LinHES Forums http://forums.linhes.org/ |
|
R5D1; K8NGM2; A64-3800+; 6600 PCI-E; Hauppage PVR-150 http://forums.linhes.org/viewtopic.php?f=9&t=11576 |
Page 1 of 1 |
Author: | baishen78 [ Tue Sep 12, 2006 9:35 am ] |
Post subject: | R5D1; K8NGM2; A64-3800+; 6600 PCI-E; Hauppage PVR-150 |
# Video type: SDTV # Type of system: combined front- and back-end # Noise level: I can tell it's on until I play some media # CASE: Enlight case # PSU: came with the case # MOTHERBOARD: MSI K8NGM2 # CPU: Athlon 64 3800+ # RAM: 2 Kingston 256MB DDR400 PC3200 # CPU HEATSINK: Zalman Cooler # NORTHBRIDGE HEATSINK: # CD/DVD-RW: LG DVD # HDD: Seagate 750GB # GRAPHICS CARD: MSI 6600 PCI-E # SOUNDCARD: onboard # TUNER CARD: Hauppauge PVR-150 # REMOTE CONTROL: Hauppauge dogbone(came with PVR-150) Only had two problems out of the box. Had to recompile the sound drivers, and add a config setting for the tuner card. Also, the tv won't display if there's a monitor plugged in. This is how I recompiled the sound drivers. (taken from here with a change in driver version) a) open a term window (i.e. Alt-x), b) become super-user (su) c) cd /usr/src d) wget ftp://ftp.alsa-project.org/pub/driver/a ... 12.tar.bz2 e) tar jxvf alsa-driver-1.0.12.tar.bz2 f) cd alsa-driver-1.0.12 g) ./configure h) make i) make install The sound worked after following the above instructions plus a reboot. Make sure you find the mixer and turn up both volumes to 90% or more. And this is how I configured the tuner card. I had to put "options ivtv tuner=50" in /etc/modprobe.conf |
Author: | baishen78 [ Fri Sep 15, 2006 9:15 am ] |
Post subject: | |
I also had no sound with ZSNES. I was able to get the sound to work when I ran ZSNES as root, but then I managed to break that. I'll post again once I get it working. |
Author: | baishen78 [ Sun Sep 24, 2006 9:19 am ] |
Post subject: | |
I just swapped out my 200G drive for one of the new Seagate 750G drives. I did a reinstall with no backups(didn't have any shows I was worried about). What's interesting is that when I did the reinstall(using the same burned cd), I didn't have to do anything to get the sound working. I still have to set the tuner type, though. Food for thought. |
Author: | baishen78 [ Sat Mar 03, 2007 1:17 pm ] |
Post subject: | |
Did another reinstall jus' an hour ago. Installed R5E50. Only had a few issues. One was the 150/VBI issue. I fixed that by changing my recording resolution to 720x480. The other problem I'm having is that my channels wouldn't add from the listing. I had to add them through a channel scan. So I don't have the correct channel names. Haven't figured out how to fix it yet. |
Page 1 of 1 | All times are UTC - 6 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |