View unanswered posts    View active topics

All times are UTC - 6 hours





Post new topic Reply to topic  [ 1 post ] 
Print view Previous topic   Next topic  
Author Message
Search for:
PostPosted: Fri Nov 01, 2019 1:35 pm 
Offline
Joined: Tue Aug 08, 2006 7:08 pm
Posts: 561
Location: UK
# Video type: [SDTV]
# Type of system: [combined front- and back-end]
# Noise level: [I can tell it's on until I play some media]
# CASE:Silverstone Lascala LC17S
# PSU: Cooler Master B700
# MOTHERBOARD: Gigabyte GA-970A-DS3P
# CPU: Athlon X2 265
# RAM: 16Gb 2x8Gb PC1866 DDR3 DIMM
# CPU HEATSINK:Artic Cooling v7
# NORTHBRIDGE HEATSINK: Onboard
# CD/DVD-RW: Asus DRW-24D5MT
# HDD: TOSHIBA 500Gb, Western Digital Black 2TB, Western Digital Black 4TB
# GRAPHICS CARD: Zotac nVidia GT1080
# SOUNDCARD: Onboard, Using HDMI
# TUNER CARD:Hauppauge Nova-T 500, Hauppauge Nova-T
# REMOTE CONTROL:Hauppauge A415-HPG-WE

After doing the initial build, and test booting with System Rescue CD and Kubuntu, I found that the USB keyboard and mouse combo would become unusable. After a search, I found I had to set in the BIOS the IOMMU Controller to Enabled. Rebooting the box, the keyboard and mouse were now usable.
In addition on shutdown, it would not shut off and keep repeating something like:
Code:
cx88[0]:   irq4 :0xffffffff [ INVALID sol eol irq2 irq1 23 22 21 20 19 cnt1 cnt0 resync 14 13 12<4>[530.184999]

I recall when setting up you had to disable a module on load up and unload the cx8800 module on shutdown. I found this which lead to editing /etc/rc.local.shutdown and adding:
(For LinHES 7.x)
Code:
/sbin/rmmod cx8800

(For LinHES 8.x)
Code:
/sbin/modprobe -r cx8800

Edit /etc/modprobe.d/blacklist_alsa.conf which is added the line
Code:
blacklist cx88_alsa


For the Nova-T 500 for the IR input to be disabled and and to make sure the card did not go to sleep, /etc/modprobe.d/dvb-t.conf was edited with:
Code:
#activate dvb amplifiers
#options dvb-usb-dib0700 force_lna_activation=1
# above disabled as for later kernels it appears to active as default
#disable usb ir
options dvb-usb disable_rc_polling=1

#disable usb sleep
options usbcore autosuspend=-1


On booting the following messages appear:
Code:
    0.881705] AMD-Vi: Event logged [IO_PAGE_FAULT device=02:00.0 domain=0x0016 address=0x00000000be268880 flags=0x0010]
[    0.881793] AMD-Vi: Event logged [IO_PAGE_FAULT device=02:00.0 domain=0x0016 address=0x00000000be268880 flags=0x0010]
[    0.881878] AMD-Vi: Event logged [IO_PAGE_FAULT device=02:00.0 domain=0x0016 address=0x00000000be268880 flags=0x0010]
[    0.881990] AMD-Vi: Event logged [IO_PAGE_FAULT device=02:00.0 domain=0x0016 address=0x00000000be268880 flags=0x0010]
[    0.882075] AMD-Vi: Event logged [IO_PAGE_FAULT device=02:00.0 domain=0x0016 address=0x00000000be268880 flags=0x0010]
[    0.882162] AMD-Vi: Event logged [IO_PAGE_FAULT device=02:00.0 domain=0x0016 address=0x00000000be268880 flags=0x0010]
[    0.882246] AMD-Vi: Event logged [IO_PAGE_FAULT device=02:00.0 domain=0x0016 address=0x00000000be268880 flags=0x0010]
[    0.882330] AMD-Vi: Event logged [IO_PAGE_FAULT device=02:00.0 domain=0x0016 address=0x00000000be268880 flags=0x0010]
[    0.882418] AMD-Vi: Event logged [IO_PAGE_FAULT device=02:00.0 domain=0x0016 address=0x00000000be268880 flags=0x0010]
[    0.882510] AMD-Vi: Event logged [IO_PAGE_FAULT device=02:00.0 domain=0x0016 address=0x00000000be268880 flags=0x0010]
[    0.882607] AMD-Vi: Event logged [IO_PAGE_FAULT device=02:00.0 domain=0x0016 address=0x00000000be268880 flags=0x0010]
[    0.882703] AMD-Vi: Event logged [IO_PAGE_FAULT device=02:00.0 domain=0x0016 address=0x00000000be268880 flags=0x0010]
[    0.882797] AMD-Vi: Event logged [IO_PAGE_FAULT device=02:00.0 domain=0x0016 address=0x00000000be268880 flags=0x0010]
[    0.882896] AMD-Vi: Event logged [IO_PAGE_FAULT device=02:00.0 domain=0x0016 address=0x00000000be268880 flags=0x0010]
[    0.882994] AMD-Vi: Event logged [IO_PAGE_FAULT device=02:00.0 domain=0x0016 address=0x00000000be268880 flags=0x0010]
[    0.883092] AMD-Vi: Event logged [IO_PAGE_FAULT device=02:00.0 domain=0x0016 address=0x00000000be268880 flags=0x0010]
[    0.883218] AMD-Vi: Event logged [IO_PAGE_FAULT device=02:00.0 domain=0x0016 address=0x00000000be268880 flags=0x0010]


Executing the following revealed:
Code:
# lspci -v -s 02:00.0
02:00.0 USB controller: VIA Technologies, Inc. VL805 USB 3.0 Host Controller (rev 01) (prog-if 30 [XHCI])
        Subsystem: Gigabyte Technology Co., Ltd Device 5007
        Flags: fast devsel, IRQ 28
        Memory at f7300000 (64-bit, non-prefetchable) [size=4K]
        Capabilities: [80] Power Management version 3
        Capabilities: [90] MSI: Enable- Count=1/4 Maskable- 64bit+
        Capabilities: [c4] Express Endpoint, MSI 00
        Capabilities: [100] Advanced Error Reporting
        Kernel modules: xhci_pci


Nothing seems to be failing at the moment, so I'm not worrying about this.

Bruce S.

_________________
Updated 2019/10/26: AthlonII X2 265 Gigabyte GA-970A-DS3P
16Gb PC 1866 DDR3, 500GB+2TB+4TB SATA HDD,
SATA DVD-RW Asus DRW-24D5MT , NVIDIA GeForce GT1080
Hauppauage Nova-T 500, Nova-T LinHes R8.6.1


Top
 Profile  
 

Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 1 post ] 


All times are UTC - 6 hours




Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group

Theme Created By ceyhansuyu