time I gave something back !!!!) (Loads more to come soon) |
Author: | afrosheen [ Thu Feb 16, 2006 7:54 pm ] |
Post subject: | |
I believe he'll be taking requests for blaster config files soon. |
Author: | aelinuxguy [ Sun Feb 19, 2006 1:54 pm ] |
Post subject: | |
I use the glorious RadioShack 15-2116. I followed this tutorial to get it working: http://wilsonet.com/mythtv/remotes.php Most of that is about programming the hardware, though. Here are the links to the lirc stuff: http://wilsonet.com/mythtv/lircd-RS.conf.txt http://wilsonet.com/mythtv/lircrc-RS.txt |
Author: | simonf [ Sun Feb 19, 2006 2:04 pm ] |
Post subject: | MCE Remote V2 UK Version |
Hi All Please find attatched an edited lirc file for the UK version P/N X8000683-115 usb MCE Remote. Code: # # RC-6 config file # # source: http://home.hccnet.nl/m.majoor/projects__remote_control.htm # http://home.hccnet.nl/m.majoor/pronto.pdf # # used by: Philips # ######### # # Philips Media Center Edition remote control # For use with the USB MCE ir receiver # # Dan Conti dconti|acm.wwu.edu # # Radio, Print, RecTV are only available on the HP Media Center remote control # begin remote name mceusb bits 16 flags RC6|CONST_LENGTH eps 30 aeps 100 header 2667 889 one 444 444 zero 444 444 pre_data_bits 21 pre_data 0x37FF0 gap 105000 toggle_bit 22 rc6_mask 0x100000000 begin codes # starts at af Radio 0x00007baf Print 0x00007bb1 Videos 0x00007bb5 Pictures 0x00007bb6 RecTV 0x00007bb7 Music 0x00007bb8 TV 0x00007bb9 # no ba - d8 Guide 0x00007bd9 LiveTV 0x00007bda DVD 0x00007bdb Back 0x00007bdc OK 0x00007bdd Right 0x00007bde Left 0x00007bdf Down 0x00007be0 Up 0x00007be1 Star 0x00007be2 Hash 0x00007be3 Replay 0x00007be4 Skip 0x00007be5 Stop 0x00007be6 Pause 0x00007be7 Record 0x00007be8 Play 0x00007be9 Rewind 0x00007bea Forward 0x00007beb ChanDown 0x00007bec ChanUp 0x00007bed VolDown 0x00007bee VolUp 0x00007bef More 0x00007bf0 Mute 0x00007bf1 Home 0x00007bf2 Power 0x00007bf3 Enter 0x00007bf4 Clear 0x00007bf5 Nine 0x00007bf6 Eight 0x00007bf7 Seven 0x00007bf8 Six 0x00007bf9 Five 0x00007bfa Four 0x00007bfb Three 0x00007bfc Two 0x00007bfd One 0x00007bfe Zero 0x00007bff tv 0x00007B9A red 0x00007BA4 green 0x00007BA3 yellow 0x00007BA2 blue 0x00007BA1 teletext 0x00007BA5 end codes end remote Please note the UK version of the remote has red,green,blue,yellow,teletext,star and hash keys extra. Code: ##############################################################################
# SimonF for MCE Remote # mythtv: for MythTV # Mythtv xine and mplayer ############################################################################### begin prog = irexec button = blue repeat = 4 config = sudo eject & end ############################# begin prog = mythtv button = One repeat = 4 config = 1 end begin prog = mythtv button = Two repeat = 4 config = 2 end begin prog = mythtv button = Three repeat = 4 config = 3 end begin prog = mythtv button = Four repeat = 4 config = 4 end begin prog = mythtv button = Five repeat = 4 config = 5 end begin prog = mythtv button = Six repeat = 4 config = 6 end begin prog = mythtv button = Seven repeat = 4 config = 7 end begin prog = mythtv button = Eight repeat = 4 config = 8 end begin prog = mythtv button = Nine repeat = 4 config = 9 end begin prog = mythtv button = Zero repeat = 4 config = 0 end begin prog = mythtv #Clear On Screen Display button = clear repeat = 4 config = Backspace end begin prog = mythtv #Program Guide button = Guide repeat = 4 config = S end begin prog = mythtv button = Up repeat = 6 config = Up end begin prog = mythtv button = Down repeat = 6 config = Down end begin prog = mythtv button = Left repeat = 6 config = Left end begin prog = mythtv button = Right repeat = 6 config = Right end begin prog = mythtv #Select button = OK repeat = 6 config = Return end begin prog = mythtv #enter Edit Mode button = tv repeat = 4 config = E end begin prog = mythtv # Exit Progam button = Back repeat = 4 config = Esc end begin prog = mythtv #Bring up menu Button Marked DVD Guide button = DVD repeat = 4 config = M end begin prog = mythtv # Bring Up Info button = Home repeat = 4 config = W end begin prog = mythtv # Bring Up Program Info button = More repeat = 4 config = U end begin prog = mythtv button = Replay repeat = 4 config = Home end begin prog = mythtv button = Skip repeat = 4 config = End end begin prog = mythtv button = Rewind repeat = 4 config = PgUp end begin prog = mythtv button = Forward repeat = 4 config = PgDown end begin prog = mythtv button = Play repeat = 4 config = P end begin prog = mythtv button = Record repeat = 4 config = R end begin prog = mythtv button = Power repeat = 4 config = D end begin prog = mythtv button = teletext repeat = 4 config = F4 end begin prog = mythtv button = LiveTV repeat = 4 config = F5 end begin prog = mythtv button = RecTV repeat = 4 config = F6 end #begin #prog = mythtv #button = Slow #repeat = 4 #config = Z #end #begin #prog = mythtv #remote = d1ldo #button = Repeat #repeat = 0 #config = ? #end #begin #prog = mythtv #remote = d1ldo #button = Osd #repeat = 2 #config = W #end #begin #prog = mythtv #remote = d1ldo #button = Function #repeat = 0 #config = C #end #begin #prog = mythtv #remote = d1ldo #button = Program #repeat = 0 #config = / #end begin prog = mythtv button = Mute repeat = 0 config = | end begin prog = mythtv button = ChanUp repeat = 2 config = } end begin prog = mythtv button = ChanDown repeat = 2 config = { end begin prog = mythtv button = VolUp repeat = 2 config = ] end begin prog = mythtv button = VolDown repeat = 2 config = [ end begin prog = mythtv button = red repeat = 2 config = F1 end ############################################################################### # # xine: for DVD & Video playback # ############################################################################### begin prog = xine button = Back repeat = 0 config = Quit end begin prog = xine button = Up repeat = 2 config = EventUp end begin prog = xine button = Down repeat = 2 config = EventDown end begin prog = xine button = Right repeat = 2 config = EventRight end begin prog = xine button = Left repeat = 2 config = EventLeft end begin prog = xine button = DVD repeat = 0 config = TitleMenu end begin prog = xine button = OK repeat = 0 config = EventSelect end begin prog = xine button = Zero repeat = 4 config = Number0 end begin prog = xine button = One repeat = 4 config = Number1 end begin prog = xine button = Two repeat = 4 config = Number2 end begin prog = xine button = Three repeat = 4 config = Number3 end begin prog = xine button = Four repeat = 4 config = Number4 end begin prog = xine button = Five repeat = 4 config = Number5 end begin prog = xine button = Six repeat = 3 config = Number6 end begin prog = xine button = Seven repeat = 4 config = Number7 end begin prog = xine button = Eight repeat = 4 config = Number8 end begin prog = xine button = Nine repeat = 4 config = Number9 end begin prog = xine button = Play repeat = 0 config = Pause end begin prog = xine button = Stop repeat = 0 config = Quit # config = Stop end begin prog = xine button = Skip repeat = 2 config = NextMrl end begin prog = xine button = Replay repeat = 2 config = PriorMrl end begin prog = xine button = More repeat = 0 config = OSDStreamInfos end begin prog = xine button = VolUp repeat = 2 config = Volume+ end begin prog = xine button = VolDown repeat = 2 config = Volume- end begin prog = xine button = Mute repeat = 0 config = Mute end begin prog = xine button = Forward repeat = 2 config = SpeedFaster end begin prog = xine remote = d1ldo button = Rewind repeat = 2 config = SpeedSlower end begin prog = xine button = hash repeat = 2 config = ZoomIn end begin prog = xine button = star repeat = 2 config = ZoomOut end begin prog = xine button = Home repeat = 2 config = ToggleAspectRatio end begin prog = xine button = ChanUp repeat = 2 config = EventAngleNext # config = AngleMenu end begin prog = xine button = ChanDown repeat = 2 config = AudioChannelNext # config = AudioMenu end #begin #prog = xine #remote = d1ldo #button = Mode #repeat = 2 #config = SpuNext # config = SubPictureMenu #end #MPlayer begin prog = mplayer button = Stop config = quit end begin prog = mplayer button = DVD config = osd end begin prog = mplayer button = Rewind config = seek -10 repeat = 1 end begin prog = mplayer button = Forward config = seek +10 repeat = 1 end begin prog = mplayer button = Replay config = seek -60 repeat = 1 end begin prog = mplayer button = Skip config = seek +60 repeat = 1 end begin prog = mplayer button = Pause config = pause end begin prog = mplayer button = Play config = pause end begin prog = mplayer button = Back config = quit end begin prog = mplayer button = VolUp config = volume +1 repeat = 1 end begin prog = mplayer button = VolDown config = volume -1 repeat = 1 end begin prog=mplayer button=Mute config=mute end I edited some previous posts to get here, tride to add a button to open the drive door with no success, someone may be able to tell me where i went wrong? other than that it works well and seems to be girlfriend proof!. |
Author: | pwood999 [ Tue Feb 28, 2006 10:01 am ] |
Post subject: | |
Cecil, I have just sent my lircd.conf & lircrc to you via email as requested in the top post. Also, if anybody can help, I have a few questions on getting my serial remote working after upgrading R4V5 to R5A30.2 1) Which of the options in lirc-reconfig.sh might apply to remotes using lirc_serial ? 2) Where should I put my config files to make then usable by this script ? 3) I can get lircd to run manually and then the remote works ok, but the procedure I did last time to get it to run at boot doesn't seem to work. What's the best place to run lircd at boot ? Rgds, Pete[/b] |
Author: | Ralph [ Fri Mar 03, 2006 5:42 am ] |
Post subject: | |
Pete, I'm also interested in answers to the questions you raised above - perhaps would you repost to either 'KnoppMyth - Usage/HowTo' or 'Linux - MythTV' as this thread isn't really for discussion. |
Author: | khrusher [ Fri Mar 03, 2006 8:21 am ] |
Post subject: | |
if you are having issues with lirc_serial, you may want to read through this thread. I had issues with lirc_serial and the new kernel. Not sure how wide spread the issues is (maybe specific to my hardware) but several others has the same issue. Check dmesg for the BUG listed to see if you are tripping over the same issue. http://mysettopbox.tv/phpBB2/viewtopic.php?t=4743 |
Author: | esherm22 [ Fri Mar 10, 2006 6:59 am ] |
Post subject: | |
Here are mine for the packard bell remote. Thanks to mbrennek! begin remote name PackBell bits 15 flags SPACE_ENC|CONST_LENGTH eps 30 aeps 100 header 9065 4500 one 597 532 zero 597 1643 ptrail 597 pre_data_bits 16 pre_data 0xF708 post_data_bits 1 post_data 0x0 gap 107000 repeat_bit 0 repeat 9050 2250 begin codes Help 0x0000000000006F90 Phone 0x0000000000004FB0 Message 0x0000000000006E91 SRS 0x0000000000004EB1 CD 0x0000000000002FD0 Aux1 0x0000000000000FF0 Aux2 0x0000000000002ED1 Aux3 0x0000000000000EF1 LMB 0x00000000000023DC RMB 0x000000000000639C Up 0x00000000000037C8 Down 0x00000000000057A8 Left 0x0000000000007788 Right 0x00000000000017E8 Menu 0x0000000000007B84 Mute 0x0000000000003BC4 Enter 0x00000000000047B8 CHUp 0x00000000000027D8 CHDown 0x0000000000006798 VolUp 0x0000000000005BA4 VolDown 0x0000000000001BE4 Display 0x00000000000007F8 One 0x0000000000005EA1 Two 0x0000000000001EE1 Three 0x0000000000000BF4 Four 0x0000000000007E81 Five 0x0000000000003EC1 Six 0x0000000000004BB4 Seven 0x0000000000005FA0 Eight 0x0000000000001FE0 Nine 0x0000000000002BD4 Zero 0x0000000000003FC0 Star 0x0000000000007F80 Hash 0x0000000000006B94 end codes end remote ******************************** begin prog = mythtv button = CHUp repeat = 3 config = Up end begin prog = mythtv button = CHDown repeat = 3 config = Down end begin prog = mythtv button = VolUp repeat = 3 config = F11 end begin prog = mythtv button = VolDown repeat = 3 config = F10 end begin prog = mythtv button = Display config = Esc end begin prog = mythtv button = Menu config = M end begin prog = mythtv button = Up config = Up repeat = 3 end begin prog = mythtv button = Right config = Right repeat = 3 end begin prog = mythtv button = Down config = Down repeat = 3 end begin prog = mythtv button = Left config = Left repeat = 3 end begin prog = mythtv button = Enter config = Return end begin prog = mythtv button = Zero config = 0 end begin prog = mythtv button = One config = 1 end begin prog = mythtv button = Two config = 2 end begin prog = mythtv button = Three config = 3 end begin prog = mythtv button = Four config = 4 end begin prog = mythtv button = Five config = 5 end begin prog = mythtv button = Six config = 6 end begin prog = mythtv button = Seven config = 7 end begin prog = mythtv button = Eight config = 8 end begin prog = mythtv button = Nine config = 9 end begin prog = mythtv button = Star config = P end begin prog = mythtv button = Help config = I end begin prog = mythtv button = Hash config = P end begin prog = mythtv button = Mute config = F9 end begin prog = mythtv button = LMB config = Q end begin prog = mythtv button = RMB config = Z end |
Author: | JimKusz [ Mon Mar 13, 2006 11:09 pm ] |
Post subject: | Serial Homebrew Remote |
Hi: I use the homebrew serial remote with a custom lircd.conf for a re-used DSS remote. I don't expect "default" support for my remote, as it is quite custom. What I would like to ask for is: 1) some way in the init scripts to setserial <serial_port> none so that lirc can open it. I had to modify /etc/init.d/lirc manually and insert the setserial line right before it loaded the modules; 2) a "serial with custom remote" option where the lirc framework and the above option will be activated for serial recievers. This option can either prompt for the filename to copy over as the lircd.conf or just expect the user to copy it over themselves (after all, if they're choosing the "custom" option, they should know how to customize it ) 3) It would be really, really nice if the knoppmyth backup option would save all the relevant remote information (reguardless of what remote is chosen) to make upgrades smoother. (somewhat relevant) 4) I also make use of irexec. While the binary is in there, I had to hack around a bit to find the "right" place to set it up to auto-start (and I'm still not sure I did it properly). Maby it makes sese to do something like grep the lircrc file for "irexec" and if found, start it on login/session start. I really like the idea behind knoppmyth's upgrade method (backup, rewrite everything, restore). It really makes it much easier to maintain, and makes it more livable for me to set up for my parents knowing they have an automated rebuild method avaiable. Unfortunately, I find there's several low-level customizations I have to do to make my system work (mostly with the remote, but also with the volume); on another system, the serial control program for the DSS reciever). It would be really nice if there was some way I could set this up initially such that the backup will backup and restore them with a knoppmyth upgrade. ------------------ Remote specific information: The remote here is the hmrc-5, the standard remote controll that shipped with second-generation Hughes DSS systems. It is a multi-function remote with "sat" "tv" "vcr" and "aux" accross the top. By default, if sat is selected, the normal sat menu buttons, chan up/down, and the number keys map to the Sat function, volume and mute will map to TV (without changing modes), and the play/stop/ff/rw/etc buttons at the bottom will map to the "vcr" option without changing modes manually. Since this is a programmable remote, I programmed all modes to "008" -- INCLUDING SAT. This makes sure that I don't accidentally start controlling the sat system, and that a partially-configured remote doesn't control the myth system "half way". To program the remote, hold down the mode button and press "mute". The mode button should lite solid. Now type in the 3-digit code ("008"), then press the mode button again. Repeat for other modes. (note: AUX is not used, as it overides all keys, but is not defined for all keys so its pretty useless generally speaking). Code: # brand: hrmc5-008.conf # model no. of remote control: # devices being controlled by this remote: # begin remote name hrmc5-008.conf bits 32 flags SPACE_ENC|CONST_LENGTH eps 30 aeps 100 header 9032 4427 one 620 1634 zero 620 489 ptrail 621 repeat 9033 2180 gap 108287 toggle_bit 0 begin codes Power 0x00000000A2A0A956 Action 0x00000000A2A0718E Info 0x00000000A2A0C936 Guide 0x00000000A2A049B6 Exit 0x00000000A2A0F10E Fav 0x00000000A2A08976 Up 0x00000000A2A09966 Down 0x00000000A2A009F6 Left 0x00000000A2A029D6 Right 0x00000000A2A0E916 Select 0x00000000A2A019E6 ChUp 0x00000000A2A041BE ChDown 0x00000000A2A0C13E PrevCh 0x00000000A2A06996 VolUp 0x0000000008F748B7 VolDown 0x0000000008F750AF Mute 0x0000000008F7906F 1 0x00000000A2A0A15E 2 0x00000000A2A0619E 3 0x00000000A2A0E11E 4 0x00000000A2A011EE 5 0x00000000A2A0916E 6 0x00000000A2A051AE 7 0x00000000A2A0D12E 8 0x00000000A2A031CE 9 0x00000000A2A0B14E 0 0x00000000A2A021DE Input 0x00000000A2A0817E Alpha 0x00000000A2A0AF50 Rew 0x000000009669906F Play 0x00000000966900FF FF 0x00000000966910EF Rec 0x000000009669807F Stop 0x00000000966950AF Pause 0x000000009669D02F end codes end remote And my .lircrc: Code: # Save this file in ~/.mythtv/lircrc
begin prog = mythtv button = Exit config = Esc end begin prog = mythtv button = 1 config = 1 end begin prog = mythtv button = 2 config = 2 end begin prog = mythtv button = 3 config = 3 end begin prog = mythtv button = 4 config = 4 end begin prog = mythtv button = 5 config = 5 end begin prog = mythtv button = 6 config = 6 end begin prog = mythtv button = 7 config = 7 end begin prog = mythtv button = 8 config = 8 end begin prog = mythtv button = 9 config = 9 end begin prog = mythtv button = 0 config = 0 end begin prog = mythtv # "action then guide"; labled on remote as "menu" button = Action button = Guide config = M end begin prog = mythtv button = Guide config = S #Jumps directly to guide while watching tv end # Below are keys used with the Hauppauge Grey remote begin prog = mythtv # Action then "stop". Not labled as delete but nothing else seems reasonable... button = Action button = Stop config = D end begin prog = mythtv # This is the Info key # We'll use it for "Information" button = Info config = I end # Note the "repeat =" strings in the volume and channel. # This means that if you hold down the key, every nth instance will be # passed. This depends on your system, so you may want to increase or # decrease this and see what happens. repeat = 1 is probably too # fast. begin prog = irexec # Use it as a volume key button = VolDown repeat = 3 config = /usr/bin/volume.sh down & end begin prog = irexec # Use it as a volume key button = VolUp repeat = 3 config = /usr/bin/volume.sh up & end begin prog = mythtv button = ChUp # This is the "up" on the central diamond repeat = 3 config = PgUp end begin prog = mythtv button = ChDown # This is the "down" on the central diamond repeat = 3 config = PgDown end begin prog = mythtv button = Left repeat = 3 config = Left end begin prog = mythtv button = Right repeat = 3 config = Right end begin prog = mythtv button = Up repeat = 3 config = Up end begin prog = mythtv button = Down repeat = 3 config = Down end begin prog = mythtv button = Select config = Return end begin prog = mythtv button = Mute config = F9 end begin prog = mythtv button = Play config = P end begin prog = mythtv button = Rec config = R end begin prog = mythtv button = Pause config = P end begin prog = mythtv button = Rew repeat = 3 config = Left end begin prog = mythtv button = FF repeat = 3 config = Right end begin prog = mythtv button = Action button = Rew # Use for backwards commercial skip config = Q end begin prog = mythtv button = Action button = FF # Use for forward commercial skip config = Z end begin prog = mythtv button = Stop config = O end # There's no good way to deal with these buttons.... begin prog = mythtv button = Action button = Left repeat = 3 config = Del end begin prog = mythtv button = Action button = Right config = Tab end # Power Button (resets frontend; recovers from frozen) begin prog = irexec button = Power config = /usr/bin/mythpowerbutton.sh end ##### ##### Media Players Setup ##### ### MPlayer lirc setup # Show OSD begin prog = mplayer button = Menu config = osd end # Pause playback begin prog = mplayer button = Pause config = pause end # Skip ahead a minute if playing # If paused, resume playing begin prog = mplayer button = Play config = seek +1 end # Stop playback and exit begin prog = mplayer button = Stop config = quit end # Mute begin prog = mplayer button = Mute config = mute end # Seek back 10 seconds begin prog = mplayer button = Rew config = seek -10 end # Seek forward 30 seconds begin prog = mplayer button = FF config = seek +30 end # Quit begin prog = mplayer button = Exit config = quit end # Seek forward 10 minutes #begin #prog = mplayer #button = ???? # #config = seek +600 #end # Seek backward 10 minutes #begin #prog = mplayer #button = ???? # #config = seek -600 #end # Toggle full-screen #begin #prog = mplayer #button = FULL # #config = vo_fullscreen #end ### Xine lirc setup begin prog = xine button = Play config = Play end begin prog = xine button = Stop config = Stop end begin prog = xine button = Exit config = Quit end begin prog = xine button = Pause config = Pause end begin prog = xine button = Up config = EventUp end begin prog = xine button = Down config = EventDown end begin prog = xine button = Left config = EventLeft end begin prog = xine button = Right config = EventRight end begin prog = xine button = Select config = EventSelect end begin prog = xine button = Guide config = Menu end begin prog = xine button = Action button = Guide config = RootMenu end begin prog = xine button = FF config = SpeedFaster end begin prog = xine button = Rew config = SpeedSlower end begin prog = xine button = VolUp config = Volume+ end begin prog = xine button = VolDown config = Volume- end begin prog = xine button = Mute config = Mute end begin prog = xine button = Action button = FF config = EventNext end begin prog = xine button = Action button = Rew config = EventPrior end begin prog = xine button = Info config = OSDStreamInfos end # enter the number 0 begin button = 0 prog = xine repeat = 0 config = Number0 end # enter the number 1 begin button = 1 prog = xine repeat = 0 config = Number1 end # enter the number 2 begin button = 2 prog = xine repeat = 0 config = Number2 end # enter the number 3 begin button = 3 prog = xine repeat = 0 config = Number3 end # enter the number 4 begin button = 4 prog = xine repeat = 0 config = Number4 end # enter the number 5 begin button = 5 prog = xine repeat = 0 config = Number5 end # enter the number 6 begin button = 6 prog = xine repeat = 0 config = Number6 end # enter the number 7 begin button = 7 prog = xine repeat = 0 config = Number7 end # enter the number 8 begin button = 8 prog = xine repeat = 0 config = Number8 end # enter the number 9 begin button = 9 prog = xine repeat = 0 config = Number9 end |
Author: | thornsoft [ Tue Mar 21, 2006 3:40 pm ] |
Post subject: | StreamZap working fine now on R5B7 / SONY RM-AV3000 |
Just FYI. I had added a streamzap remote to an existing R5B26 installation. I followed the write-ups, to no avail. Wasn't working at all, and irw wasn't showing me anything. Seemed to be a familiar story, as I wound through various discussions. I updated to R5B7, and it is now working like a champ. I taught it to my Sony RM-AV3000, and it's having trouble with the codes. The Sony has a bug where it freaks out with some "dirty codes", usually on Marantz equipment. It'll keep transmitting over and over, can't shut it down without pulling the batteries (which you need to leave out for 20 secs or you'll hard-reset the whole unit, erasing all programming!). It seems to really dislike the streamzap codes. I had originally programmed them all with "long burst" (hold key down on sending unit until the Sony unit beeps) but re-programming with "short burst" (just a tap, then release) seems to do the trick. So I spent about an hour re-learning some of the codes that had trouble, and now it seems to be pretty stable (knock on wood). I started with a TiVo layout for the soft buttons on the Sony, and instead of the regular << >> buttons, I'm substituting the left/right arrows for the superior "skip" in Myth instead of the FF, FFF speedup. I added some label buttons for "Commercial skip" and "TV Listing", which took a little work in the lircrc file to remap some buttons that I wasn't using (vol up/down) to be "jump points". ex: Code: begin
prog = mythtv button = VOL_DOWN config = ALT+T //TV "Now Playing" list, from anywhere. end It's all coming together very nicely... |
Author: | parkinpants [ Thu May 03, 2007 2:58 pm ] |
Post subject: | nova-t - hauppage grey remote |
1. Diagnose which event number controls my remote, usually it is 1 or 2 and will change if I plug in USB devices. Code: cat /dev/input/eventX 2. edit... Code: /etc/lirc/hardware.conf change the following lines... X being the correct event number Code: DEVICE="/dev/input/eventX" DRIVER="dev/input" 3. restart lirc: Code: /etc/init.d/lirc restart 4. replace Code: /etc/lirc/lircd.conf and Code: /home/mythtv/.mythtv/lircrc
with the examples posted by mad_paddler here... http://mysettopbox.tv/phpBB2/viewtopic.php?t=6089 I would be very happy if this tweaking was no longer required. |
Author: | mattbatt [ Thu Apr 24, 2008 10:57 pm ] |
Post subject: | |
I am using an old IR wireless keyboard and I "learned" my keys into a universal remote. |
Page 4 of 4 | All times are UTC - 6 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |