LinHES Forums http://forums.linhes.org/ |
|
R5F27, HVR-1600, ASUS M3A, nVidia 8600GT http://forums.linhes.org/viewtopic.php?f=9&t=18292 |
Page 1 of 1 |
Author: | paulsid [ Sat May 10, 2008 4:28 pm ] |
Post subject: | R5F27, HVR-1600, ASUS M3A, nVidia 8600GT |
# Video type: SDTV (going to HDTV by year end) # Type of system: combined front- and back-end # Noise level: I can barely hear it from 5 feet away (unless the room is totally silent) # CASE: Antec Sonata III # PSU: Antec 500W # MOTHERBOARD: ASUS M3A # CPU: AMD Athlon64 X2 5200+ (dual core) # RAM: 2GB Kingston 667MHz # CPU HEATSINK: Unknown # NORTHBRIDGE HEATSINK: Unknown # CD/DVD-RW: Pioneer 16X DVD-RW # HDD: WD 500GB SATA # GRAPHICS CARD: Palit nVidia GeForce 8600GT # SOUNDCARD: none (onboard sound) # TUNER CARD: Hauppage HVR-1600 # REMOTE CONTROL: Hauppage A415-HPG (with IR Blaster) I haven't seen a system using the HVR-1600 mentioned here yet so I wanted to pass on details of a setup using the most recent beta driver. It was not easy, but it's definitely doable even by someone with just a limited working knowledge of Linux - I know this because that's all I have. This system is certainly overkill for SDTV but as mentioned I will be moving to HDTV later so I wanted a system that will be able to handle this. The entire system cost about $800 CDN including tax, which isn't much higher than retail HDPVR boxes go for here, and of course MythTV does so much more! I'll outline the steps I followed below. Because it's long I have also put together a detailed guide on a web page, including links to appropriate references so you don't have to hunt all over for them like I did. (If there's somewhere more suitable to put this info please let me know and I'll happily move it.) The three difficulties are the Tuner card (of course, it's beta), the motherboard (LAN driver isn't built into R5F27's kernel), and the video card (looks like common issues with all new nVidia cards). The normal KnoppMyth install from CD works but on reboot gives the infamous "c7 respawn" error that prevents X from working. Here are the steps from that point:
I've had the system going non-stop for almost three weeks now. As mentioned I am using SDTV with the IR Blaster and TV out. The analogue tuner also works on its own. I am now trying to get both going at once but I haven't had much time for that yet. Any issues have been minor: first time after I booting the video is all choppy but works fine after that; and once the backend died for no apparent reason. Maybe these are common issues but I haven't done any research yet. So yes it was a lot of work, but so far it's been worth it! |
Author: | cecil [ Sun May 11, 2008 1:25 am ] |
Post subject: | Re: R5F27, HVR-1600, ASUS M3A, nVidia 8600GT |
paulsid wrote: So yes it was a lot of work, but so far it's been worth it!
|
Author: | yaplej [ Thu May 22, 2008 12:40 am ] |
Post subject: | |
Wow good job on getting the 1600 to work. I cannot wait to finish my math class (only 3 weeks left), and get a chance to test mine out. |
Page 1 of 1 | All times are UTC - 6 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |