| LinHES Forums http://forums.linhes.org/ |
|
| R5C7 - MSI NEO4 Platinum, AV-710 sound, PVR-500 http://forums.linhes.org/viewtopic.php?f=9&t=10601 |
Page 1 of 1 |
| Author: | gilroy [ Sat Jun 24, 2006 10:40 am ] |
| Post subject: | R5C7 - MSI NEO4 Platinum, AV-710 sound, PVR-500 |
I've had a little trouble so far. I based my hardware selection off the KRP . I used a different case (Antec Sonata II) and I don't have any HD OTA channels available so I went with a Hauppauge PVR-500. Also I upped my HDD to 320GB with WD320SB. I did a dragon - auto install. Problems: 1. Can't change channels Solved by solution discussed here: http://mysettopbox.tv/phpBB2/viewtopic. ... highlight= i.e. Code: cd /lib/modules/2.6.15-chw-2/kernel/drivers/media/video mv tveeprom.ko tveeprom.ko.orig mv tuner.ko tuner.ko.orig mv tda9887.ko tda9887.ko.orig 2. No sound thru S/PDIF Solved by solution discussed here: http://mysettopbox.tv/phpBB2/viewtopic. ... o&start=15 I already had disabled the onboard sound thru BIOS. i.e. Code: 2] After getting to the point of watching TV, go to Utilities/Setup -> Setup -> General (next, next), and then set audio output device to /dev/adsp (from default of /dev/dsp).
I will update as I push thru all the functionality Knoppmyth Version: RC5C7 My config: AMD64 3200+ Venice Zalman CNPS7000B-ALCU MSI K8N NEO4 Platinum MB Corsair PC3200 1GB WD 3200SB ASUS N6200TC 64MB Plextor PX-716A DVD+-RW IDE Hauppauge PVR-500 Chaintech AV-710 Antec Sonata II Case w/ 450W PSU Saphire Remote Wonder RF USB Zalman NB47J |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|