LinHES Forums http://forums.linhes.org/ |
|
slave backend on a PII-400 with a HD3000 http://forums.linhes.org/viewtopic.php?f=8&t=3950 |
Page 1 of 1 |
Author: | aovermy [ Thu Mar 24, 2005 4:37 pm ] |
Post subject: | slave backend on a PII-400 with a HD3000 |
IBM PC model PL300 Intel 440BX chipset with a HD3000. R5A12 worked like a charm. Ran auto install, in mythtv-setup filled out the database info to point back to my master backend, checked the mysql.txt and just needed to add a pchdtv card type. It was that easy. Just like a PVR250 install. I went to the bother of installing the DVB drivers for HD3000, but that was just 'cause my system already has the air2pc dvb drivers in it; but I really didn't have to, the card worked just fine with the stock drivers that came with R5A12. Oh, and that is enough horsepower for a slave backend. Amy |
Author: | benjohnson [ Thu Mar 24, 2005 9:18 pm ] |
Post subject: | |
Two questions, How much memory and what percentage is the CPU being utilized??? I have an old PII-400 board lying around that I had tried to use as a front end. It would be cool to see if I could use two HD-3000's in a remote backend right where my antenna comes in to maximize my signal. |
Author: | aovermy [ Fri Mar 25, 2005 1:54 am ] |
Post subject: | |
196Meg (what I already had in there). I'll check the percentage when I get back to my myth system. Amy |
Author: | kclien [ Mon Mar 28, 2005 1:13 pm ] |
Post subject: | |
I'm pretty surprised this worked. I was trying to get a backend working with a celeron 466 on an abit bm6(440bx chipset). The HD-3000 was never recognized on that system. I have no problem with it in a newer system. When I went back and read the specs on the 440bx chipset, I found out it was only pci 2.1. The hd-3000 requires pci 2.2. |
Page 1 of 1 | All times are UTC - 6 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |