Author |
Message |
beefy
|
Posted: Sun Nov 25, 2007 10:07 pm |
|
Joined: Sun Nov 25, 2007 9:35 pm
Posts: 5
|
So, I hate to enter a new community with a problem, but here I am. My cousin just talked me into trying Linux today and it seems that I had enough parts laying around to build another computer. The Motehrboard I have is an Abit AT7, which doesn't have any support for legacy/PS/2 devices. Since I don't have any spare usb keyboard laying around, I plug a legacy keyboard into a converter and then a USB port. It seems to work for the initial boot, but at the screen where you can select different install options I no longer have a functioning keyboard. The lights on the keyboard occasionaly blink, but thats it. Any tricks?
Thanks
EDIT:
I stole my wifes usb keyboard to avoid the converter, same results. How do I make usb stuff work before installing?
Another EDIT:
I tried unplugging and plugging in the keyboard at various times during the boot, plugging in another keyboard, and verifying the bios settings, no progress.
|
|
Top |
|
|
cecil
|
Posted: Sun Nov 25, 2007 11:45 pm |
|
|
Site Admin |
Joined: Fri Sep 19, 2003 6:37 pm
Posts: 2659
Location:
Whittier, Ca
|
Check your BIOS, look for legacy keyboard. That is about all I can think of... USB keyboards should work without issue.
|
|
Top |
|
|
beefy
|
Posted: Sun Nov 25, 2007 11:50 pm |
|
Joined: Sun Nov 25, 2007 9:35 pm
Posts: 5
|
went throught the bios a couple times... only thing I could find was 'support USB on startup' or something like that. It was set to 'BIOS' so I changed it to 'OS' as that was the only option. It wouldn't even boot then so I had to clear and reset the bios to 'Bios'.
EDIT:
If you say Bios in your head enough times it really starts sounding weird. Buy OSS. Be Os. Bios bios bios. ....sorry.
|
|
Top |
|
|
mjl
|
Posted: Mon Nov 26, 2007 12:24 pm |
|
Joined: Sun Jun 12, 2005 10:55 pm
Posts: 3161
Location:
Warwick, RI
|
Hi,
What version are experimenting with? R5F27 would be the lastest release and it does work very well (at least for me )
Mike
|
|
Top |
|
|
beefy
|
Posted: Mon Nov 26, 2007 7:12 pm |
|
Joined: Sun Nov 25, 2007 9:35 pm
Posts: 5
|
oops. Yes, I am using R5F27.
|
|
Top |
|
|
mjl
|
Posted: Mon Nov 26, 2007 9:16 pm |
|
Joined: Sun Jun 12, 2005 10:55 pm
Posts: 3161
Location:
Warwick, RI
|
Hi,
Then possibly suspect your converter module. I have two different vendors, Belkin & APC which both work without issues on a Gateway (usb only box) as well as anything I plugged them into, so far. That's for both kybd & mouse.
Mike
|
|
Top |
|
|
beefy
|
Posted: Mon Nov 26, 2007 10:01 pm |
|
Joined: Sun Nov 25, 2007 9:35 pm
Posts: 5
|
well, it worked fine on the last build, and works at boot (when you hit enter). As it's initializing the install (or whatever it does) before the menu of choices pops up the usb looses power. About the same time the screen reads 'searching for USB Devices'. After that I can't do anything except reset.
|
|
Top |
|
|
jmckeown2
|
Posted: Tue Nov 27, 2007 5:43 am |
|
Joined: Sat Sep 02, 2006 9:17 am
Posts: 359
|
beefy wrote: went throught the bios a couple times... only thing I could find was 'support USB on startup' or something like that. It was set to 'BIOS' so I changed it to 'OS' as that was the only option. It wouldn't even boot then so I had to clear and reset the bios to 'Bios'.
EDIT:
If you say Bios in your head enough times it really starts sounding weird. Buy OSS. Be Os. Bios bios bios. ....sorry.
Given that you even HAVE that option on a MB that doesn't have PS/2 ports; you may want to check with Abit and see if there's a newer BIOS for your board. As you noticed, once you set the option to "OS" there's no going back except for a reset, because BIOS doesn't see the keyboard any more. It's basically a "Kiss BIOS access goodbye" option.
If you want to try this again, before you change the keyboard support back to OS, also look for "Halt on" or something to that effect. change from "All Errors" to "All except keyboard" and it should get you further than last time. You couldn't boot because BIOS no longer recognized the USB keyboard, and wouldn't boot without a keyboard. The change to the "Halt on" option lets it boot without a recognized keyboard.
|
|
Top |
|
|
Greg Frost
|
Posted: Tue Nov 27, 2007 6:02 am |
|
Joined: Mon May 10, 2004 8:08 pm
Posts: 1891
Location:
Adelaide, Australia
|
I have heard of some people having success by unplugging and then plugging back in the keyboard. You may want to try that.
|
|
Top |
|
|
beefy
|
Posted: Tue Nov 27, 2007 9:19 am |
|
Joined: Sun Nov 25, 2007 9:35 pm
Posts: 5
|
jmckeown2 wrote: If you want to try this again, before you change the keyboard support back to OS, also look for "Halt on" or something to that effect. change from "All Errors" to "All except keyboard" and it should get you further than last time. You couldn't boot because BIOS no longer recognized the USB keyboard, and wouldn't boot without a keyboard. The change to the "Halt on" option lets it boot without a recognized keyboard.
I did see a 'halt on' option, I didn't mess with it though. I'll try messing witha few of those options tonight.
I saw the tip about unplugging and plugging back in during boot, tried it many different times but haven't got it working yet.
|
|
Top |
|
|