I have now update the bios with the latest release but nothing has changed i still got that black screen. I have passed the errors from mythbackend and dmesg if that can help ?
I get the following error from mythtv backend when displaying live tv:
Code:
2005-07-29 18:35:31.582 MainServer::HandleAnnounce Playback
2005-07-29 18:35:31.582 adding: mythtv as a client (events: 0)
2005-07-29 18:35:31.599 MainServer::HandleAnnounce Playback
2005-07-29 18:35:31.599 adding: mythtv as a client (events: 1)
2005-07-29 18:35:31.611 MainServer::HandleAnnounce Playback
2005-07-29 18:35:31.611 adding: mythtv as a client (events: 0)
2005-07-29 18:35:31.627 MainServer::HandleAnnounce Playback
2005-07-29 18:35:31.627 adding: mythtv as a client (events: 0)
2005-07-29 18:35:31.634 adding: mythtv as a remote ringbuffer
2005-07-29 18:35:31.644 Changing from None to WatchingLiveTV
2005-07-29 18:35:31.655 Can't enable VBI recording
vbi: Invalid argument
error reading from: /dev/video1
read: Input/output error
error reading from: /dev/video1
read: Input/output error
error reading from: /dev/video1
read: Input/output error
error reading from: /dev/video1
read: Input/output error
2005-07-29 18:35:46.692 Couldn't read data from the capture card in 15 seconds. Stopping.
2005-07-29 18:35:46.723 Changing from WatchingLiveTV to None
error reading from: /dev/video1
read: Input/output error
dmesg displayes the following .... i can se there are som errors but i don't know how to fix them:
Code:
PnPBIOS: Found PnP BIOS installation structure at 0xc00f7ad0
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x68ab, dseg 0xf0000
PnPBIOS: Missing SMALL_TAG_ENDDEP tag
PnPBIOS: Missing SMALL_TAG_ENDDEP tag
PnPBIOS: Missing SMALL_TAG_ENDDEP tag
PnPBIOS: Missing SMALL_TAG_ENDDEP tag
PnPBIOS: Missing SMALL_TAG_ENDDEP tag
PnPBIOS: 14 nodes reported by PnP BIOS; 14 recorded by driver
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 18
ACPI: PCI interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 20
ACPI: PCI interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 20
ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 21
ACPI: PCI interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 21
ACPI: PCI interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 21
ACPI: PCI interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 21
ACPI: PCI interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 21
ACPI: PCI interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 23
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI interrupt 0000:02:08.0[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI interrupt 0000:02:09.0[A] -> GSI 17 (level, low) -> IRQ 17
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
SELinux: Registering netfilter hooks
Initializing Cryptographic API
PCI: Via IRQ fixup for 0000:00:10.3, from 10 to 5
PCI: Via IRQ fixup for 0000:00:10.2, from 10 to 5
PCI: Via IRQ fixup for 0000:00:10.1, from 11 to 5
PCI: Via IRQ fixup for 0000:00:10.0, from 11 to 5
vesafb: framebuffer at 0xc0000000, mapped to 0xe0880000, size 3072k
vesafb: mode is 1024x768x16, linelength=2048, pages=0
vesafb: protected mode interface info at c000:0eb9
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.4-2004/02/19-spock-0.1: looking for picture... no good signature found.
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Using anticipatory io scheduler
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:0f.1
ACPI: PCI interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 20
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: Maxtor 6Y160P0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: HL-DT-ST CD-RW GCE-8240B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
ide2: Wait for ready failed before probe !
Probing IDE interface ide3...
ide3: Wait for ready failed before probe !
Probing IDE interface ide4...
ide4: Wait for ready failed before probe !
Probing IDE interface ide5...
ide5: Wait for ready failed before probe !
hda: max request size: 1024KiB
hda: 320173056 sectors (163928 MB) w/7936KiB Cache, CHS=19929/255/63
hda: cache flushes supported
hda: hda1 hda2 hda3 hda4
libata version 1.02 loaded.
sata_via version 0.20
ACPI: PCI interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 20
sata_via(0000:00:0f.0): routed to hard irq line 10
ata1: SATA max UDMA/133 cmd 0xE800 ctl 0xE402 bmdma 0xD800 irq 20
ata2: SATA max UDMA/133 cmd 0xE000 ctl 0xDC02 bmdma 0xD808 irq 20
ata1: no device found (phy stat 00000000)
scsi0 : sata_via
ata2: no device found (phy stat 00000000)
scsi1 : sata_via
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
input: ImExPS/2 Logitech Explorer Mouse on isa0060/serio1
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
NET: Registered protocol family 1
NET: Registered protocol family 15
ACPI: (supports S0 S1 S4 S5)
ACPI wakeup devices:
PCI0 UAR1 USB1 USB2 USB3 USB4 EHCI USBD PS2M PS2K AC9 MC9 ILAN SLPB
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Trying to move old root to /initrd ... <6>kjournald starting. Commit interval 5 seconds
okay
Freeing unused kernel memory: 196k freed
Adding 787176k swap on /dev/hda2. Priority:-1 extents:1
EXT3 FS on hda1, internal journal
hdc: ATAPI 40X CD-ROM CD-R/RW drive, 8192kB Cache
Uniform CD-ROM driver Revision: 3.20
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.0: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
uhci_hcd 0000:00:10.0: irq 21, io base 0000c000
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.1: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
uhci_hcd 0000:00:10.1: irq 21, io base 0000c400
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#3)
uhci_hcd 0000:00:10.2: irq 21, io base 0000c800
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#4)
uhci_hcd 0000:00:10.3: irq 21, io base 0000cc00
uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
ieee1394: Initialized config rom entry `ip1394'
sbp2: $Rev: 1219 $ Ben Collins <bcollins@debian.org>
Real Time Clock Driver v1.12
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Processor [CPU1] (supports C1)
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
parport: PnPBIOS parport detected.
pnp: Device 00:0a disabled.
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected VIA KT400/KT400A/KT600 chipset
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: AGP aperture is 64M @ 0xe0000000
gameport: pci0000:00:0a.1 speed 1193 kHz
via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
ACPI: PCI interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 23
eth0: VIA Rhine II at 0xdfffbd00, 00:0b:6a:6d:fb:1a, IRQ 23.
eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 4de1.
ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 18
NET: Registered protocol family 17
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
ttyS1: LSR safety check engaged!
ttyS1: LSR safety check engaged!
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Disabled Privacy Extensions on device c0465bc0(lo)
eth0: link up, 100Mbps, full-duplex, lpa 0x4DE1
Linux video capture interface: v1.00
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.3.6 (o) loading
ivtv: Linux version: 2.6.9-chw-4 SMP preempt 586 gcc-3.3
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: Autodetected WinTV PVR 150 card
ivtv: Found an iTVC16 based chip
ACPI: PCI interrupt 0000:02:08.0[A] -> GSI 16 (level, low) -> IRQ 16
ivtv: Unreasonably low latency timer, setting to 64 (was 32)
ivtv: VIA PCI device: 0x3189 vendor: 0x1106
tveeprom: Hauppauge: model = 23559, rev = D591, serial# = 2990138
tveeprom: tuner = Philips FQ1216AME MK4 (idx = 91, type = 56)
tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17)
tveeprom: audio_processor = MSP3410D (type = 5)
ivtv: i2c attach [client=tveeprom[50],ok]
ivtv: Tuner Type 56, Tuner formats 0x00400e17, Radio: yes, Model 0x00915651, Revision 0x00000000
ivtv: PAL tuner detected
ivtv: Radio detected
tuner: Ignoring new-style parameters in presence of obsolete ones
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
ivtv: i2c attach [client=(tuner unset),ok]
cx25840: Unknown parameter `no_black_magic'
cx25840: starting probe for adapter ivtv i2c driver #0 (0x10005)
cx25840: detecting cx25840 client on address 0x88
cx25840: cx25843-23 found. Initializing...
cx25840: requesting /lib/modules/HcwMakoA.ROM
cx25840: firmware loaded
ivtv: i2c attach [client=cx25840[50],ok]
ivtv: i2c attach [client=wm8775[50],ok]
tda9885/6/7: chip found @ 0x86
ivtv: i2c attach [client=tda9887,ok]
ivtv: Encoder revision: 0x02040011
ivtv: Configuring WinTV PVR 150 card with 5 streams
ivtv: Registered v4l2 device, streamtype 0 minor 0
ivtv: Create DMA stream 0 using 128 32768 byte buffers 0 kbytes total
ivtv: Registered v4l2 device, streamtype 1 minor 32
ivtv: Create DMA stream 1 using 161 12960 byte buffers 0 kbytes total
ivtv: Registered v4l2 device, streamtype 2 minor 224
ivtv: Create DMA stream 2 using 165 12635 byte buffers 0 kbytes total
ivtv: Registered v4l2 device, streamtype 3 minor 24
ivtv: Create DMA stream 3 using 455 4608 byte buffers 0 kbytes total
ivtv: Registered v4l2 device, streamtype 4 minor 64
ivtv: Create stream 4
ivtv: Setting Tuner 57
tuner: type set to 57 (Philips FQ1236A MK4) by ivtv i2c driver #0
cx25840: decoder set norm PAL
cx25840: decoder set input (6)
cx25840: now setting Tuner input
cx25840: set audio input (0)
ivtv: Switching standard to PAL.
cx25840: decoder set norm PAL
ivtv: Initialized WinTV PVR 150, card #0
ivtv: Autodetected WinTV PVR 150 card
ivtv: Found an iTVC16 based chip
ACPI: PCI interrupt 0000:02:09.0[A] -> GSI 17 (level, low) -> IRQ 17
ivtv: Unreasonably low latency timer, setting to 64 (was 32)
ivtv: VIA PCI device: 0x3189 vendor: 0x1106
tveeprom: Hauppauge: model = 23559, rev = D591, serial# = 2990138
tveeprom: tuner = Philips FQ1216AME MK4 (idx = 91, type = 56)
tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17)
tveeprom: audio_processor = MSP3410D (type = 5)
ivtv: i2c attach [client=tveeprom[50],ok]
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #1
ivtv: i2c attach [client=(tuner unset),ok]
cx25840: starting probe for adapter ivtv i2c driver #1 (0x10005)
ivtv: i2c attach [client=wm8775[50],ok]
tda9885/6/7: chip found @ 0x86
ivtv: i2c attach [client=tda9887,ok]
ivtv: Tuner Type 56, Tuner formats 0x00400e17, Radio: yes, Model 0x00915651, Revision 0x00000000
ivtv: Radio detected
ivtv: ivtv_enc_thread: pid = 2139, itv = 0xe0f07620
ivtv: ivtv_enc_vbi_thread: pid = 2140, itv = 0xe0f07620
ivtv: Encoder revision: 0x02040011
ivtv: Configuring WinTV PVR 150 card with 5 streams
ivtv: Registered v4l2 device, streamtype 0 minor 1
ivtv: Create DMA stream 0 using 128 32768 byte buffers 0 kbytes total
ivtv: Registered v4l2 device, streamtype 1 minor 33
ivtv: Create DMA stream 1 using 161 12960 byte buffers 0 kbytes total
ivtv: Registered v4l2 device, streamtype 2 minor 225
ivtv: Create DMA stream 2 using 165 12635 byte buffers 0 kbytes total
ivtv: Registered v4l2 device, streamtype 3 minor 25
ivtv: Create DMA stream 3 using 455 4608 byte buffers 0 kbytes total
ivtv: Registered v4l2 device, streamtype 4 minor 65
ivtv: Create stream 4
ivtv: Setting Tuner 57
tuner: type set to 57 (Philips FQ1236A MK4) by ivtv i2c driver #1
ivtv: i2c client addr: 0x44 not found for command 1074029571!
ivtv: i2c client addr: 0x44 not found for command 1074029572!
ivtv: i2c client addr: 0x44 not found for command 1074029678!
ivtv: Switching standard to PAL.
ivtv: i2c client addr: 0x44 not found for command 1074029571!
ivtv: Initialized WinTV PVR 150, card #1
ivtv: ==================== END INIT IVTV ====================
cx25840: decoder set size: ignoring bad config request Hsrc=720 Vsrc=487 width=720 height=576
ivtv: i2c client addr: 0x44 not found for command 1075864679!
ivtv: ivtv_enc_thread: pid = 2203, itv = 0xe0f2a960
ivtv: ivtv_enc_vbi_thread: pid = 2204, itv = 0xe0f2a960
eth0: no IPv6 routers present
ts: Compaq touchscreen protocol output
input: PC Speaker
cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI: PCI interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 21
ehci_hcd 0000:00:10.4: VIA Technologies, Inc. USB 2.0
ehci_hcd 0000:00:10.4: irq 21, pci mem e0d92e00
ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:10.4: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-6629 Wed Nov 3 13:12:51 PST 2004
agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
agpgart: Device is in legacy mode, falling back to 2.x
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
agpgart: Device is in legacy mode, falling back to 2.x
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
ivtv: i2c client addr: 0x44 not found for command 2150392936!
ivtv: i2c client addr: 0x44 not found for command 1074684935!
ivtv: i2c client addr: 0x44 not found for command 2150392936!
ivtv: i2c client addr: 0x44 not found for command 1074684935!
ivtv: i2c client addr: 0x44 not found for command 2150392936!
ivtv: i2c client addr: 0x44 not found for command 1074684935!
ivtv: i2c client addr: 0x44 not found for command 2150392936!
ivtv: i2c client addr: 0x44 not found for command 1074684935!
ivtv: i2c client addr: 0x44 not found for command 1075864679!
ivtv: i2c client addr: 0x44 not found for command 1074029668!
ivtv: Sliced VBI not supported for cx25840 so no vbi re-insertion possible yet
ivtv: Allocate DMA stream 0 using 128 32768 byte buffers 4194304 kbytes total
ivtv: i2c client addr: 0x44 not found for command 1074029670!
ivtv: Setup VBI API header 0x0000bd0c pkts 1 buffs 48 ln 34 sz 64
ivtv: Setup VBI start 0x0018ea04 frames 48 fpi 1 lines 0x00000140
ivtv: i2c client addr: 0x44 not found for command 1074029574!
ivtv: i2c client addr: 0x44 not found for command 1074029574!
ivtv: Timeout waiting for data! Encoder buffers have 0x00000000 bytes trans_id = 0.
ivtv: Check digitizer Sync
ivtv: Resetting digitizer
ivtv: i2c client addr: 0x44 not found for command 25701!
ivtv: Failed reseting digitizer!
ivtv: Capture has failed!!! Try again.
ivtv: i2c client addr: 0x44 not found for command 1074029670!
ivtv: Setup VBI API header 0x0000bd0c pkts 1 buffs 48 ln 34 sz 64
ivtv: Setup VBI start 0x0018ea04 frames 48 fpi 1 lines 0x00000140
ivtv: i2c client addr: 0x44 not found for command 1074029574!
ivtv: i2c client addr: 0x44 not found for command 1074029574!
ivtv: Timeout waiting for data! Encoder buffers have 0x00000000 bytes trans_id = 0.
ivtv: Check digitizer Sync
ivtv: Resetting digitizer
ivtv: i2c client addr: 0x44 not found for command 25701!
ivtv: Failed reseting digitizer!
ivtv: Capture has failed!!! Try again.
ivtv: i2c client addr: 0x44 not found for command 1074029670!
ivtv: Setup VBI API header 0x0000bd0c pkts 1 buffs 48 ln 34 sz 64
ivtv: Setup VBI start 0x0018ea04 frames 48 fpi 1 lines 0x00000140
ivtv: i2c client addr: 0x44 not found for command 1074029574!
ivtv: i2c client addr: 0x44 not found for command 1074029574!
ivtv: Timeout waiting for data! Encoder buffers have 0x00000000 bytes trans_id = 0.
ivtv: Check digitizer Sync
ivtv: Resetting digitizer
ivtv: i2c client addr: 0x44 not found for command 25701!
ivtv: Failed reseting digitizer!
ivtv: Capture has failed!!! Try again.
ivtv: i2c client addr: 0x44 not found for command 1074029670!
ivtv: Setup VBI API header 0x0000bd0c pkts 1 buffs 48 ln 34 sz 64
ivtv: Setup VBI start 0x0018ea04 frames 48 fpi 1 lines 0x00000140
ivtv: i2c client addr: 0x44 not found for command 1074029574!
ivtv: i2c client addr: 0x44 not found for command 1074029574!
ivtv: Timeout waiting for data! Encoder buffers have 0x00000000 bytes trans_id = 0.
ivtv: Check digitizer Sync
ivtv: Resetting digitizer
ivtv: i2c client addr: 0x44 not found for command 25701!
ivtv: Failed reseting digitizer!
ivtv: Capture has failed!!! Try again.
ivtv: i2c client addr: 0x44 not found for command 1074029670!
ivtv: Setup VBI API header 0x0000bd0c pkts 1 buffs 48 ln 34 sz 64
ivtv: Setup VBI start 0x0018ea04 frames 48 fpi 1 lines 0x00000140
ivtv: i2c client addr: 0x44 not found for command 1074029574!
ivtv: i2c client addr: 0x44 not found for command 1074029574!
ivtv: Timeout waiting for data! Encoder buffers have 0x00000000 bytes trans_id = 0.
ivtv: Check digitizer Sync
ivtv: Resetting digitizer
ivtv: i2c client addr: 0x44 not found for command 25701!
ivtv: Failed reseting digitizer!
ivtv: Capture has failed!!! Try again.
ivtv: i2c client addr: 0x44 not found for command 2150392936!
ivtv: i2c client addr: 0x44 not found for command 1074684935!
ivtv: i2c client addr: 0x44 not found for command 2150392936!
ivtv: i2c client addr: 0x44 not found for command 1074684935!
ivtv: i2c client addr: 0x44 not found for command 2150392936!
ivtv: i2c client addr: 0x44 not found for command 1074684935!
ivtv: i2c client addr: 0x44 not found for command 2150392936!
ivtv: i2c client addr: 0x44 not found for command 1074684935!
ivtv: i2c client addr: 0x44 not found for command 1075864679!
ivtv: i2c client addr: 0x44 not found for command 1074029668!
ivtv: Sliced VBI not supported for cx25840 so no vbi re-insertion possible yet
ivtv: Allocate DMA stream 0 using 128 32768 byte buffers 4194304 kbytes total
ivtv: i2c client addr: 0x44 not found for command 1074029670!
ivtv: Setup VBI API header 0x0000bd0c pkts 1 buffs 48 ln 34 sz 64
ivtv: Setup VBI start 0x0018ea04 frames 48 fpi 1 lines 0x00000140
ivtv: i2c client addr: 0x44 not found for command 1074029574!
ivtv: i2c client addr: 0x44 not found for command 1074029574!
ivtv: Timeout waiting for data! Encoder buffers have 0x00000000 bytes trans_id = 0.
ivtv: Check digitizer Sync
ivtv: Resetting digitizer
ivtv: i2c client addr: 0x44 not found for command 25701!
ivtv: Failed reseting digitizer!
ivtv: Capture has failed!!! Try again.
ivtv: i2c client addr: 0x44 not found for command 1074029670!
ivtv: Setup VBI API header 0x0000bd0c pkts 1 buffs 48 ln 34 sz 64
ivtv: Setup VBI start 0x0018ea04 frames 48 fpi 1 lines 0x00000140
ivtv: i2c client addr: 0x44 not found for command 1074029574!
ivtv: i2c client addr: 0x44 not found for command 1074029574!
ivtv: Timeout waiting for data! Encoder buffers have 0x00000000 bytes trans_id = 0.
ivtv: Check digitizer Sync
ivtv: Resetting digitizer
ivtv: i2c client addr: 0x44 not found for command 25701!
ivtv: Failed reseting digitizer!
ivtv: Capture has failed!!! Try again.
ivtv: i2c client addr: 0x44 not found for command 1074029670!
ivtv: Setup VBI API header 0x0000bd0c pkts 1 buffs 48 ln 34 sz 64
ivtv: Setup VBI start 0x0018ea04 frames 48 fpi 1 lines 0x00000140
ivtv: i2c client addr: 0x44 not found for command 1074029574!
ivtv: i2c client addr: 0x44 not found for command 1074029574!
ivtv: Timeout waiting for data! Encoder buffers have 0x00000000 bytes trans_id = 0.
ivtv: Check digitizer Sync
ivtv: Resetting digitizer
ivtv: i2c client addr: 0x44 not found for command 25701!
ivtv: Failed reseting digitizer!
ivtv: Capture has failed!!! Try again.
ivtv: i2c client addr: 0x44 not found for command 1074029670!
ivtv: Setup VBI API header 0x0000bd0c pkts 1 buffs 48 ln 34 sz 64
ivtv: Setup VBI start 0x0018ea04 frames 48 fpi 1 lines 0x00000140
ivtv: i2c client addr: 0x44 not found for command 1074029574!
ivtv: i2c client addr: 0x44 not found for command 1074029574!
ivtv: Timeout waiting for data! Encoder buffers have 0x00000000 bytes trans_id = 0.
ivtv: Check digitizer Sync
ivtv: Resetting digitizer
ivtv: i2c client addr: 0x44 not found for command 25701!
ivtv: Failed reseting digitizer!
ivtv: Capture has failed!!! Try again.
ivtv: i2c client addr: 0x44 not found for command 1074029670!
ivtv: Setup VBI API header 0x0000bd0c pkts 1 buffs 48 ln 34 sz 64
ivtv: Setup VBI start 0x0018ea04 frames 48 fpi 1 lines 0x00000140
ivtv: i2c client addr: 0x44 not found for command 1074029574!
ivtv: i2c client addr: 0x44 not found for command 1074029574!
ivtv: Timeout waiting for data! Encoder buffers have 0x00000000 bytes trans_id = 0.
ivtv: Check digitizer Sync
ivtv: Resetting digitizer
ivtv: i2c client addr: 0x44 not found for command 25701!
ivtv: Failed reseting digitizer!
ivtv: Capture has failed!!! Try again.
ivtv: i2c client addr: 0x44 not found for command 2150392936!
ivtv: i2c client addr: 0x44 not found for command 1074684935!
ivtv: i2c client addr: 0x44 not found for command 2150392936!
ivtv: i2c client addr: 0x44 not found for command 1074684935!
ivtv: i2c client addr: 0x44 not found for command 2150392936!
ivtv: i2c client addr: 0x44 not found for command 1074684935!
ivtv: i2c client addr: 0x44 not found for command 2150392936!
ivtv: i2c client addr: 0x44 not found for command 1074684935!
ivtv: i2c client addr: 0x44 not found for command 1074029574!
tuner: TV freq (268370270.56) out of range (44-958)
ivtv: i2c client addr: 0x44 not found for command 1074029574!
cx25840: decoder set picture bright=128 contrast=63 saturation=64 hue=0
cx25840: decoder set picture bright=128 contrast=63 saturation=63 hue=0
cx25840: decoder set picture bright=127 contrast=63 saturation=63 hue=0
cx25840: decoder set picture bright=127 contrast=63 saturation=63 hue=0
cx25840: decoder disable output
tuner: TV freq (268370270.56) out of range (44-958)
cx25840: decoder enable output
cx25840: decoder set norm PAL
cx25840: decoder set input (6)
cx25840: now setting Tuner input
cx25840: set audio input (0)
ivtv: i2c client addr: 0x44 not found for command 2150392936!
ivtv: i2c client addr: 0x44 not found for command 1074684935!
ivtv: i2c client addr: 0x44 not found for command 2150392936!
ivtv: i2c client addr: 0x44 not found for command 1074684935!
ivtv: i2c client addr: 0x44 not found for command 2150392936!
ivtv: i2c client addr: 0x44 not found for command 1074684935!
ivtv: i2c client addr: 0x44 not found for command 2150392936!
ivtv: i2c client addr: 0x44 not found for command 1074684935!
ivtv: i2c client addr: 0x44 not found for command 1074029574!
tuner: TV freq (268370270.56) out of range (44-958)
ivtv: i2c client addr: 0x44 not found for command 1074029574!
cx25840: decoder set picture bright=127 contrast=63 saturation=63 hue=0
cx25840: decoder set picture bright=127 contrast=63 saturation=63 hue=0
cx25840: decoder set picture bright=127 contrast=63 saturation=63 hue=0
cx25840: decoder set picture bright=127 contrast=63 saturation=63 hue=0
cx25840: decoder disable output
tuner: TV freq (268370270.56) out of range (44-958)
cx25840: decoder enable output
cx25840: decoder set norm PAL
cx25840: decoder set input (6)
cx25840: now setting Tuner input
cx25840: set audio input (0)
View unanswered posts
View active topics
Linux 
Print view
Previous topic Next topic 
LinHES Home
Board index
FAQ
Search
Login 
Register
)