Author |
Message |
dfdario
|
Posted: Sat Feb 22, 2014 6:04 am |
|
Joined: Tue May 11, 2010 2:51 am
Posts: 31
Location:
Turin - Italy
|
I have an already running LinHES 6.03 wife is using a lot. I am now trying to make a new system with LinHES R8.1.1, Asus F1A55-V, 8GB RAM, 80GB HDU (just for testing purpose). I think the Arch USB driver might have some configuration problem because of: - USB memories when plugged in are mounted as read only and even reformatted show the previous content. - A USB WiFi dongle is properly recognized but it does not connect to modem (WPA2).
The same Mobo is running perfectly with Windows 7 and Ubuntu 12.04.
Here is a useful part of lspci: 01:05.0 Multimedia video controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder (rev 05) 01:05.1 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] (rev 05) 01:05.2 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] (rev 05) 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) 04:00.0 USB controller: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller
This is lsusb: Bus 002 Device 002: ID 129b:1667 CyberTAN Technology 802.11bg Bus 004 Device 003: ID 05dc:a761 Lexar Media, Inc. Bus 006 Device 002: ID 046d:c018 Logitech, Inc. Optical Wheel Mouse Bus 007 Device 002: ID 03f0:0024 Hewlett-Packard KU-0316 Keyboard Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 009 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
The WiFi dongle config in dmesg appears as: [ 11.707982] zd1211rw 2-1:1.0: firmware version 4725 [ 11.763749] zd1211rw 2-1:1.0: zd1211b chip 129b:1667 v4810 high 00-21-04 AL2230S_RF pa0 ---N- [ 11.768749] cfg80211: Calling CRDA for country: DE [ 11.773211] cfg80211: Regulatory domain changed to country: DE [ 11.773219] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 11.773224] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 11.773229] cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 11.773233] cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 11.773236] cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm) [ 11.829710] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Any clue?
_________________ MBE - ASUS M2NPLUS PRO | RAM 4GB | HD 1TB | 4xHVR-1300 | LinHES 6.03
FE -D945GLF2 | RAM 2GB | HD 250GB | LinHES 6.03
Last edited by dfdario on Mon Feb 24, 2014 1:39 pm, edited 2 times in total.
|
|
Top |
|
|
RacerX
|
Posted: Sat Feb 22, 2014 11:02 am |
|
Joined: Sun Sep 05, 2004 7:06 pm
Posts: 690
|
|
Top |
|
|
dfdario
|
Posted: Sat Feb 22, 2014 11:34 am |
|
Joined: Tue May 11, 2010 2:51 am
Posts: 31
Location:
Turin - Italy
|
Thanks RacerX for the quick answer. I already updated the Bios to the latest version available r.1005. There must be something tricky I am not realizing yet. Trying to install LinHES 6.03 or even 7.4 the system got stuck. The 6.03 due to some ATI compatibility issue, while 7.4 I am not investigated further. LinHES 8.1.1 works pretty well but the WiFi and USB. I would have Hauppauge remote issue as well and furthermore wine installable would be appreciated but for that I have to wait for v.8.2.
_________________ MBE - ASUS M2NPLUS PRO | RAM 4GB | HD 1TB | 4xHVR-1300 | LinHES 6.03
FE -D945GLF2 | RAM 2GB | HD 250GB | LinHES 6.03
|
|
Top |
|
|
RacerX
|
Posted: Sat Feb 22, 2014 12:20 pm |
|
Joined: Sun Sep 05, 2004 7:06 pm
Posts: 690
|
|
Top |
|
|
dfdario
|
Posted: Sat Feb 22, 2014 1:59 pm |
|
Joined: Tue May 11, 2010 2:51 am
Posts: 31
Location:
Turin - Italy
|
See attachment.
Attachments
_________________ MBE - ASUS M2NPLUS PRO | RAM 4GB | HD 1TB | 4xHVR-1300 | LinHES 6.03
FE -D945GLF2 | RAM 2GB | HD 250GB | LinHES 6.03
|
|
Top |
|
|
mattbatt
|
Posted: Sat Feb 22, 2014 10:51 pm |
|
Joined: Tue Aug 15, 2006 11:14 am
Posts: 1343
Location:
Orlando FL
|
|
Top |
|
|
dfdario
|
Posted: Sun Feb 23, 2014 6:56 am |
|
Joined: Tue May 11, 2010 2:51 am
Posts: 31
Location:
Turin - Italy
|
I tryed on another windows 7 Intel machine with virtualbox and no issues. Unfortunately if I try to install LinHES on the current F1A55 PC and Ubuntu 12.04 I have UUID and ro problems at boot I don't want investigate further.
_________________ MBE - ASUS M2NPLUS PRO | RAM 4GB | HD 1TB | 4xHVR-1300 | LinHES 6.03
FE -D945GLF2 | RAM 2GB | HD 250GB | LinHES 6.03
|
|
Top |
|
|
RacerX
|
Posted: Sun Feb 23, 2014 12:52 pm |
|
Joined: Sun Sep 05, 2004 7:06 pm
Posts: 690
|
I think the issue leans more toward the usb controller ASM1042. It's not very well supported in Linux but it works fine in Windows . Rather than trying a different box, why not test a usb card and see if that works better...
|
|
Top |
|
|
dfdario
|
Posted: Sun Feb 23, 2014 1:21 pm |
|
Joined: Tue May 11, 2010 2:51 am
Posts: 31
Location:
Turin - Italy
|
Here attached some hints. Particular interest is in dmesg_tail.txt where ther is an error happened in mythinstall when WiFi dongle has been enabled.
Even disabling ASM1042 from BIOS the result is the same
wpa_supplicant -i wlan0 -c /etc/wpa_supplicant.conf reports that the resourse is busy
Attachments
_________________ MBE - ASUS M2NPLUS PRO | RAM 4GB | HD 1TB | 4xHVR-1300 | LinHES 6.03
FE -D945GLF2 | RAM 2GB | HD 250GB | LinHES 6.03
|
|
Top |
|
|
dfdario
|
Posted: Mon Feb 24, 2014 1:36 pm |
|
Joined: Tue May 11, 2010 2:51 am
Posts: 31
Location:
Turin - Italy
|
The solution was to exec: sudo wpa_supplicant -B -i wlan0 -c /etc/net/ifaces/wlan0/wpa_supplicant.conf then sudo dhcpcd wlan0
The problem now is how to make the above executet by default from the system everytime I config the network from UI Is there anyone can tell me how to do this?
_________________ MBE - ASUS M2NPLUS PRO | RAM 4GB | HD 1TB | 4xHVR-1300 | LinHES 6.03
FE -D945GLF2 | RAM 2GB | HD 250GB | LinHES 6.03
|
|
Top |
|
|
dfdario
|
Posted: Fri Mar 07, 2014 6:32 am |
|
Joined: Tue May 11, 2010 2:51 am
Posts: 31
Location:
Turin - Italy
|
Solution for WLAN0: In /etc/net/ create executable script named netup-pre with the following content Code: #!/bin/sh pkill wpa_supplicant pkill dhcpcd ifconfig wlan0 down ifconfig wlan0 up wpa_supplicant -B -Dwext -iwlan0 -c/etc/net/ifaces/wlan0/wpa_supplicant.conf dhcpcd wlan0
To solve USB plugged devices are seen as read only just run: sudo pacman -S ntfs-3g
_________________ MBE - ASUS M2NPLUS PRO | RAM 4GB | HD 1TB | 4xHVR-1300 | LinHES 6.03
FE -D945GLF2 | RAM 2GB | HD 250GB | LinHES 6.03
|
|
Top |
|
|