LinHES Forums
http://forums.linhes.org/

R5F27/Intel 845/P4 1.7ghz/Nvidia 5200/PVR-500/Kworld 115
http://forums.linhes.org/viewtopic.php?f=9&t=18178
Page 1 of 1

Author:  novellahub [ Wed Apr 16, 2008 2:35 pm ]
Post subject:  R5F27/Intel 845/P4 1.7ghz/Nvidia 5200/PVR-500/Kworld 115

# Video type: HDTV / SDTV
# Type of system: [Slave back end Only]
# Noise level: [I can barely hear it from 5 feet away]

# CASE: Generic Beige Desktop case
# PSU: Sparkle 350W
# MOTHERBOARD: Intel Desktop Board D845GERG2L (mATX)
# CPU: P4 1.7 Ghz (Socket 478)
# RAM: 512 MB DDR 266
# CPU HEATSINK: Stock Intel
# NORTHBRIDGE HEATSINK: Stock
# CD/DVD-RW: Lite-On DVD Burner
# HDD: 80 GB Hard Drive (Western Digital)
# GRAPHICS CARD: Nvidia 5200 AGP
# SOUNDCARD: On Board sound (Integrated AC'97 Audio)
# TUNER CARD: PVR-500 and Kworld 115
# NIC: D-Link DGE-530T Gigabit Ethernet
# REMOTE CONTROL: None

Did a stock auto install of R5F27 and had to do a few edits to make it a slave only machine. See this wiki page for more info (I did not to the exports or NFS steps):

http://www.knoppmythwiki.org/index.php? ... ckendHowTo

Note: My master IP address is 192.168.0.200 and the Slave is 192.168.0.100

From a command line as root:

Code:
update-rc.d -f mysql remove
update-rc.d -f apache remove
rm -fr /etc/cron.daily/mythtv-backend


nano /etc/mythtv/mysql.txt

Code:
DBHostName=mythtvmaster
DBUserName=mythtv
DBPassword=mythtv
DBName=mythconverg
LocalHostName=mythtvslave


Open Xterm:

Code:
su mythtv-setup
In mythtv-setup:
set local ip (default 127.0.0.1) to 192.168.0.100
set master backend ip to 192.168.0.200
setup capture cards


See the Kworld 115 wiki page for how to set it up:

http://www.knoppmythwiki.org/index.php? ... ld115HowTo


After that I rebooted both the master and slave machines (Slave first and then Master). Now I have 6 tuners between two Mythtv machines. :)

Author:  novellahub [ Mon Apr 28, 2008 6:59 am ]
Post subject: 

Just as a note, all the hardware except the Kworld 115 could be considered Tier 1 if I did not do the slave backend steps.

Page 1 of 1 All times are UTC - 6 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/