View unanswered posts    View active topics

All times are UTC - 6 hours





Post new topic Reply to topic  [ 3 posts ] 
Print view Previous topic   Next topic  
Author Message
Search for:
PostPosted: Mon Mar 27, 2006 10:59 am 
Offline
Joined: Wed May 18, 2005 3:13 am
Posts: 2
I auto-installed.

First boot gdm tried to load X three times then asked me if I wanted to view the output. I think I have fairly standard hardware (FX5200) (have run x on ubuntu,gentoo etc) see my lspci below.

I tried adding mode lines according to
Code:
`gtf 1280 1024 70 -x`
etc.

Is there a standard FX5200 I can use?

I am currently using a modified version of the one on the wiki. Please see my XF86Config-4 below.

What do I need to change?

Thanks in advance.

lspci:
Code:
0000:00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different version?) (rev c1)
        Subsystem: ABIT Computer Corp.: Unknown device 1c02
        Flags: bus master, 66MHz, fast devsel, latency 0
        Memory at e0000000 (32-bit, prefetchable) [size=64M]
        Capabilities: [40] AGP version 3.0
        Capabilities: [60] #08 [2001]

0000:00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 1 (rev c1)
        Subsystem: nVidia Corporation: Unknown device 0c17
        Flags: 66MHz, fast devsel

0000:00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4 (rev c1)
        Subsystem: nVidia Corporation: Unknown device 0c17
        Flags: 66MHz, fast devsel

0000:00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3 (rev c1)
        Subsystem: nVidia Corporation: Unknown device 0c17
        Flags: 66MHz, fast devsel

0000:00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2 (rev c1)
        Subsystem: nVidia Corporation: Unknown device 0c17
        Flags: 66MHz, fast devsel

0000:00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5 (rev c1)
        Subsystem: nVidia Corporation: Unknown device 0c17
        Flags: 66MHz, fast devsel

0000:00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a4)
        Subsystem: ABIT Computer Corp.: Unknown device 1c02
        Flags: bus master, 66MHz, fast devsel, latency 0
        Capabilities: [48] #08 [01e1]

0000:00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2)
        Subsystem: ABIT Computer Corp.: Unknown device 1c02
        Flags: 66MHz, fast devsel, IRQ 5
        I/O ports at d000 [size=32]
        Capabilities: [44] Power Management version 2

0000:00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4) (prog-if 10 [OHCI])
        Subsystem: ABIT Computer Corp.: Unknown device 1c02
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 16
        Memory at e8002000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [44] Power Management version 2

0000:00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4) (prog-if 10 [OHCI])
        Subsystem: ABIT Computer Corp.: Unknown device 1c02
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 17
        Memory at e8003000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [44] Power Management version 2

0000:00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4) (prog-if 20 [EHCI])
        Subsystem: ABIT Computer Corp.: Unknown device 1c02
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 17
        Memory at e8004000 (32-bit, non-prefetchable) [size=256]
        Capabilities: [44] #0a [2080]
        Capabilities: [80] Power Management version 2

0000:00:04.0 Ethernet controller: nVidia Corporation nForce2 Ethernet Controller (rev a1)
        Subsystem: ABIT Computer Corp.: Unknown device 1c02
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 19
        Memory at e8005000 (32-bit, non-prefetchable) [size=4K]
        I/O ports at d400 [size=8]
        Capabilities: [44] Power Management version 2

0000:00:06.0 Multimedia audio controller: nVidia Corporation nForce2 AC97 Audio Controler (MCP) (rev a1)
        Subsystem: ABIT Computer Corp.: Unknown device 1c02
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 16
        I/O ports at d800 [size=256]
        I/O ports at dc00 [size=128]
        Memory at e8000000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [44] Power Management version 2

0000:00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI Bridge (rev a3) (prog-if 00 [Normal decode])
        Flags: bus master, 66MHz, fast devsel, latency 0
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
        Memory behind bridge: e6000000-e7ffffff
        Prefetchable memory behind bridge: d8000000-dfffffff

0000:00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2) (prog-if 8a [Master SecP PriP])
        Subsystem: ABIT Computer Corp.: Unknown device 1c02
        Flags: bus master, 66MHz, fast devsel, latency 0
        I/O ports at f000 [size=16]
        Capabilities: [44] Power Management version 2

0000:00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1) (prog-if 00 [Normal decode])
        Flags: bus master, 66MHz, medium devsel, latency 32
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
        Memory behind bridge: e4000000-e5ffffff
        Prefetchable memory behind bridge: d0000000-d7ffffff

0000:01:06.0 Multimedia video controller: Conexant Winfast TV2000 XP (rev 05)
        Subsystem: Hauppauge computer works Inc.: Unknown device 3401
        Flags: bus master, medium devsel, latency 32, IRQ 18
        Memory at e6000000 (32-bit, non-prefetchable) [size=16M]
        Capabilities: [44] Vital Product Data
        Capabilities: [4c] Power Management version 2

0000:01:06.1 Multimedia controller: Conexant: Unknown device 8811 (rev 05)
        Subsystem: Hauppauge computer works Inc.: Unknown device 3401
        Flags: bus master, medium devsel, latency 32, IRQ 10
        Memory at e7000000 (32-bit, non-prefetchable) [size=16M]
        Capabilities: [4c] Power Management version 2

0000:01:07.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01)
        Subsystem: Hauppauge computer works Inc. WinTV PVR 250
        Flags: bus master, medium devsel, latency 64, IRQ 20
        Memory at d8000000 (32-bit, prefetchable) [size=64M]
        Capabilities: [44] Power Management version 2

0000:01:0a.0 Network controller: Intersil Corporation Prism 2.5 Wavelan chipset (rev 01)
        Subsystem: 3Com Corporation: Unknown device 0001
        Flags: bus master, medium devsel, latency 32, IRQ 18
        Memory at dc000000 (32-bit, prefetchable) [size=4K]
        Capabilities: [dc] Power Management version 2

0000:02:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5200] (rev a1) (prog-if 00 [VGA])
        Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 12
        Memory at e4000000 (32-bit, non-prefetchable) [size=16M]
        Memory at d0000000 (32-bit, prefetchable) [size=128M]
        Expansion ROM at e5000000 [disabled] [size=128K]
        Capabilities: [60] Power Management version 2
        Capabilities: [44] AGP version 3.0


XFX86config
Code:
ection "ServerLayout"
        Identifier     "XFree86 Configured"
        Screen      0  "Screen0" 0 0
        InputDevice    "Keyboard0" "CoreKeyboard"
        InputDevice    "PS/2 Mouse" "CorePointer"
EndSection

Section "ServerFlags"
        Option "AllowMouseOpenFail"  "true"
        Option  "NoPM"  "true"
EndSection

Section "Files"
        RgbPath      "/usr/X11R6/lib/X11/rgb"
        ModulePath   "/usr/X11R6/lib/modules"
        FontPath     "/usr/X11R6/lib/X11/fonts/misc:unscaled"
        FontPath     "/usr/X11R6/lib/X11/fonts/misc"
        FontPath     "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
        FontPath     "/usr/X11R6/lib/X11/fonts/75dpi"
        FontPath     "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
        FontPath     "/usr/X11R6/lib/X11/fonts/100dpi"
        FontPath     "/usr/X11R6/lib/X11/fonts/Speedo"
        FontPath     "/usr/X11R6/lib/X11/fonts/Type1"
EndSection

Section "Module"
#       Load  "ddc"  # ddc probing of monitor
#       Load  "GLcore"
        Load  "dbe"
        Load  "v4l"
        Load  "extmod"
        Load  "glx"
        Load  "bitmap" # bitmap-fonts
        Load  "speedo"
        Load  "type1"
        Load  "freetype"
        Load  "record"
EndSection

Section "InputDevice"
        Identifier  "Keyboard0"
        Driver      "keyboard"
        Option      "CoreKeyboard"
        Option "XkbRules" "xfree86"
        Option "XkbModel" "pc105"
        Option "XkbLayout" "us"
EndSection

Section "InputDevice"
        Identifier  "PS/2 Mouse"
        Driver      "mouse"
        Option      "Protocol" "IMPS/2"
        Option      "ZAxisMapping" "4 5"
        Option      "Device" "/dev/psaux"
        Option      "Emulate3Buttons" "true"
        Option      "Emulate3Timeout" "70"
        Option      "SendCoreEvents"  "true"
EndSection

# Auto-generated by KNOPPIX mkxf86config

Section "Monitor"
        Identifier   "Monitor0"
        VendorName      "IBM"
        ModelName       "IBM252f"
        HorizSync 28.0 - 96.0
        VertRefresh 50 - 75

   # 1280x1024 @ 70.00 Hz (GTF) hsync: 74.62 kHz; pclk: 128.94 MHz
  Modeline "1280x1024_70.00"  128.94  1280 1368 1504 1728  1024 1025 1028 1066  -HSync +Vsync
 # 800x600 @ 70.00 Hz (GTF) hsync: 43.75 kHz; pclk: 45.50 MHz
  Modeline "800x600_70.00"  45.50  800 840 920 1040  600 601 604 625  -HSync +Vsync
EndSection

Section "Device"
        Identifier  "Card0"
        Driver      "nvidia"
      BoardName   "nVidia GeForce FX5200"
        #Option     "RenderAccel" "1"

        Option "ConnectedMonitor" "Monitor0"
    Option      "MetaModes"        "1280x1024_70.00" "800x600_70.00"

        Option "NoLogo" "1"
        # sw_cursor is needed for some ati and radeon cards
        #Option     "sw_cursor"
        # Other options...
        #Option     "hw_cursor"
        #Option     "NoAccel"
        #Option     "ShowCache"
        #Option     "ShadowFB"
        #Option     "UseFBDev"
        #Option     "Rotate"
        # The following line is auto-generated by KNOPPIX mkxf86config
        #BusID      "PCI:1:0:0"
EndSection

Section "Screen"
        Identifier "Screen0"
        Device     "Card0"
        Monitor    "Monitor0"
        DefaultColorDepth 24
               SubSection "Display"
                Depth     24
                Modes "1280x1024_70.00"  "800x600_70.00"
        EndSubSection
       
EndSection

#Section "DRI"
#       Mode 0666
#EndSection


Top
 Profile  
 
 Post subject:
PostPosted: Mon Mar 27, 2006 6:05 pm 
Offline
Joined: Tue Feb 21, 2006 7:24 am
Posts: 396
Location: Dushanbe, Tajikistan
what was in /var/log/XFree86.0.log ?


Top
 Profile  
 
 Post subject: I had a similar issue
PostPosted: Tue Apr 04, 2006 4:45 am 
Offline
Joined: Sun Feb 26, 2006 9:41 pm
Posts: 14
I too had a hell of a time gettin X to run with my FX5200. My issue and apparently its not uncommon is a bad burn. With the image being as large as it is it seems to increase the failure rate, here is how I discovered my issue with the help of Xsecrets. the /usr/src/linux dir should have a complete source tree in it, mine only had like 6dirs, I tried to untar the /usr/src/kernel-source-2.6.15-chw-2 (or something like that) and the untarring returned "unexpected EOF"

Once I slowe the burn down from 24x to 8x everything went in cleanly with no problems


Top
 Profile  
 

Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 


All times are UTC - 6 hours




Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group

Theme Created By ceyhansuyu