| Author |
Message |
|
willie44
|
 Posted: Sat Dec 18, 2004 9:16 pm |
|
|
Joined: Fri Dec 10, 2004 10:18 am
Posts: 22
|
|
I am in the middle of troubleshooting the video coming through my PVR-250. In my initial setup, I set tuner0 as the default. I would like to change that to a composite, since I have digital cable.
I also tried cp /dev/video test.mpg for a basic test of the video coming in. What do I need for play that file on Windows. The only linux machine i have is my myth machine.
thanks for any help you can give me
Matt
|
|
| Top |
|
 |
|
gr8nash
|
Posted: Sat Dec 18, 2004 11:33 pm |
|
|
Joined: Thu Apr 01, 2004 10:44 am
Posts: 677
Location:
WA
|
Quote: I also tried cp /dev/video test.mpg
that may work.. never tried.. but most people do this
Code: cat /dev/video > /myth/test.mpg
to play it on windows i like to use VLC player becuase it has deinterlace capabilites.. makes the video look MUCH better.
|
|
| Top |
|
|
|
willie44
|
Posted: Mon Dec 20, 2004 10:45 pm |
|
|
Joined: Fri Dec 10, 2004 10:18 am
Posts: 22
|
|
Thank you for suggesting VLC. It opens the mpg file just fine.
I am still testing the different video sources that are coming into my PVR-250. I will post what i find out.
thanks again
Matt
_________________
Running : KnoppMyth R5A12
ABIT NV7-133R
512MB Crucial
PVR-250 35062 (CX23416 - SAA7115) Tuner Type 50
Maxtor 250 GB x2
|
|
| Top |
|
|
|
willie44
|
Posted: Tue Dec 21, 2004 12:38 pm |
|
|
Joined: Fri Dec 10, 2004 10:18 am
Posts: 22
|
|
Doing cat /dev/video > /myth/test.mpg worked just fine. But the file only captured a black screen. I would like to capture the video coming in through the tuner input. What is the default input for the PVR-250. When i looked through the syslog, it mentioned Composite. Where would I change the input for the PVR-250?
thanks for the help in advance.
_________________
Running : KnoppMyth R5A12
ABIT NV7-133R
512MB Crucial
PVR-250 35062 (CX23416 - SAA7115) Tuner Type 50
Maxtor 250 GB x2
Last edited by willie44 on Tue Dec 21, 2004 12:41 pm, edited 1 time in total.
|
|
| Top |
|
|
|
Xsecrets
|
Posted: Tue Dec 21, 2004 12:40 pm |
|
|
Joined: Mon Oct 06, 2003 10:38 am
Posts: 4978
Location:
Nashville, TN
|
|
well for mythtv you set it in the mythtv-setup program, for general use you would have to use ivtvctl or test_ioctl depending on the version of ivtv you are using.
_________________ Have a question search the forum and have a look at the KnoppMythWiki.
Xsecrets
|
|
| Top |
|
|
|
willie44
|
Posted: Tue Dec 21, 2004 12:46 pm |
|
|
Joined: Fri Dec 10, 2004 10:18 am
Posts: 22
|
Xsecrets wrote: for general use you would have to use ivtvctl or test_ioctl depending on the version of ivtv you are using.
I am using the version that comes with R4V5.
_________________
Running : KnoppMyth R5A12
ABIT NV7-133R
512MB Crucial
PVR-250 35062 (CX23416 - SAA7115) Tuner Type 50
Maxtor 250 GB x2
|
|
| Top |
|
|
|
cesman
|
Posted: Tue Dec 21, 2004 1:02 pm |
|
|
Joined: Fri Sep 19, 2003 7:05 pm
Posts: 5088
Location:
Fontana, Ca
|
|
test_ioctl
_________________
cesman
When the source is open, the possibilities are endless!
|
|
| Top |
|
|
|
willie44
|
Posted: Tue Dec 21, 2004 2:04 pm |
|
|
Joined: Fri Dec 10, 2004 10:18 am
Posts: 22
|
This is what I got from running
Code: test_ioctl --all
Does everything look okay ?
ioctl: IVTV_IOC_G_CODEC
Codec parameters
aspect : 2
audio : 0x00e9
bframes : 3
bitrate_mode: 0
bitrate : 8000000
bitrate_peak: 16000000
dnr_mode : 0
dnr_spatial : 0
dnr_temporal: 0
dnr_type : 0
framerate : 0
framespergop: 15
gop_closure : 0
pulldown : 0
stream_type : 0
ioctl: VIDIOC_G_FMT
Type : Video Capture
Width : 720
Height : 480
ioctl: VIDIOC_QUERYCAP
Driver name : ivtv
Card type : Vanilla iTVC15 card
Bus info : 0
Driver version: 265
Capabilities : 0x01030001
ioctl: VIDIOC_ENUMINPUT
Name : Composite 0
Type : 0x00000002
Audioset: 0x00000001
Tuner : 0x00000000
Standard: 0x 3000 ( NTSC )
Status : 0
Name : Composite 1
Type : 0x00000002
Audioset: 0x00000001
Tuner : 0x00000000
Standard: 0x 3000 ( NTSC )
Status : 0
Name : Composite 2
Type : 0x00000002
Audioset: 0x00000001
Tuner : 0x00000000
Standard: 0x 3000 ( NTSC )
Status : 0
Name : Composite 3
Type : 0x00000002
Audioset: 0x00000001
Tuner : 0x00000000
Standard: 0x 3000 ( NTSC )
Status : 0
Name : Tuner 0
Type : 0x00000001
Audioset: 0x00000000
Tuner : 0x00000000
Standard: 0x 3000 ( NTSC )
Status : 0
Name : Composite 4
Type : 0x00000002
Audioset: 0x00000001
Tuner : 0x00000000
Standard: 0x 3000 ( NTSC )
Status : 0
Name : S-Video 0
Type : 0x00000002
Audioset: 0x00000001
Tuner : 0x00000000
Standard: 0x 3000 ( NTSC )
Status : 0
Name : S-Video 1
Type : 0x00000002
Audioset: 0x00000001
Tuner : 0x00000000
Standard: 0x 3000 ( NTSC )
Status : 0
Name : S-Video 2
Type : 0x00000002
Audioset: 0x00000001
Tuner : 0x00000000
Standard: 0x 3000 ( NTSC )
Status : 0
Name : S-Video 3
Type : 0x00000002
Audioset: 0x00000001
Tuner : 0x00000000
Standard: 0x 3000 ( NTSC )
Status : 0
ioctl: VIDIOC_G_INPUT
Input = 4
ioctl: VIDIOC_G_FREQUENCY
Frequency = 3092
ioctl: VIDIOC_ENUMSTD
ID : 0x 3000
Name : NTSC
Frame period: 1001/30000
Frame lines : 525
ID : 0x FF
Name : PAL
Frame period: 1/25
Frame lines : 625
ID : 0x 7F0000
Name : SECAM
Frame period: 1/25
Frame lines : 625
ioctl: VIDIOC_G_STD
Standard = 0x00003000
ioctl: VIDIOC_QUERYCTRL
Brightness = 128
Contrast = 64
Saturation = 64
Hue = 0
Volume = 59343
Mute = 0
_________________
Running : KnoppMyth R5A12
ABIT NV7-133R
512MB Crucial
PVR-250 35062 (CX23416 - SAA7115) Tuner Type 50
Maxtor 250 GB x2
|
|
| Top |
|
|
View unanswered posts
View active topics
Print view
Previous topic Next topic 
LinHES Home
Board index
FAQ
Search
Login 
Register
