mstralka wrote:
I'm in the US so I use NTSC and have Comcast cable (regular).
Originally, all of my channels were off by one and the colors were all black and white. In xawtv, I was able to manually finetune them all to +15 to restore the color, but they were still off by one. CNN appeared on 27, when it should have been on 26, etc. To correct this, I found the following URL at Freevo's website:
http://freevo.sourceforge.net/cgi-bin/doc/Hardware/bttvFirst, I tested what they suggested by doing the following:
Code:
rmmod bttv
rmmod tuner
modprobe bttv tuner=2
xawtv
Once I confirmed that the colors and channels worked correctly, I edited my /etc/mythtv/modules/bttv file, adding the following:
Code:
modprobe bttv card=64 tuner=2
That was it! MythTV has worked great since then
err, I think you said "modprobe" but meant "options" in the /etc/mythtv/modules/bttv file...
Hi, I just added an old ATI TV Wonder VE card to my system running 2 PVR-250s and had to tweak it to get the bttv bt878 card to work.
To find out which /etv/mythtv/modules/bttv? file was being used type
#modprobe -c | grep "bttv"
and look for "include". In my case it is /etc/mythtv/modules/bttv2
I added the line
options bttv card=64 tuner=2
and it works fine. Verify it is showing up correctly configured by doing
dmesg | grep "bttv" | less
Andrew Lynch