I installed KnoppMyth R5D1 and used the old Pinnacle PCTV Remote control with serial receiver.
The label inside the remote shows this info:
Quote:
RC0508/00
3139 228 84321
MADE IN CHINA
CS 02947 B 004490
Selecting option "pinnacle_systems" from the LIRC configuration tool (/usr/local/bin/lirc-reconfig.sh as user mythtv) didn't work. It took me quite some time to figure out what to do, but as many a times, the solution was very simple. This is what was changed:
1. Replace /etc/lirc/lircd.conf and /home/mythtv/.mythtv/lircrc (if needed reset rights with: chown mythtv:109 lircrc).
These files can be used for the conf file:
/usr/local/share/knoppmyth/remotes/pctv/etc/lircd.conf
or
/usr/share/lirc/remotes/pinnacle_systems/lircd.conf.pctv
The lircrc is not available in the distro; change manually (see below) or google.
2. Change setting in /etc/lirc/hardware.conf:
- Change DRIVER="default" to DRIVER="pinsys"
- Disable the line with MODULES by prefixing #.
This is the code in my lircrc that works with my remote:
Code:
begin
prog = mythtv
button = Power
config = Esc
end
begin
prog = mythtv
button = Mute
config = F9
end
begin
prog = mythtv
button = Chan+Play
config = Up
end
begin
prog = mythtv
button = Chan-Stop
config = Down
end
begin
prog = mythtv
button = Vol-Rew
config = Left
end
begin
prog = mythtv
button = Vol+FF
config = Right
end
begin
prog = mythtv
button = 1
config = 1
end
begin
prog = mythtv
button = 2
config = 2
end
begin
prog = mythtv
button = 3
config = 3
end
begin
prog = mythtv
button = 4
config = 4
end
begin
prog = mythtv
button = 5
config = 5
end
begin
prog = mythtv
button = 6
config = 6
end
begin
prog = mythtv
button = 7
config = 7
end
begin
prog = mythtv
button = 8
config = 8
end
begin
prog = mythtv
button = 9
config = 9
end
begin
prog = mythtv
button = 0/AV
config = 0
end
begin
prog = mythtv
button = Fullscreen
config = Return
end
begin
prog = mythtv
button = Info
config = I
end
begin
prog = mythtv
button = Preview
config = M
end
begin
prog = mythtv
button = Record
config = D
end
begin
prog = mythtv
button = Chan_Last
config = P
end
begin
prog = mythtv
button = F_TV
repeat = 3
config = F10
end
begin
prog = mythtv
button = F_RADIO
repeat = 3
config = F11
end
#MPlayer
begin
prog = mplayer
button = Power
config = quit
end
begin
prog = mplayer
button = Mute
config = mute
end
begin
prog = mplayer
button = Chan+Play
config = pause
end
begin
prog = mplayer
button = Chan-Stop
config = quit
end
begin
prog = mplayer
button = Vol-Rew
config = seek -60
repeat = 1
end
begin
prog = mplayer
button = Vol+FF
config = seek +60
repeat = 1
end
begin
prog = mplayer
button = F_RADIO
config = volume +1
repeat = 1
end
begin
prog = mplayer
button = F_TELETEXT
config = sub_visibility
end
begin
prog = mplayer
button = F_TV
config = volume -1
repeat = 1
end
begin
prog = mplayer
button = Info
config = osd
end
update: added buttons for volume+subtitles in mplayer