I'm quite confused. I have got my remote control set up with LIRC and working well. I can go through the myth menus and change channels and everything. There is just one slight issue remaining: IF I go to watch a previously recorded show, no matter what button I press on the remote (except the button mapped to the escape key, which exits me back to the myth menu), I am prompted with the dialog "Are you sure you want to delete..." etc etc. No, I don't want to delete it, of course, I want to watch it. But not a single remote control button works like it should. Even pressing the button mapped to the enter key brings up the same dialog!
My lircrc file is as follows:
Code:
# lircrc.example.HauppaugeGrey-nativelirc
# 2003-09-17, Robert Kulagowski
# mailto:rkulagow@rocketmail.com
# Save this file in ~/.mythtv/lircrc
#begin
# prog = mythtv
# button = Off
# config = Esc
#end
#begin
# prog = mythtv
# button = Go
# Swap the PiP windows
# config = N
#end
begin
prog = mythtv
button = 1
config = 1
end
begin
prog = mythtv
button = 2
config = 2
end
begin
prog = mythtv
button = 3
config = 3
end
begin
prog = mythtv
button = 4
config = 4
end
begin
prog = mythtv
button = 5
config = 5
end
begin
prog = mythtv
button = 6
config = 6
end
begin
prog = mythtv
button = 7
config = 7
end
begin
prog = mythtv
button = 8
config = 8
end
begin
prog = mythtv
button = 9
config = 9
end
begin
prog = mythtv
button = 0
config = 0
end
begin
prog = mythtv
button = Menu
config = Esc
end
begin
prog = mythtv
button = Message
config = M
end
begin
prog = mythtv
button = *
config = D
end
begin
prog = mythtv
button = Display
config = I
end
# Note the "repeat =" strings in the volume and channel.
# This means that if you hold down the key, every nth instance will be
# passed. This depends on your system, so you may want to increase or
# decrease this and see what happens. repeat = 1 is probably too
# fast.
begin
prog = mythtv
button = VolDown
repeat = 3
config = F10
end
begin
prog = mythtv
button = VolUp
repeat = 3
config = F11
end
begin
prog = mythtv
button = ChanUp
repeat = 3
config = Up
end
begin
prog = mythtv
button = ChanDown
repeat = 3
config = Down
end
begin
prog = mythtv
button = Left
repeat = 3
config = Left
end
begin
prog = mythtv
button = Right
repeat = 3
config = Right
end
begin
prog = mythtv
button = Up
repeat = 3
config = Up
end
begin
prog = mythtv
button = Down
repeat = 3
config = Down
end
begin
prog = mythtv
button = Enter
config = Return
end
begin
prog = mythtv
button = Mute
config = F9
end
#begin
# prog = mythtv
# Change focus for PiP (to change channel in the other window)
# button = Blank
# config = B
#end
#begin
# prog = mythtv
# Toggle PiP on/off
# button = Full
# config = V
#end
#begin
# prog = mythtv
# button = Rew
# config = Left
#end
#begin
# prog = mythtv
# button = Play
# config = P
#end
#begin
# prog = mythtv
# button = FFW
# config = Right
#end
#begin
# prog = mythtv
# button = Record
# config = R
#end
#begin
# prog = mythtv
# Teletext
# button = Stop
# config = T
#end
begin
prog = mythtv
button = #
config = P
end
begin
prog = mythtv
button = Button1
# Use for backwards commercial skip
config = Q
end
begin
prog = mythtv
button = Button2
# Use for forward commercial skip
config = Z
end
#MPlayer
begin
prog = mplayer
button = Menu
config = quit
end
begin
prog = mplayer
button = Display
config = osd
end
begin
prog = mplayer
button = Left
config = seek -10
repeat = 1
end
begin
prog = mplayer
button = Right
config = seek +10
repeat = 1
end
begin
prog = mplayer
button = Button1
config = seek -60
repeat = 1
end
begin
prog = mplayer
button = Button2
config = seek +60
repeat = 1
end
begin
prog = mplayer
button = Down
config = pause
end
begin
prog = mplayer
button = Down
config = pause
end
begin
prog = mplayer
button = VolUp
config = volume +1
repeat = 1
end
begin
prog = mplayer
button = VolDown
config = volume -1
repeat = 1
end
begin
prog=mplayer
button=Mute
config=mute
end