# /etc/lircd.conf
# this config file was automatically generated
# using lirc-0.7.0(hauppauge) on Tue Nov 30 00:38:32 2004
#
# contributed by
#
# brand:                       lirc.conf
# model no. of remote control:
# devices being controlled by this remote:
#

begin remote

  name  grayHauppauge
  bits           13
  flags RC5
  eps            30
  aeps          100

  one             0     0
  zero            0     0
  gap          200966
  repeat_bit    2

      begin codes
          Power                    0x00000000000017BD
          Go                       0x0000000000001FBB
          TV                       0x000000000000179C
          Videos                   0x0000000000001F98
          Music                    0x0000000000001799
          Pictures                 0x0000000000001F9A
          Guide                    0x000000000000179B
          Radio                    0x0000000000001F8C
          UP                       0x0000000000001794
          LEFT                     0x0000000000001F96
          RIGHT                    0x0000000000001797
          DOWN                     0x0000000000001F95
          OK                       0x00000000000017A5
          Back-Exit                0x0000000000001F9F
          Menu                     0x000000000000178D
          Prev-Channel             0x0000000000001F92
          Mute                     0x000000000000178F
          Volume-UP                0x0000000000001F90
          Volume-DOWN              0x0000000000001791
          Channel-UP               0x0000000000001FA0
          Channel-DOWN             0x00000000000017A1
          Record                   0x0000000000001FB7
          Stop                     0x00000000000017B6
          Rewind                   0x0000000000001FB2
          Forward                  0x00000000000017B4
          Play                     0x0000000000001FB5
          Previous                 0x00000000000017A4
          Next                     0x0000000000001F9E
          Pause                    0x00000000000017B0
          1                        0x0000000000001F81
          2                        0x0000000000001782
          3                        0x0000000000001F83
          4                        0x0000000000001784
          5                        0x0000000000001F85
          6                        0x0000000000001786
          7                        0x0000000000001F87
          8                        0x0000000000001788
          9                        0x0000000000001F89
          0                        0x0000000000001780
          star                     0x0000000000001F8A
          hash                     0x000000000000178E
          red                      0x0000000000001F8B
          green                    0x00000000000017AE
          yellow                   0x0000000000001FB8
          blue                     0x00000000000017A9
      end codes

end remote

# MythTV native LIRC config file for
# the grey Hauppauge remote
#
# By Jarod Wilson, 2003/12/21
# Amalgamated from Jeff Campbell's,
# .lircrc, the mythtv.org docs, and
# a few touches of my own. :)
#

# Channel Up
begin
prog = mythtv
button = Channel-UP
repeat = 3
config = Up
end

# Channel Down
begin
prog = mythtv
button = Channel-DOWN
repeat = 3
config = Down
end

# OK/Select
begin
prog = mythtv
button = OK
config = Space
end

# Play
begin
prog = mythtv
button = Play
config = Return
end

# Stop
begin
prog = mythtv
button = Stop
config = Esc
end

# Escape/Exit/Back
begin
prog = mythtv
button = Back-Exit
config = Esc
end

# Power Off/Exit
begin
prog = mythtv
button = Power
config = Esc
end

# Red means stop!
#begin
#prog = mythtv
#button = red
#config = Esc
#end

# Pause
begin
prog = mythtv
button = Pause
repeat = 3
config = P
end

# Mute
begin
prog = mythtv
button = Mure
repeat = 3
config = F9
end

begin
prog = mythtv
button = UP
repeat = 3
config = Up
end

begin
prog = mythtv
button = RIGHT
repeat = 3
config = Right
end

begin
prog = mythtv
button = DOWN
repeat = 3
config = Down
end

begin
prog = mythtv
button = LEFT
repeat = 3
config = Left
end




# Fast forward (30 sec default)
begin
prog = mythtv
button = Rewind
repeat = 3
config = Left
end

# Rewind (10 sec default)
begin
prog = mythtv
button = Forward
repeat = 3
config = Right
end

# Skip forward (10 min default)
begin
prog = mythtv
button = Next
repeat = 3
config = PgDown
end

# Skip backward (10 min default)
begin
prog = mythtv
button = Previous
repeat = 3
config = PgUp
end

# Record
begin
prog = mythtv
button = Record
repeat = 3
config = R
end

# Delete
begin
prog = mythtv
button = red
repeat = 3
config = D
end

# OSD browse
begin
prog = mythtv
button = green
repeat = 3
config = O
end

# Display EPG while in live TV,
# View selected show while in EPG
begin
prog = mythtv
button = Menu
repeat = 3
config = M
end

# Scroll up
begin
prog = mythtv
button = Volume-UP
repeat = 3
config = Right
end

# Scroll down
begin
prog = mythtv
button = Volume-DOWN
repeat = 3
config = Left
end

# Bring up OSD info
begin
prog = mythtv
button = Go
repeat = 3
config = I
end

# Change display aspect ratio
#begin
#prog = mythtv
#button = FULL
#repeat = 3
#config = W
#end

# Seek to previous commercial cut point
begin
prog = mythtv
button = yellow
repeat = 3
config = Q
end

# Seek to next commercial cut point
begin
prog = mythtv
button = blue
repeat = 3
config = Z
end

# Numbers 0-9

begin
prog = mythtv
button = 0
repeat = 3
config = 0
end

begin
prog = mythtv
button = 1
repeat = 3
config = 1
end

begin
prog = mythtv
button = 2
repeat = 3
config = 2
end

begin
prog = mythtv
button = 3
repeat = 3
config = 3
end

begin
prog = mythtv
button = 4
repeat = 3
config = 4
end

begin
prog = mythtv
button = 5
repeat = 3
config = 5
end

begin
prog = mythtv
button = 6
repeat = 3
config = 6
end

begin
prog = mythtv
button = 7
repeat = 3
config = 7
end

begin
prog = mythtv
button = 8
repeat = 3
config = 8
end

begin
prog = mythtv
button = 9
repeat = 3
config = 9
end


### MPlayer lirc setup

# Show OSD
begin
prog = mplayer
button = Menu
repeat = 3
config = osd
end

# Pause playback
begin
prog = mplayer
button = Pause
repeat = 3
config = pause
end

# Skip ahead a minute if playing
# If paused, resume playing
begin
prog = mplayer
button = Play
repeat = 3
config = seek +1
end

# Stop playback and exit
begin
prog = mplayer
button = Stop
repeat = 3
config = quit
end

# Mute
begin
prog = mplayer
button = Mute
repeat = 3
config = mute
end

# Seek back 10 seconds
begin
prog = mplayer
button = Rewind
repeat = 3
config = seek -10
end

# Seek forward 30 seconds
begin
prog = mplayer
button = Forward
repeat = 3
config = seek +30
end

# Quit
begin
prog = mplayer
button = Back-Exit
repeat = 3
config = quit
end

# Seek forward 10 minutes
begin
prog = mplayer
button = Next
repeat = 3
config = seek +600
end

# Seek backward 10 minutes
begin
prog = mplayer
button = Previous
repeat = 3
config = seek -600
end

# Toggle full-screen
#begin
#prog = mplayer
#button = FULL
#repeat = 3
#config = vo_fullscreen
#end

# MythTV native LIRC config file for
# the grey Hauppauge remote
#
#   /home/mythtv/.mythtv/lircrc
#
# By Jarod Wilson, 2003/12/21
# Amalgamated from Jeff Campbell's,
# .lircrc, the mythtv.org docs, and
# a few touches of my own. :)
#

# Channel Up
begin
prog = mythtv
button = Channel-UP
repeat = 3
config = Up
end